Login or Register to Ask a Question and Join Our Community


Linux

Urgent - serial port

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Linux Urgent - serial port
# 1  
Old 08-04-2008
Urgent - serial port
Hi All,
I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working.
I am sure the hardware is fine.

when I give command

dmesg | grep tty

I get,
serial 8250:ttyS0 at I/O 0x3f8 (irq=4)is a 16550A
serial 8250:ttyS1 at I/O 0x2f8 (irq=3)is a 16550A
serial 8250:ttyS2 at I/O 0x3e8 (irq=4)is a 16550A
serial 8250:ttyS3 at I/O 0x2e8 (irq=3)is a 16550A
0:05:ttyS0 at I/O 0x3f8 (irq=4) is a 16550A
0:06:ttyS1 at I/O 0x2f8 (irq=3) is a 16550A
0:09:ttyS3 at I/O 0x2e8 (irq=11) is a 16550A

I also tried setserial -g /dev/ttyS2 but getting the same result

My Qustion is:
1) what is the difference b/w first 4 lines and last three lines and Y is port 3(ttyS2) not getting displayed in b/w last three lines.
2) Is there something I have to do to enable port 3.
2)Please help me out to get the port 3 into working condition


Thanks in advance
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies

2. Web Development

Writing to a Serial Port

I am trying to write to a serial port and capture the reponse in a file - adduser ethan dialout The user `ethan' is already a member of `dialout' root@meow:/home/ethan# ls -l /dev/ttyS0 crw-rw-r-- 1 ethan dialout 4, 64 Oct 7 20:55 /dev/ttyS0 $fh1 = fopen("/dev/ttyS0", "w+");... (74 Replies)
Discussion started by: Meow613
74 Replies

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies

4. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies

5. UNIX for Dummies Questions & Answers

Missing serial port

A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing: # dmesg | grep tty console enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ... (2 Replies)
Discussion started by: dotancohen
2 Replies

6. Programming

Programming serial port

Hello! Can someone advice me which method I will use if I want to communicate with device via RS232 serial port with this requirements: 1. Serial port is opened in non-canonical mode. 2. All the time I need to check is there something to read. 3. If I have to write something I need to write it... (6 Replies)
Discussion started by: jvrlic
6 Replies

7. Solaris

Serial port not found

Hi, I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output-- According to this,serial port is not found.can anyone please tell me how to configure the... (1 Reply)
Discussion started by: smartgupta
1 Replies

8. Programming

Serial port programming

I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than... (2 Replies)
Discussion started by: raj8109
2 Replies

9. Linux

urgent......Serial port

I think my serial port(on board) is not working ...... because when I am running same code on two machines its working good....but when my system comes into picture ....it doesnt show any output comming from serial port.......... can anybody tell me how to configure my serial port.........or to... (16 Replies)
Discussion started by: arunchaudhary19
16 Replies

10. UNIX for Dummies Questions & Answers

Serial port communication

We're running SCO Unix Openserver 5.05 and I'm having trouble with serial communication between the com2 serial port and a handheld device. Downloading data from Unix to the handheld works perfectly, but the other way around creates a major problem. I don't know whether it's a buffer overflow or... (1 Reply)
Discussion started by: Aretha
1 Replies
Login or Register to Ask a Question

LEARN ABOUT OSF1

dc

dc(7)							 Miscellaneous Information Manual						     dc(7)

NAME

       dc - serial line/mouse/keyboard

SYNOPSIS

       controller   dc0   at ibus0   slot 0   vector dcintr

DESCRIPTION

       The  dc	serial	line controller provides DECstation 2100, DECstation 3100, DECstation 5000, and DECstation 5100 computer systems with key-
       board, mouse, and serial communications interfaces. The serial communications interfaces on the DECstation 2100 and DECstation 3100 provide
       partial	modem  control.  The  serial communications interfaces on the DECstation 5000 provide full modem control.  The device special file
       /dev/tty01 on a DECstation 5100 provides full modem control, while the remaining ports provide no modem control at all.	All serial  commu-
       nications interfaces operate at baud rates from B50 to B9600, excluding B200.

       The  dc	ports  are  used as follows: Usage Graphics device keyboard at 4800 BPS Mouse or tablet at 4800 BPS Communications port 1 (w/modem
       control)/local terminal Communications port 2 (w/modem control)/local terminal

       On all systems except the DECstation 5100, serial port 2 is used for the system console port in server (that is,  non-graphics)	configura-
       tions.  On DECstation 5100s, the serial port labeled 3 on the back of the system is always the system console port.  The serial system con-
       sole port always operates at 9600 BPS, 8-bits, no parity; modem control is not supported.

RESTRICTIONS

       Data communications equipment attached to the console serial port in server configurations must be set to 9600 BPS, 8-bits, no parity.  The
       scc driver enforces this restriction.

FILES

       console terminal local terminal local terminal local terminal (DECstation 5100 only)

RELATED INFORMATION

       console(7), devio(7), tty(7), MAKEDEV(8) delim off

																	     dc(7)