I had installed suse linux 11.2 . I had some strange problem with my network , after configuring it showing some error like tulip_stop_rxtx() failed . The server is not reachable from outside.
Could some one help me with it. (1 Reply)
Hi,
I was reading this article
Multi-Processing Modules (MPMs) - Apache HTTP Server
Once the server has been compiled, it is possible to determine which MPM was chosen by using ./httpd -l. This command will list every module that is compiled into the server, including the MPM.
... (0 Replies)
Good morning,
Server:HP ProLiant DL165 G7 diskless with Disc on Storage
OS:SLES11 SP1 and xen-3.3.1_18546_12-3.1
iSCSI:INTEL Gigabit ET Dual Port Server Adapter 825768
When I start SLES11 with Xen in boot-loader menu, then the boot will stop because linux could'nt find the iscsi interface... (0 Replies)
Hello,
After a replacement of the motherboard of my server, all disks belonging to a raid6 are now marked as spare.
Is there any way to mark those disks as active and restore the raid6?
$ cat /proc/mdstat
Personalities :
md1 : inactive sda1(S) sdk1(S) sdj1(S) sdi1(S) sdh1(S)... (0 Replies)
Hello, i want to know the basics to configure prefork.c module
to high Apache performance and i think it's depends on the server hardware details (RAM and Processors)
Thanks :) (0 Replies)
hello solaris friends,
I've tried installing Sun Solaris 10.0, but everytime it seems to bypass the network config. screen that looks similar to this...here's the url:
http://www.hup.hu/old/images/hup/Solaris/Sol10beta7/9.png
I'm able to install it all the way through but I get no... (2 Replies)
A2ENCONF(8) System Manager's Manual A2ENCONF(8)NAME
a2enconf, a2disconf - enable or disable an apache2 configuration file
SYNOPSIS
a2enconf [ [-q|--quiet] configuration]
a2disconf [ [-q|--quiet] configuration]
DESCRIPTION
This manual page documents briefly the a2enconf and a2disconf commands.
a2enconf is a script that enables the specified configuration file within the apache2 configuration. It does this by creating symlinks
within /etc/apache2/conf-enabled. Likewise, a2disconf disables a specific configuration part by removing those symlinks. It is not an
error to enable a configuration which is already enabled, or to disable one which is already disabled.
Note that many configuration file may have a dependency to specific modules. Unlike module dependencies, these are not resolved automati-
cally. Configuration fragments stored in the conf-available directory are considered non-essential or being installed and manged by reverse
dependencies (e.g. web scripts).
OPTIONS -q, --quiet
Don't show informative messages.
-m, --maintmode
Enables the maintainer mode, that is the program invocation is effectuated automatically by a maintainer script. This switch should
not be used by end users.
-p, --purge
When disabling a module, purge all traces of the module in the internal state data base.
EXIT STATUS
a2enconf and a2disconf exit with status 0 if all configurations are processed successfully, 1 if errors occur, 2 if an invalid option was
used.
EXAMPLES
a2enconf security
a2disconf charset
Enables Apache security directives stored in the security configuration files, and disables the charset configuration.
FILES
/etc/apache2/conf-available
Directory with files giving information on available configuration files.
/etc/apache2/conf-enabled
Directory with links to the files in conf-available for enabled configuration files.
SEE ALSO apache2ctl(8), a2enmod(8), a2dismod(8).
AUTHOR
This manual page was written by Arno Toell <debian@toell.net> for the Debian GNU/Linux distribution, as it is a Debian-specific script with
the package.
14 February 2012 A2ENCONF(8)