I have a server I would like to disable 802.3x flow control on. The host is Linux (CentOS 4.4 x86_64 w/ 2.6.9-42.0.3.EL kernel,) and I'm using the ns83820 driver for the ethernet interface in question.
I've tried looking at the driver parameters (modinfo ns83820) and using ethtool (ethtool -a eth0,) but neither exposes / supports any configurability for pause frames.
In my desperation, I've even resorted to fiddling with the driver source to flip it off, but don't understand enough c to make sure I'm not breaking something else in the process. In the kernel source at drivers/net/ns83820.c, I find the following snippet:
I *think* I can just get rid of PCR_PAUSE_CNT without breaking something else (for example, I see MCAST in there, and I definitely want to retain multicast support.)
Hi,
We observe below logs from switch - the database servers rebooted becaause they couldn't do I/O on vfiler -Any pointers looking at below logs please?
Switch logs:
2016 Apr 30 07:41:16.729 EAG-ECOM-POD111GPU-SWF1 %ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface Ethernet152/1/8 is down (Link... (0 Replies)
In my bash script I want to say "if argument 2 is anything except x, y or z, than echo this" (x y and z being words).
So my script looks like this:
if ]
then
echo "unrecognized input: $2"
fi
This usually works but than I also want to say "if argument 2 IS x, y, or z, but argument 4 is... (4 Replies)
I am wiping off the dust to my shell scipting days and had this question: I have this script that I have created, and cannot figure out where my flow control issue is within this script.
#!/bin/ksh
#Basic script to backup server
#Home directories to the external ... (2 Replies)
hi ,
I am new to scripting, i have a doubt can any one pls solve it for me
the code is not working
set users = (user1 user2 user3)
echo The users are
echo $users
echo Enter the USER NAME
set USER_NAME = $<
set i = 1;
for ( i = 1; i <= $#users; i++ )
if ( $USER_NAME == $users )... (1 Reply)
Hi guys.I'm just beginner of python.
I'm just trying to do some analysis on simple input file.
it has 6 columns and i want to consider k,l and m,n if i and j are +
after that checking which value is greater or lower in k,l and m,n
I have included logic header just to explain what I was... (4 Replies)
My question is such:
I want to control the bandwidth of my users and cap there speed on the network. I was told by a Cisco rep that it is better to police or control the bandwidth at the switch and not via the router. It that the correct place to control bandwidth at the switch or would it be... (0 Replies)
I am using informix RDBMS over SUSE LINUX. In linux if you press control-c it acts as an interrupt key. In my program I have used control-c to perform certain functions but it is being overriden by interrupt function of control-c key combination of SUSE LINUX. Kindly suggest me a solution by which... (1 Reply)
hello im facing a queer problem when i execute the foll code in unix
# include <stdio.h>
# include <unistd.h>
main(int argc,char *argv)
{
FILE *fp = fopen("/ras/chirag/fifotest/file.fifo","a");
int i=1;
fprintf(fp,argv);
printf("I SLEEP");
system("date");
for (i=0;i<50;i++)... (2 Replies)
how can i create a script with a correct control flow/loop(?) to
provide output from 3 files?
file1
one
two
three
file2
yellow
red
orange
file3
banana
apples
cantaloupes
output file:
one (1 Reply)
scc(7) Miscellaneous Information Manual scc(7)NAME
scc - Serial keyboard/mouse/communications interface
SYNOPSIS
controller scc0 at tc0 slot 3 vector sccintr
DESCRIPTION
Two base board Zilog scc dual UARTS provide DEC 3000 series personal systems with keyboard, mouse, and serial communications interfaces.
The serial communications interfaces can operate at baud rates from B50 to B57600 (see tty(7)).
The driver for the scc interface supports hardware flow control using the Request to Send (RTS) and Clear to Send (CTS) signals. When
hardware flow control is enabled, the flow of input data is controlled by the RTS signal and the flow of output data is controlled by the
CTS signal. If the CTS signal is off, the driver will suspend output to that line until the CTS lead is reasserted. Likewise, the driver
will turn off the RTS lead to tell the device connected to the line to stop sending data as a result of congestion on the host side. When
the condition clears, the driver will turn on the RTS lead to tell the device to resume sending data.
In alternate console configurations (that is, no graphics head), communications port 2 (/dev/tty01) becomes the system console. The serial
system console port always operates at 9600 BPS, 8-bits, no parity. No modem or hardware flow control is supported.
RESTRICTIONS
Data communications equipment attached to the console serial port in alternate console configurations must be set to 9600 BPS, 8-bits, no
parity. The scc driver enforces this restriction.
Only communications port 1 (/dev/tty00) includes full modem control.
FILES
console terminal local terminal local terminal
RELATED INFORMATION console(7), devio(7), modem(7), tty(7), MAKEDEV(8) delim off
scc(7)