GZIP(1) General Commands Manual GZIP(1)
gzip, gunzip, gzcat - compress or expand files
gzip [ -acdfhlLnNrtvV19 ] [-S suffix] [ name ... ]
gunzip [ -acfhlLnNrtvV ] [-S suffix] [ name ... ]
gzcat [ -fhLV ] [ name ... ]
Gzip reduces the size of the named files using Lempel-Ziv coding (LZ77). Whenever possible, each file is replaced by one with the exten-
sion .gz, while keeping the same ownership modes, access and modification times. (The default extension is -gz for VMS, z for MSDOS, OS/2
FAT, Windows NT FAT and Atari.) If no files are specified, or if a file name is "-", the standard input is compressed to the standard out-
put. Gzip will only attempt to compress regular files. In particular, it will ignore symbolic links.
If the compressed file name is too long for its file system, gzip truncates it. Gzip attempts to truncate only the parts of the file name
longer than 3 characters. (A part is delimited by dots.) If the name consists of small parts only, the longest parts are truncated. For
example, if file names are limited to 14 characters, gzip.msdos.exe is compressed to gzi.msd.exe.gz. Names are not truncated on systems
which do not have a limit on file name length.
By default, gzip keeps the original file name and timestamp in the compressed file. These are used when decompressing the file with the -N
option. This is useful when the compressed file name was truncated or when the time stamp was not preserved after a file transfer.
Compressed files can be restored to their original form using gzip -d or gunzip or gzcat. If the original name saved in the compressed
file is not suitable for its file system, a new name is constructed from the original one to make it legal.
gunzip takes a list of files on its command line and replaces each file whose name ends with .gz, -gz, .z, -z, _z or .Z and which begins
with the correct magic number with an uncompressed file without the original extension. gunzip also recognizes the special extensions .tgz
and .taz as shorthands for .tar.gz and .tar.Z respectively. When compressing, gzip uses the .tgz extension if necessary instead of trun-
cating a file with a .tar extension.
gunzip can currently decompress files created by gzip, zip, compress, compress -H or pack. The detection of the input format is automatic.
When using the first two formats, gunzip checks a 32 bit CRC. For pack, gunzip checks the uncompressed length. The standard compress format
was not designed to allow consistency checks. However gunzip is sometimes able to detect a bad .Z file. If you get an error when uncom-
pressing a .Z file, do not assume that the .Z file is correct simply because the standard uncompress does not complain. This generally
means that the standard uncompress does not check its input, and happily generates garbage output. The SCO compress -H format (lzh com-
pression method) does not include a CRC but also allows some consistency checks.
Files created by zip can be uncompressed by gzip only if they have a single member compressed with the 'deflation' method. This feature is
only intended to help conversion of tar.zip files to the tar.gz format. To extract zip files with several members, use unzip instead of
gzcat is identical to gunzip -c. (On some systems, zcat may be installed as gzcat to preserve the original link to compress.) gzcat
uncompresses either a list of files on the command line or its standard input and writes the uncompressed data on standard output. gzcat
will uncompress files that have the correct magic number whether they have a .gz suffix or not.
Gzip uses the Lempel-Ziv algorithm used in zip and PKZIP. The amount of compression obtained depends on the size of the input and the dis-
tribution of common substrings. Typically, text such as source code or English is reduced by 60-70%. Compression is generally much better
than that achieved by LZW (as used in compress), Huffman coding (as used in pack), or adaptive Huffman coding (compact).
Compression is always performed, even if the compressed file is slightly larger than the original. The worst case expansion is a few bytes
for the gzip file header, plus 5 bytes every 32K block, or an expansion ratio of 0.015% for large files. Note that the actual number of
used disk blocks almost never increases. gzip preserves the mode, ownership and timestamps of files when compressing or decompressing.
Ascii text mode: convert end-of-lines using local conventions. This option is supported only on some non-Unix systems. For MSDOS, CR
LF is converted to LF when compressing, and LF is converted to CR LF when decompressing.
-c --stdout --to-stdout
Write output on standard output; keep original files unchanged. If there are several input files, the output consists of a sequence
of independently compressed members. To obtain better compression, concatenate all input files before compressing them.
-d --decompress --uncompress
Force compression or decompression even if the file has multiple links or the corresponding file already exists, or if the com-
pressed data is read from or written to a terminal. If the input data is not in a format recognized by gzip, and if the option
--stdout is also given, copy the input data without change to the standard ouput: let gzcat behave as cat. If -f is not given, and
when not running in the background, gzip prompts to verify whether an existing file should be overwritten.
Display a help screen and quit.
For each compressed file, list the following fields:
compressed size: size of the compressed file
uncompressed size: size of the uncompressed file
ratio: compression ratio (0.0% if unknown)
uncompressed_name: name of the uncompressed file
The uncompressed size is given as -1 for files not in gzip format, such as compressed .Z files. To get the uncompressed size for
such a file, you can use:
gzcat file.Z | wc -c
In combination with the --verbose option, the following fields are also displayed:
method: compression method
crc: the 32-bit CRC of the uncompressed data
date & time: time stamp for the uncompressed file
The compression methods currently supported are deflate, compress, lzh (SCO compress -H) and pack. The crc is given as ffffffff for
a file not in gzip format.
With --name, the uncompressed name, date and time are those stored within the compress file if present.
With --verbose, the size totals and compression ratio for all files is also displayed, unless some sizes are unknown. With --quiet,
the title and totals lines are not displayed.
Display the gzip license and quit.
When compressing, do not save the original file name and time stamp by default. (The original name is always saved if the name had
to be truncated.) When decompressing, do not restore the original file name if present (remove only the gzip suffix from the com-
pressed file name) and do not restore the original time stamp if present (copy it from the compressed file). This option is the
default when decompressing.
When compressing, always save the original file name and time stamp; this is the default. When decompressing, restore the original
file name and time stamp if present. This option is useful on systems which have a limit on file name length or when the time stamp
has been lost after a file transfer.
Suppress all warnings.
Travel the directory structure recursively. If any of the file names specified on the command line are directories, gzip will
descend into the directory and compress all the files it finds there (or decompress them in the case of gunzip ).
-S .suf --suffix .suf
Use suffix .suf instead of .gz. Any suffix can be given, but suffixes other than .z and .gz should be avoided to avoid confusion
when files are transferred to other systems. A null suffix forces gunzip to try decompression on all given files regardless of
suffix, as in:
gunzip -S "" * (*.* for MSDOS)
Previous versions of gzip used the .z suffix. This was changed to avoid a conflict with pack(1).
Test. Check the compressed file integrity.
Verbose. Display the name and percentage reduction for each file compressed or decompressed.
Version. Display the version number and compilation options then quit.
-# --fast --best
Regulate the speed of compression using the specified digit #, where -1 or --fast indicates the fastest compression method (less
compression) and -9 or --best indicates the slowest compression method (best compression). The default compression level is -6
(that is, biased towards high compression at expense of speed).
Multiple compressed files can be concatenated. In this case, gunzip will extract all members at once. For example:
gzip -c file1 > foo.gz
gzip -c file2 >> foo.gz
gunzip -c foo
is equivalent to
cat file1 file2
In case of damage to one member of a .gz file, other members can still be recovered (if the damaged member is removed). However, you can
get better compression by compressing all members at once:
cat file1 file2 | gzip > foo.gz
compresses better than
gzip -c file1 file2 > foo.gz
If you want to recompress concatenated files to get better compression, do:
gzip -cd old.gz | gzip > new.gz
If a compressed file consists of several members, the uncompressed size and CRC reported by the --list option applies to the last member
only. If you need the uncompressed size for all members, you can use:
gzip -cd file.gz | wc -c
If you wish to create a single archive file with multiple members so that members can later be extracted independently, use an archiver
such as tar or zip. GNU tar supports the -z option to invoke gzip transparently. gzip is designed as a complement to tar, not as a replace-
The environment variable GZIP can hold a set of default options for gzip. These options are interpreted first and can be overwritten by
explicit command line parameters. For example:
for sh: GZIP="-8v --name"; export GZIP
for csh: setenv GZIP "-8v --name"
for MSDOS: set GZIP=-8v --name
On Vax/VMS, the name of the environment variable is GZIP_OPT, to avoid a conflict with the symbol set for invocation of the program.
gznew(1), gzcmp(1), gzmore(1), gzforce(1), gzexe(1), zip(1), unzip(1), compress(1), pack(1)
The gzip file format is specified in P. Deutsch, GZIP file format specification version 4.3, <ftp://ftp.isi.edu/in-notes/rfc1952.txt>,
Internet RFC 1952 (May 1996). The zip deflation format is specified in P. Deutsch, DEFLATE Compressed Data Format Specification version
1.3, <ftp://ftp.isi.edu/in-notes/rfc1951.txt>, Internet RFC 1951 (May 1996).
Exit status is normally 0; if an error occurs, exit status is 1. If a warning occurs, exit status is 2.
Usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
Invalid options were specified on the command line.
file: not in gzip format
The file specified to gunzip has not been compressed.
file: Corrupt input. Use gzcat to recover some data.
The compressed file has been damaged. The data up to the point of failure can be recovered using
gzcat file > recover
file: compressed with xx bits, can only handle yy bits
File was compressed (using LZW) by a program that could deal with more bits than the decompress code on this machine. Recompress
the file with gzip, which compresses better and uses less memory.
file: already has .gz suffix -- no change
The file is assumed to be already compressed. Rename the file and try again.
file already exists; do you wish to overwrite (y or n)?
Respond "y" if you want the output file to be replaced; "n" if not.
gunzip: corrupt input
A SIGSEGV violation was detected which usually means that the input file has been corrupted.
Percentage of the input saved by compression. (Relevant only for -v and -l.)
-- not a regular file or directory: ignored
When the input file is not a regular file or directory, (e.g. a symbolic link, socket, FIFO, device file), it is left unaltered.
-- has xx other links: unchanged
The input file has links; it is left unchanged. See ln(1) for more information. Use the -f flag to force compression of multiply-
Copyright (C) 1998, 1999, 2001 Free Software Foundation, Inc.
Copyright (C) 1992, 1993 Jean-loup Gailly
Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are
preserved on all copies.
Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified
versions, except that this permission notice may be stated in a translation approved by the Foundation.
When writing compressed data to a tape, it is generally necessary to pad the output with zeroes up to a block boundary. When the data is
read and the whole block is passed to gunzip for decompression, gunzip detects that there is extra trailing garbage after the compressed
data and emits a warning by default. You have to use the --quiet option to suppress the warning. This option can be set in the GZIP envi-
ronment variable as in:
for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0
In the above example, gzip is invoked implicitly by the -z option of GNU tar. Make sure that the same block size (-b option of tar) is used
for reading and writing compressed data on tapes. (This example assumes you are using the GNU version of tar.)
The gzip format represents the input size modulo 2^32, so the --list option reports incorrect uncompressed sizes and compression ratios for
uncompressed files 4 GB and larger. To work around this problem, you can use the following command to discover a large uncompressed file's
gzcat file.gz | wc -c
The --list option reports sizes as -1 and crc as ffffffff if the compressed file is on a non seekable media.
In some rare cases, the --best option gives worse compression than compressed file is mn a non seekable media. the default compression
level (-6). On some highly redundant files, compress compresses better than gzip.
See attributes(5) for descriptions of the following attributes:
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|Availability | SUNWgzip |
|Interface Stability | External |
Source for gzip is available in the SUNWgzipS package.