10.10.200.0 via 10.10.201.1
10.10.202.0 via 10.10.201.1
10.10.101.0 via 10.10.201.1
port forwarding:
incoming SSH connections forwarded to 10.10.201.1
# ROUTER2 (asus rtac3200) #
routing table:
10.10.200.0 via 10.10.202.1
10.10.201.0 via 10.10.202.1
10.10.100.0 via 10.10.202.1
port forwarding:
incoming SSH connections forwarded to 10.10.202.1
# LINUXBOX1 #
############
### Results ###
############
If I enable "static routing (part 2)" I can ssh into LINUXBOX1 from LINUXBOX2 via either router but any ping coming from VPN1 or LOCALNET to 10.10.202.1 does not get answered.
If I disable "static routing (part 2)" I cannot ssh into LINUXBOX1 from LINUXBOX2 via ROUTER2 but any ping coming from VPN1, VPN2 or LOCALNET to 10.10.202.1 does get answered.
First, thank you. You've taken the time to document your network, show your problems, and describe your goal quite clearly.
I'm not sure you can forward ssh in that fashion, it has many checks to prevent this kind of diversion since that can be done for insidious purposes as well as benign ones.
I would like to see the output of route -n from the linux boxes and routers.
Hi everyone,
I am experiencing discontinuity of Internet service, this started 1 month ago. Everything worked very well for 1 year of intensive use, but now, I have problems reaching my gateway.
The gateway is not my router but a node belonging to my ISP and I share the same public IP with... (3 Replies)
Hi,
I have two physical interfaces on a servers.
We have connected them to differerent subnets.
1) First interface:
10.158.49.87 to newtwork 10.158.49.0, its gateway is 10.158.49.1
(It is added as default gateway)
It is existing set up. It works well
2) Second interface:
... (1 Reply)
I need the following solution , please help me...
Current situation
ip: 192.168.0.12 persistent and 192.168.254.12 service ip
gateway: 192.168.0.254
subnet: 255.255.255.0
i have added a new ip on a new nic
ip: 10.10.255.40
gateway: 10.10.255.62
subnet: 255.255.255.224
... (1 Reply)
I have a Slackware box that I've set up as a router for my home network. It does that and zoneminder and that's pretty much it. It's worked fine for a few years doing this until today.
Today the power went out and the UPS could only keep this machine up for about 45 mins before it ran out of... (1 Reply)
Hi to all.
There are eth0(wan) eth1(lan) and eth3(dmz) in my debian router.
In dmz is planing dns, ad, dhcp, smtp/pop/imap, https(web-based imap client). I don't configured rules on "iptables" and "route" loads for right relation lan clients with dmz services.
Please explain me example... (0 Replies)
Hello all,
I recently bought D-link (DI-524) router and I have following problem. I setup the network and its running smoothly no problem.. but there is a minor problem that I need to solve. Users can access each other documents etc. but they cannot access each other trough web browser using IP... (1 Reply)
I have a question concerning networking. Could any forum
members explain to me why I might be getting "no route
to host" messages when I try to connect through ftp and
http protocols?
I have went to my etc/hosts file and everything seems to be
configured properly. I can connect within my... (1 Reply)
following Problem.
I configured my SuSE Linux 8.0 as a router. I4l, named, ip_forward, iptables (NAT/MASQUERADING) are running or are aktivatet.
I just can get a internet connection about the proxy server squid, but if i want to use other protocols i need functional routing.
(I had this... (1 Reply)
Hi
I know this problem is more likely some windows problem but it has also something to do with unix.
We have a windows nt environment wich uses AIX (unix) machines as file servers (samba). In our windows network environment we nicely see al the unix file servers via the 10 MB network. Last... (2 Replies)