I have a SLES10 machine which until recently had only one disk. Now there is a second disk which I would like to mirror my OS installation to. I have three partitions, first one for /boot (~100M), the second one for / (~1G) and then the rest as a LVM partition with several volumes under that.
Does anyone have a guideline on how to proceed in doing this?
Probably somewhere one the line of partitioning the second disk using Linux Raid partitions, creating md-devices and so on. Any ideas?
Hi,
I am looking for a shell script which serves the below purpose.
Please find below the algorithm for the same and any help on this would be highly appreciated.
1)set of strings need to be replaced among set of files(directory may contain different types of files)
2)It should search for... (10 Replies)
Hi,
I have a Solaris (SunOS 5.10) installed, by default with the en_AU.UTF-8 locale. I want to change it to en_US.UTF-8
With AU, I have no issues whatsoever, so I installed the language package and now locale -a shows "en_US.UTF-8".
Problem is even with LC_ALL set in etc/default/init, the... (2 Replies)
I've been testing mirroring root partitions for the past few days within a virtual environment and on an old ML350. However, the live system that this is practice for has two disks, and they're non-identical.
I've done a bit of searching through the forum and see that a lot of people recommend... (2 Replies)
Hello, I need to write a program which sets server's ip address, router, network mask. Program also should set if it is an internal or external ip. Maybe someone can help me ? Any information from u is very useful :b:
I stopped at .. :(
#!/bin/sh
A=`hostname -i`
echo "server ip address is $A"... (4 Replies)
Hello All,
I am trying to mirror two non-root hard drives using zfs. But "fmthard" fails when I try to copy the vtoc due to disk mismatch. Please help me.
--- iostat command shows the disk to be similiar
--- format command shows disk to be different :confused:
--- c1t2d0 is the active... (8 Replies)
Hi, need some guidance, maybe I don't understand the term 3 or 4 way mirror.
I have 4 disks. All of same capacity. Need to 3-way mirror the disks for the OS using SVM (4 Replies)
hello everybody,
I have a system in Solaris 8 with SDS 4.2.1
I need to mirror the system disk which has the following characteristics :
* /dev/rdsk/c0t0d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 133 sectors/track
* 27 tracks/cylinder
* 3591 sectors/cylinder... (3 Replies)
volrootmir(8) System Manager's Manual volrootmir(8)NAME
volrootmir - Mirror areas necessary for booting to a new disk
SYNOPSIS
/usr/sbin/volrootmir [-a] [nconfig=count] target_disk [swap=target_partition]
OPTIONS
Specifies that all volumes on the system disk be mirrored, not just the root and swap volumes, rootvol and swapvol.
DESCRIPTION
The volrootmir script causes a mirror copy of areas of the root disk involved in booting to be made on the specified target disk.
When used without the -a option, volrootmir adds mirrors of the root and swap volumes and allocates them on the new disk. In addition, all
disk regions required for booting are set up and partitions for the new volume mirrors are created.
When used with the -a option, volrootmir mirrors all in-use partitions on the system disk.
To mirror a swap volume that is on a separate disk from the root volume, the swap attribute must be used to specify a separate target for
the swap mirror.
The target disk(s) must be at least as large as the sum of the sizes of rootvol and swapvol. Also, the physical disk should not have any
disk partition in use.
This script can be called from the voldiskadm menus by choosing the Mirror volumes on a disk operation.
ATTRIBUTES
Specifies the number of log copies and copies of the configuration database, for example, nconfig=2. Specifies that the swap volume,
swapvol, be mirrored on a separate disk, as specified by target_partition.
EXAMPLES
The following command mirrors the rootvol and swapvol volumes onto the target disk, dsk3. This command will fail if swapvol is on a differ-
ent disk from rootvol.
# volrootmir dsk3 The following command mirrors rootvol, swapvol, and any other volumes on the root disk onto the target disk, dsk3.
This command will fail if swapvol is on a different disk from rootvol.
# volrootmir -a dsk3 The following command mirrors rootvol on disk dsk3, swapvol onto partition dsk7d, and any other volumes on the
root disk onto disk dsk3. This command will fail if swapvol is on the same disk as rootvol.
# volrootmir -a dsk3 swap=dsk7d The following command mirrors rootvol onto disk dsk3 and swapvol onto partition dsk7d. This command
will fail if swapvol is on the same disk as rootvol.
# volrootmir dsk3 swap=dsk7d
SEE ALSO volintro(8), voldiskadm(8)volrootmir(8)
