unix and linux commands - unix shell scripting

Shouting at hard disks

9 More Discussions You Might Find Interesting

1. AIX

How to reclaim hard disks and IP's in AIX?

Hello I recently received a request to reclaim hard disks and IP addresses within an AIX system(s). THe file systems are no longer in use and the client has indicated that it is OK to remove them and reclaim the disks and release the IP's. Now, since the file systems belong to a Volume group I...

2. Solaris

Determining number of hard disks in the system

Hello to all, what is the command in Solaris/Unix which I can use to determine how many hard disks exist in the system? I have tried with different command such as df -lk and similar but cannot know for sure how many actual disks are installed. Commands like # fdisk -l | grep Disk and #...

3. Shell Programming and Scripting

How to get number of attached hard disks in HP-UX

how do i get the number of attached hard disks in HP-UX

4. Solaris

Hard/Transfer errors in disks

Could you please explain us what are these transport/hard errors... when i ran the following command, iostat -E | grep Errors i got the following: sd240 Soft Errors: 37 Hard Errors: 1144 Transport Errors: 0 sd578 Soft Errors: 0 Hard Errors: 890 Transport Errors: 0 Please...

5. AIX

Mount points to hard disks

Hi I am oracle DBA and sometimes need to see on which disks oracle data files are residing . How can we check that . The file system is jfs on aix 5.2.0.0 The method is use is to use mount |grep oracle_dir_name or lsfs mount_point_name command to see what /dev/logical_volume_name is mounted...

6. Solaris

Get onyl local hard disks

How can I get only the local hard disks in Solaris? I've tried iostat -x, iostat -E, etc, but it shows the cdroms, dvds, external storage... I want only the local physical hard disks. Thanks.

7. Solaris

Hard disks in solaris

I need to insert a new hard disk into a Sun Fire v210 machine. The (only) internal disk which is already in the machine is part number XRA-SC1CB-73G10K (DISK DRIVE ASSY. 73GB, 10K RPM, with SPUD BRACKET). I also have nearly endless access to IBM hard disks at extremely low prices and would there...

8. UNIX for Advanced & Expert Users

Solaris GRUB troubled with dual hard disks

I have the following system: - DELL Dimension 8300 - Pentium IV @ 2.66GHz - BIOS Revision A07 - 1.5GB RAM - 2 Hard Disks (Master 120GB, Slave 80GB), I guess it's IDE I had WinXP on the master disk (hd0) and recently installed Solaris 10 1/06 on the slave disk (hd1). The NTLDR is in MBR...

9. Filesystems, Disks and Memory

External Lacie USB hard disks

I'm trying to mount a USB Lacie external hardrive in my Linux system but am having trouble doing so, I'm also having trouble mounting my USB ZIP 250 drive. It is totally me being stupid, but I'm new to unix and am having a few teathing problems. the command I'm using is the following mount...

LEARN ABOUT OSF1

volreattach

volreattach(8)						      System Manager's Manual						    volreattach(8)

NAME

       volreattach - Reattaches disk drives that have once again become accessible

SYNOPSIS

       /usr/sbin/volreattach [-rb] [accessname...]

       /usr/sbin/volreattach -c  accessname

OPTIONS

       The  volreattach  utility  has the following options: Calls the volrecover utility to attempt to recover stale plexes of any volumes on the
       failed disk.  Performs the reattach operation in the background.  Checks whether a reattach is possible. No operation is performed, but the
       name of the disk group and disk media name at which the disk can be reattached is displayed.

DESCRIPTION

       The volreattach utility attempts to reattach disks using the same disk group and media names they had before detachment.

       This  operation	may  be  necessary  if a disk has a transient failure, or if some disk drivers are unloaded or unloadable when the Logical
       Storage Manager is started, causing disks to enter the failed state.

       If the problem is fixed, the volreattach command can be used to reattach the disks without plexes being flagged as stale, as  long  as  the
       reattach happens before any volumes on the disk are started.

       The volreattach command is called from the voldiskadm menus as part of disk recovery.

       The  volreattach  utility tries to find a disk with a disk group and disk ID matching that of the disk(s) being reattached. If the matching
       disk is found, the reattach operation may still fail if the original cause (or some other cause) for the disk failure still exists.

EXIT CODES

       A zero exit status is returned if it is possible to perform a reattach.	Otherwise, non-zero is returned.

SEE ALSO

       volintro(8), voldiskadm(8), volrecover(8)

																    volreattach(8)