routing rules for dmz in debian router.

4 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Debian As A Router [Not Assigning IPs]

I've been trying to set up an old desktop as a wifi router. I've looked at a lot of information online, but mostly this: https://seravo.fi/2014/create-wireless-access-point-hostapd I've gotten where I can see the ssid from my phone and laptop. However, it starts to connect, but never receives...

2. IP Networking

Dual Router (routing problem)

This is the network configuration I have: +-------------------------------------------------+ +===========+ | | | | | INTERNET |---| LINUXBOX2 | ...

3. UNIX for Dummies Questions & Answers

Remote Unix printing to my WinXP works with no router. How can I make it work through my router?

I set up remote printing on a clients Unix server to my Windows XP USB printer. My USB printer is connected directly to my PC (no print server and no network input on printer). With my Win XP PC connected to my cable modem (without the router), i can do lp -dhp842c /etc/hosts and it prints. I...

4. UNIX for Advanced & Expert Users

Firewall - 2 Internet accesses - routing rules from source

Hello, I would like to modify my firewall configuration for being able to handle 2 internet connections in my Red zone. I would then like to configure some selecting routing rules depending on the internal source. Actual configuration: ===================== 1 router A (ISP)...

LEARN ABOUT DEBIAN

atalkd.conf

ATALKD.CONF(5)							   Netatalk 2.2 						    ATALKD.CONF(5)

NAME

       atalkd.conf - Configuration file used by atalkd(8) to determine the interfaces used by the master Netatalk daemon

DESCRIPTION

       /etc/netatalk/atalkd.conf is the configuration file used by atalkd to configure the Appletalk interfaces and their behavior

       Any line not prefixed with # is interpreted. The configuration lines are composed like:

       Interface [ options ]

       The simplest case is to have either no atalkd.conf, or to have one that has no active lines. In this case, atalkd should auto-discover the
       local interfaces on the machine. Please note that you cannot split lines.

       The interface is the network interface that this to work over, such as eth0 for Linux, or le0 for Sun.

       The possible options and their meanings are:

       -addr net.node
	   Allows specification of the net and node numbers for this interface, specified in Appletalk numbering format (example: -addr 66.6).

       -dontroute
	   Disables Appletalk routing. It is the opposite of -router.

       -net first[-last]
	   Allows the available net to be set, optionally as a range.

       -noallmulti (linux only)
	   On linux the interfaces, atalkd uses, are set to ALLMULTI by default caused by countless NICs having problems without being forced into
	   this mode (some even don't work with allmulti set). In case, you've a NIC known to support multicasts properly, you might want to set
	   this option causing less packets to be processed

       -phase ( 1 | 2 )
	   Specifies the Appletalk phase that this interface is to use (either Phase 1 or Phase 2).

       -router
	   Like -seed, but allows single interface routing. It is the opposite of -dontroute.

       -seed
	   The seed option only works if you have multiple interfaces. It also causes all missing arguments to be automagically configured from
	   the network.

       -zone zonename
	   Specifies a specific zone that this interface should appear on (example: -zone "Parking Lot"). Please note that zones with spaces and
	   other special characters should be enclosed in parentheses.

SEE ALSO

       atalkd(8)

Netatalk 2.2							 22 September 2000						    ATALKD.CONF(5)

Linux