Connect from USB to serial port of switch


 
Thread Tools Search this Thread
Operating Systems Linux Connect from USB to serial port of switch
# 8  
Old 05-10-2018
So how about using an ethernet to serial adapter to gain access to the switch serial management port remotely? See attached.

Obviously I would recommend that you fully test the solution locally on an identical switch if you have one, before shipping to the remote site for somebody to simply plug in.

I've successfully used such devices to access serial ports of remote RAID controllers using nothing more than an IP address from PuTTy.

Just an idea. There are, of course, a variety of ethernet to serial adapters out there. Just search for them.
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. AIX

Connect GPS to serial port AIX 5.x

HI, Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server. Thanks in advance !!! (8 Replies)
Discussion started by: trevian3969
8 Replies

2. Solaris

Solaris 11.2 does not assign serial port to 3g usb modem?

In ubuntu etopic i create this udev rules for prolink 3g usb modem: SUBSYSTEM=="block", SUBSYSTEM=="scsi", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="f000", ACTION=="add", RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000" After plugging the usb modem, ubuntu assigns the ports... (4 Replies)
Discussion started by: shamsat
4 Replies

3. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies

5. AIX

How to connect PC's USB port to pSeries system?

Hello AIX Group Members, I have two systems: (1) IBM pSeries 640, 7026-B80. (2) A 5-month old HP laptop with Windows Vista. It has no serial port and only has USB ports on it. My question are: How can I use the laptop as the p640's terminal? How can I make the connection? What type of cable... (4 Replies)
Discussion started by: aixlover
4 Replies

6. Solaris

USB to Serial Adapter connection

Hi Community, I'm working on Sun Server V490 with my PC (with OS Vista). I'm using a USB to Serial Adapter to connect to Server directly. I've this problem, I'm connecting to Server with Putty client with this settings: boud rate 9600, 8 bit, 0 parity, 0 flow control, but after to have typed... (4 Replies)
Discussion started by: Sunb3
4 Replies

7. UNIX for Dummies Questions & Answers

USB serial help needed

Hi iam new bie to unix. we are getting the sensor positional values on hyperterminal(UART).but our task is to use this data for mouse movement.so wat we hav to do ?? is this required to change usb driver cud u send info regarding my query?? Thanks in advance :) :) :) (1 Reply)
Discussion started by: jayakar
1 Replies

8. SCO

Usb To Serial (sco6)

According to sco6 usb supplement, once you install it, you can install a bafo industries (BF-810) in the computer. I have done all that and followed the intructions completely and it shows up using usbprobe and l /dev/usb_ser* Problem is that when I go to mkdev serial, it is not there. Anyone... (1 Reply)
Discussion started by: jn5519
1 Replies

9. Linux

modem - usb to serial configuration

I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0 I am using the device /dev/ttyUSB0 When I issue the command "mgetty ttyUSB0" I get the following output in the log file. How do I get the system to see the modem. 12/02 14:17:55... (2 Replies)
Discussion started by: jshoovie
2 Replies
Login or Register to Ask a Question
mdc(4)							     Kernel Interfaces Manual							    mdc(4)

Name
       mdc - DS5100 serial line driver

Syntax
       device	 mdc0	  at ibus?     vector mdcintr
       device	 mdc1	  at ibus?     vector mdcintr
       device	 mdc2	  at ibus?     vector mdcintr

Description
       A  DS5100 base system (mdc0) provides four asynchronous ports.  An optional asynchronous card (mdc1 and mdc2 ) can be added to supply eight
       additional ports.

       The mdc ports are used as follows:

       Port    Usage			  Connector

       0       Console port		  6-pin MMJ on CPU board
       1       Local terminal		  6-pin MMJ on CPU board
       2       Full modem control port	  25-pin D-Sub on CPU board
       3       Local terminal		  6-pin MMJ on CPU board

       An optional asynchronous board provides an additional eight lines:

       4       Local terminal		  6-pin MMJ
       5       Local terminal		  6-pin MMJ
       6       Full modem control port	  25-pin D-Sub
       7       Local terminal		  6-pin MMJ
       8       Local terminal		  6-pin MMJ
       9       Local terminal		  6-pin MMJ
       10      Local terminal		  6-pin MMJ
       11      Local terminal		  6-pin MMJ

       The console baud rate is set to 9600 baud by default.  You can change this by setting the baud environment variable  from  console  prompt.
       Each  communication  port  from	the  serial  line controller behaves as described in the reference page and can be set to run at any of 16
       speeds.	For the encoding, see

       You can establish the state of port 2 (port 6) by specifying either modem or nomodem as part of the file entry.

Restrictions
       The speed default is to 9600 baud on the console port.  The console device must be set for 8-bit character length with one stop bit and	no
       parity. The driver enforces these restrictions; that is, changing speeds with the command may not always work on console ports.

Files
       Console terminal

       Full modem control or local terminal

See Also
       console(4), devio(4), tty(4), ttys(5), MAKEDEV(8)

								       RISC								    mdc(4)