SNMP in a Bridge device

8 More Discussions You Might Find Interesting

1. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

2. UNIX for Dummies Questions & Answers

Need to transfer all kernel logs (var/log/messages) to the snmp listener as snmp trap

i am working with embedded system -Dell DCS management sub system. my question is as below: currently we are using linux kernel 2.6.30 build and we have a kernel logs stored to the /var/log/messages path. now we have to transfer all this logs to the specified SNMP target as a part of SNMP...

3. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

4. Infrastructure Monitoring

SNMP traps to SNMP server

Dear Champs, I am new to unix, and need to configure linux server to send below traps to a SNMP server. Monitoring TRAP Disk Space Low Monitoring TRAP Memory Low Monitoring TRAP CPU high Monitoring TRAP Admin login/Logoff Please help me how to send this information to my SNMP server...

5. IP Networking

SNMP Problem - SNMP not getting to the agent.

I am having a problem with an SNMP event, and I am not sure where I should be looking to solve this problem. Description: There is an SNMP event in our system that for one reason or another is not getting sent out as an email because it is never getting to our SNMP agent. I see where the...

6. Red Hat

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

Hi , Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide.

7. IP Networking

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

8. UNIX for Dummies Questions & Answers

bridge on linux

Hello. I expirince some problems with bridging, i'm pretty new to that technology I've 2 nic's 1 - wireless rt2500 ra0 canyon cn511 card 2 - e100 intel, ifconfig ra0 up && iwconfig ra0 essid xxx channel x mode managed bring me wireless connection up then i do following: brctl addbr br0...

LEARN ABOUT OSX

cups-snmp.conf

snmp.conf(5)							    Apple Inc.							      snmp.conf(5)

NAME

       snmp.conf - snmp configuration file for cups

DESCRIPTION

       The  snmp.conf file configures how the standard CUPS network backends (http, https, ipp, ipps, lpd, snmp, and socket) access printer infor-
       mation using SNMPv1 and is normally located in the /etc/cups directory. Each line in the file can be a  configuration  directive,  a  blank
       line, or a comment. Comment lines start with the # character.

       The Community and DebugLevel directives are used by all backends. The remainder apply only to the SNMP backend (cups-snmp(8)).

DIRECTIVES

       The following directives are understood by the CUPS network backends. Consult the on-line help for detailed descriptions:

       Address @IF(name)

       Address @LOCAL

       Address address
	    Sends SNMP broadcast queries to the specified address(es). There is no default for the broadcast address.

       Community name
	    Specifies the community name to use. Only a single community name may be specified. The default community name is "public".

       DebugLevel number
	    Specifies  the  logging  level  from  0 (none) to 3 (everything). Typically only used for debugging (thus the name). The default debug
	    level is 0.

       DeviceURI "regular expression" device-uri [... device-uri]
	    Specifies one or more device URIs that should be used for a given make and model string. The regular expression is used to	match  the
	    detected  make  and  model,  and  the  device  URI	strings must be of the form "scheme://%s[:port]/[path]", where "%s" represents the
	    detected address or hostname. There are no default device URI matching rules.

       HostNameLookups on

       HostNameLookups off
	    Specifies whether the addresses of printers should be converted to hostnames or left as numeric IP addresses. The default is "off".

       MaxRunTime seconds
	    Specifies the maximum number of seconds that the SNMP backend will scan the network for printers. The default is 120 seconds  (2  min-
	    utes).

SEE ALSO

       cups-snmp(8),
       http://localhost:631/help

COPYRIGHT

       Copyright 2007-2013 by Apple Inc.

23 April 2012							       CUPS							      snmp.conf(5)

IP Networking