9 More Discussions You Might Find Interesting
1. Red Hat
Dear Expert,
I 've installed Redhat linux AS3, My machine having Inbuild network card (Intel(R) 82566DM-2 Gigabit Network Connection).
I've downloaded e1000e-2.3.2 from Intel site, but its not working for my machine. I'm unable to configure the Network.
ifconfig eth0 xx.xx.xx.xx netmask... (0 Replies)
Discussion started by: Mohammed Faiz
0 Replies
2. Solaris
Hi, Boss
i have a problem about open the Graphic remote. when i used the Xmanager2.0 connect to the Sun Fire880 with Sun solaris 2.8 software. prompt to following information:
XDMCP connection failed: retry?
so can some body told me how the check the XDMCP protocol was enable...and the port 177... (9 Replies)
Discussion started by: surainbow
9 Replies
3. Red Hat
Hi,
After a reboot, One of My Proliant Machine DL380 could not load the O/S.
Raid 1+0 was configured.
Some Gathered Facts:
During Boot from System Rescue, the following message appears
"You don't have any linux partitions.Press return to get a shell. The system will reboot... (1 Reply)
Discussion started by: Muhammad Ahmad
1 Replies
4. Programming
In attachment, is the code to test IP by ARP proxy. I always use it to test a IP already existing in my cluster.
Usage:
arp_func eth0 192.168.1.1
Enviroment:
IA64, RedHat AS3.0, 2.4.21-15.EL, gcc-3.2.3-34,
"gcc -o arp_func arp_func.c"
When the code below added before... (0 Replies)
Discussion started by: lameryang
0 Replies
5. UNIX for Dummies Questions & Answers
Hello all,
Does anyone know or have configure their system to allow no password during an XDMCP session. I' m running Redhat whit gdm manager.
Thanks! (0 Replies)
Discussion started by: larryase
0 Replies
6. HP-UX
hi everybody,
can anyone please tell me what are things for verify to have an xdmcp connexion ton HPUX 10.20 host
best regards (0 Replies)
Discussion started by: hmaiida
0 Replies
7. HP-UX
Anybody know how to set up xdmcp on HPUX (11.0 +)?
Thanks. (1 Reply)
Discussion started by: lyonsd
1 Replies
8. UNIX for Dummies Questions & Answers
Does anyone know how to setup processor affinity on Redhat AS3.0. I know how to do this on Solaris and Windows..
Thanks (2 Replies)
Discussion started by: sssow
2 Replies
9. UNIX for Dummies Questions & Answers
Hello all,
I would like to change the options on the root menu when I use the middle button on a three mouse buttom setting. I can append to the menu but, I seem to be unable to find the lisp code for pop-root-menu. Does anyone know how to change this? THANKS ALL (3 Replies)
Discussion started by: larry
3 Replies
gdmXnestchooser(1) User Commands gdmXnestchooser(1)
NAME
gdmXnestchooser, gdmXnest - run an XDMCP chooser
SYNOPSIS
gdmXnestchooser [--background] [--broadcast] [--direct] [--no-gdm-check] [--no-query] [--xnest-extra-options=options] [--xnest=string]
[gnome-std-options] hostname
DESCRIPTION
gdmXnestchooser automatically gets the correct display number, sets up access, and runs Xnest with -indirect localhost. This ensures that
you get an XDMCP chooser that is provided by your machine. You can also specify the hostname whose chooser should be displayed, so that
gdmXnestchooser somehost runs the XDMCP chooser from host somehost inside an Xnest.
gdmXnest is a symbolic link to gdmXnestchooser and is the same as running gdmXnestchooser with the --no-query and --no-gdm-check options.
gdmXnest is useful for running Xnest without actually connecting somewhere.
OPTIONS
The following options are supported:
--background Run in the background. You can also use -b to specify this option.
--broadcast Run broadcast instead of indirect (chooser). You can also use -B to specify this option.
--direct Do direct query instead of indirect (chooser). You can also use -d to specify this option.
--no-gdm-check Do not check for running GDM.
--no-query Just run Xnest, no query (no chooser). You can also use -n to specify this option.
--xnest-extra-opExtra=options for Xnest. The default is no options. You can also use -o to specify this option.
--xnest=string Xnest command line. The default value is Xnest. You can also use -x to specify this option.
gnome-std-optionStandard options available for use with most GNOME applications. See gnome-std-options(5) for more information.
OPERANDS
The following operands are supported:
hostname Hostname whose chooser should be displayed.
EXAMPLES
Example 1: Running the XDMCP Chooser From Host somehost Inside an Xnest
example% gdmXnestchooser somehost
Example 2: Connecting to somehost Directly Run
example% gdmXnestchooser -d somehost
FILES
The following files are used by this application:
/usr/bin/gdmXnestchooserExecutable to run an XDMCP chooser
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWgnome-display-mgr |
+-----------------------------+-----------------------------+
|Interface stability |External |
+-----------------------------+-----------------------------+
SEE ALSO
Latest version of the GNOME Desktop User Guide for your platform.
gdm(1), gdmflexiserver(1), gdmphotosetup(1), gdmsetup(1), gdmthemetester(1), gdm-restart(1m), gdmconfig(1m), gnome-std-options(5)
NOTES
Original man page written by Martin K. Petersen <mkp@mkp.net>, George Lebl <jirka@5z.com>. Copyright (c) 1998, 1999 by Martin K. Petersen.
Copyright (c) 2001, 2003, 2004 by George Lebl. Copyright (c) 2003 by Red Hat, Inc.
Updated by Brian Cameron, Sun Microsystems Inc., 2004.
SunOS 5.10 1 Sep 2004 gdmXnestchooser(1)