Something is, though. That's what "promiscuous mode" means, it will receive packets to any destination. Things like wireshark and tcpdump use it to monitor the connection.
What programs / services are you running? You need to find what is putting it into that mode. Whatever it is, is what I suspect is messing up your connection.
Hello all,
Info:
System RedHat 7.5
I need to create a script that based on the creation time,
if the file is older then 5 minutes then execute some stuff, if not exit.
I thought to get the creation time and minutes like this.
CreationTime=$(stat -c %y /tmp/test.log | awk -F" " '{ print... (3 Replies)
Hi all,
System Ubuntu 16.04.3 LTS
i have the following log
INFO 2019-02-07 15:13:31,099 module.py:700] default: "POST /join/8550614e-3e94-4fa5-9ab2-135eefa69c1b HTTP/1.0" 500 2042
INFO 2019-02-07 15:13:31,569 module.py:700] default: "POST /join/6cb9c452-dcb1-45f3-bcca-e33f5d450105... (15 Replies)
Hi, please help with below time conversion to minutes.
one column values:
2 minutes 16 seconds 420 msec
43 seconds 750 msec
0 days 3 hours 29 minutes 58 seconds 480 msec
11 seconds 150 msec
I need output in minutes(total elapsed time in minutes) (2 Replies)
I have a RHEL 5 system with a bonded interface configure using only one network port (eth0). So I have config file for ifcfg-bond0 and ifcfg-eth. I'd like to configure eth5 to be the second SLAVE in the bond. My question is, after I modify ifcfg-eth5, can I add eth5 to the bond0 interface without... (1 Reply)
This is my situation
DOS pc serial cable (sl0) Linux Pc eth1
192.168.0.10 <-------------------->192.168.0.2 <------------>192.168.0.1 (router)
I connected the linux pc and the dos pc with a SLIP (serial line internet protocol), so they can communicate in the sl0 interface.
... (3 Replies)
Hi all
I have installed a demo version of SCO OpenServer 5.0.2, I finally found it is Desktop Interface, I would like to know how to change its interface to dos based interface?
If you have any ideas, please tell me then. Thank you (2 Replies)
Dear all,
I am a newbie in solaris and I need your advice.
I have a Solaris version 5.9 installed on Sunfire V240.
I am able to ssh the machine from putty remotely.
My problem is that I cannot see the display from KVM switch I have connected to it. I need also to be able to see the GUI... (2 Replies)
I have to check for a directory content: every time it is filled with a file, I have to launch a bash script.
So: how to do an ls every 5 minutes (avoiding cron), telling the script to start if the file has appeared in the dir?
Have you got better ideas?
Thanks in advance! (5 Replies)