Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages [centos man page]

LOGCONV.PL(1)						      General Commands Manual						     LOGCONV.PL(1)

NAME - analyzes Directory Server access log files SYNOPSIS [-h] [-d <rootDN>] [-s <size limit>] [-v] [-V] [-S <start time>] [-E <end time>] [-efcibaltnxgjuU] [ access log ... ... ] DESCRIPTION
Analyzes Directory Server access log files for specific information defined on the command line OPTIONS
A summary of options is included below: -h, --help help/usage -d, --rootDN <Directory Managers DN> DEFAULT -> cn=directory manager -D, --data <Location for temporary data files> DEFAULT -> /tmp TIP -> If there is not enough RAM, a RAM disk can be used instead: mkdir /dev/shm/logconv, and use this directory for the "-D" value. -s, --sizeLimit <Number of results to return per category> DEFAULT -> 20 -X, --excludeIP <IP address to exclude from connection stats> E.g. Load balancers -v, --version show version of tool Print version of the tool -S, --startTime <time to begin analyzing logfile from> Time to begin analyzing logfile from E.g. [28/Mar/2002:13:14:22 -0800] -E, --endTime <time to stop analyzing logfile> Time to stop analyzing logfile from E.g. [28/Mar/2002:13:24:62 -0800] -M, --reportFileMins <CSV output file> This option creates a CSV report for spreadsheets. -m, --reportFileSecs <CSV output file> This option creates a CSV report for spreadsheets. -B, --bind <ALL | ANONYMOUS | Bind DN > This generates a report based on either ALL bind dn's, anonymous binds, or a specific DN. -V, --verbose <enable verbose output - includes all stats listed below except U> Verbose output -[efcibaltnxgjuU] e Error Code stats f Failed Login Stats c Connection Code Stats i Client Stats b Bind Stats a Search Base Stats l Search Filter Stats t Etime Stats n Nentries Stats x Extended Operations r Most Requested Attribute Stats g Abandoned Operation Stats j Recommendations u Unindexed Search Stats (very detailed) y Connection Latency Stats p Open Connection ID Stats U Unindexed Search Summary USAGE
Examples: -s 10 -V access -d "cn=directory manager" /export/server4/slapd-host/logs/access* -s 50 -ibgju access* -S "[28/Mar/2002:13:14:22 -0800]" -E "[28/Mar/2002:13:50:05 -0800]" -e access AUTHOR was written by the 389 Project. REPORTING BUGS
Report bugs to COPYRIGHT
Copyright (C) 2001 Sun Microsystems, Inc. Used by permission. Copyright (C) 2008 Red Hat, Inc. This manual page was written by Michele Baldessari <>, for the Debian project (but may be used by others). This is free software. You may redistribute copies of it under the terms of the Directory Server license found in the LICENSE file of this software distribution. This license is essentially the GNU General Public License version 2 with an exception for plug-in distribution. May 18, 2008 LOGCONV.PL(1)

Check Out this Related Man Page

uurate(1)						      General Commands Manual							 uurate(1)

uurate - Report Taylor UUCP statistics SYNOPSIS
uurate [ -acdefhipqtvx ] [ -s host ] [ -I config ][ logfile... ] or simply, uurate for a traffic summary report. DESCRIPTION
The uurate command provides tabular summary reports on the operation of the Taylor UUCP system. Data is taken from the currently active log files, standard input, or from a list of log files given on the command line. Output is in the form of tabular reports summarizing call, file transfer, and command execution (uuxqt) activity. The log and stats files given to uurate must be in the ``Taylor'' or ``V2'' format. Also, note that call and file transfer activities are logged in separate files, nominally called Log and Stats, respectively. For reports to be meaningful, the Log and Stats files should be given to uurate together, and cover the same time period. If neither the -i or -I option nor any logfile options are given, uurate defaults to taking its input from the current Taylor Log and Stats files. The names are either as defined at compilation time, in case there is no config file, or taken from the arguments of the keywords logfile and statfile when encountered in the config file. This is the normal mode of operation. The reporting options described below can be used to select the set of reports desired. If no options are given, a summary report is dis- played. If there is no relevant data for a particular report or host, that report or host will be suppressed. OPTIONS
The following options may be given to uurate: -a All reports. Identical to -cfexp. -c Report on call statistics. Requires data from a Log file. -d will print the default config file to be used. -e Report on efficiency (total connect time versus time spent transferring files). Requires data from both a Log and a Stats file, and they must span the same time period. -f Report on file transfer statistics. Requires data from a Stats file. -h will print a short help information. -i tells uurate to read any logfile information from standard input. -p report on protocol errors and packets sent/received -q do not print the Environment information, -t All reports. Identical to -cfexp. plus the Compact summary. -v will print the version id string -x Report on remote execution requests (e.g., rmail). Requires data from a Log file. -s host Restrict report output to host. -I config file an alternate config file may be passed by this option. DESCRIPTION OF REPORTS
There are four reports available: the call, file transfer, efficiency, and remote execution reports. Each may be selected by a command line option. All reports may be selected via the options -a or -t. If no report selection options are given, uurate displays a compact traffic summary report (see below). Summary report If no report options are given, uurate displays a traffic summary report. This is particularly useful in daily cron jobs which report on errors and the like. Traffic statistics for each active system is reported on a single line. If more than one system was active, a 'totals' line is included at the end of the report. Protocol packet report The protocol report gives statistics on min/max packet and window sizes used during transmission. Further on data is collected for packets transferred. The data is collected for each host/protocol type. The fields are described below: site UUCP node name of neighbor host system, typ Type of protocol used Min minimum packet/window size Max maximum packet/window size sent packets sent resent packets resent received packets received Protocol error report The protocol report gives statistics on packet errors during transmission. The data is collected for each host/protocol type. The fields are described below: site UUCP node name of neighbor host system, typ Type of protocol used header number of errors in header checksum number of checksum errors order number of order errors resent number packets resent rem-reject packets that the remote site rejected Call report The call report gives statistics on inbound and outbound calls for each active host system. The fields are described below: site UUCP node name of neighbor host system, succ. Successful calls attempted to/by that system, failed Failed calls to/by that system, total Total calls to/by that system, time Collected connect time (hh:mm:ss) for all calls, File transfer reports The file transfer reports give statistics on inbound and outbound file transfers (regardless of which end initiated the transfer) for each active host system. There are two reports, one for files sent to the remote system and one for files received from the remote system. The fields in each report are described below: site UUCP node name of neighbor host system files Number of files transferred Bytes/1000 Total size of files transferred given in thousands xfr time Total time (hh:mm:ss) spent on transfer the files, B/sec Average transfer rate (bytes/sec). Efficiency report The efficiency report describes the utilization of the links to each active remote system, giving the ratio of total connect time to the time spent actually transferring files. The fields are described below: site UUCP node name of neighbor host system connected Total connect time for that system (turn-around) xfr time Total file transfer time for that system overhead Connect time not used to transfer files, eff. % Ratio of connect time to transfer time (xfer*100/conn) Command executions report The remote execution report describes remotely requested command executions from each active host system, like rmail and rnews. Up to eight command names are displayed. If there are more, the rest will be put together in an `Misc.' column. The fields are described below: site UUCP node name of neighbor host system, (command) Number of requests of this command, Misc. Number of other requests, if more than eight. FILES The file names below may be changed at compilation time or by the configuration file, so these are only approximations. /usr/spool/uucp/Log V2/Taylor format call/execution log, /usr/spool/uucp/Stats V2/Taylor format file transfer log. SEE ALSO uucico(8) BUGS Does not understand other than V2/TAYLOR logging formats. Anyone care to volunteer to add the not mentioned? Scanning the arguments of logfile and statfile keywords in config should handle lines continued with the backslash as well. The failfm field in the call statistics table is always zero, unless something really serious happens, e.g. uucico got SIGQUIT or the whole system crashed. AUTHOR Robert B. Denny ( Loosely based on the DECUS UUCP program uurate by Mark Pizzolato. Modified by Stephan Niemz ( Modified by Klaus Dahlenburg ( uurate(1)
Man Page

Featured Tech Videos