Login or Register to Ask a Question and Join Our Community


IP Networking

Kermit- dialup and network connection

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Special Forums IP Networking Kermit- dialup and network connection
# 1  
Old 03-09-2006
Lightbulb Kermit- dialup and network connection
hi all,
Using kermit, i made serial dialup connetion between two PCs through telephone line and transfered files trough this line. The code appears as like this,

set modem type generic #Setting the modem type.
set modem data-compression on #Data compression on to speed up transfer.
set line /dev/ttyS0 #Modem is connected to COM1 which is in /dev/ttyS0.
set flow rts/cts #Setting the flow control to rts/cts.
take /usr/local/App/Out/ #opening file
set dial method tone #Tone dialing.
set dial ignore-dialtone on #Don't wait for dial tone (only for D-Link modems).
clear device-and-input #Clearing the device buffers.
set file collision discard #If the same file is received again, discard it.

And now I need to change this code for network connection. (As the telephone line connection is to be replaced with MAN)
Is it possible to migrate code from dialup to network connection?
Can I use socket programming for achieve this?
Is there any other protocol to transfer a file through leased line in linux platform?

Expecting a detailed favourable reply,
Thanks & rgds,
PC Saji
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Solaris

Solaris Network Connection

Hi, Recently we faced awkward situation where we cannot connect to Oracle DB that hosted in Solaris server intermittently and it timeout eventually. The server seems fine. We can putty to server like normal but when try do prstat, it takes time and come out Please Wait.. for a while. When we go... (1 Reply)
Discussion started by: tharmendran
1 Replies

2. Solaris

network connection failing

hi, I'm setting up a home lab and I am having problems keeping my connection open on putty. every time i leave it for about 10 seconds and come back I keep having to re-connect. I'm more of a AIX person and trying to get more fimilar with Sun but some of the commands I am trying to run to diag... (2 Replies)
Discussion started by: vpundit
2 Replies

3. Ubuntu

establishing connection with e-kermit running on LINUX from my operating system

we designed a primitive operating system for learning basics fundamentals and we created process switching, interrupt/polled IO for device drivers like UART and printers. We accomplish this by using our own tools called SPEDE (for downloading compiled elf image from host ubuntu system that have... (0 Replies)
Discussion started by: bicepjai
0 Replies

4. Linux

Network connection

Hi, I installed linux Fedora on a virtual machine, but the network connection is not working. All firewalls are off. Any ideas what is the problem? I am using WiFi. Thanks in advance! Regards, Atanas (2 Replies)
Discussion started by: apenkov
2 Replies

5. Solaris

Why network connection is down?

Hello colleague, Development department is deploying some applications on solaris machine but hence all connection goes down. Our all network connection files are correct but we can't connect with our gw. Only we can ping localhost and assigned ip address. I don't want to reboot for... (4 Replies)
Discussion started by: getrue
4 Replies

6. Ubuntu

network connection on ubuntu

Hi, I am using ubuntu 8.x. I am not not able connect to internet through broadband. i'm also using windows xp, there i don't have any problems. Please tell me how access the internet on ubuntu 8.x through broadband. Thanks, Achhayya:) (4 Replies)
Discussion started by: achhayya
4 Replies

7. UNIX for Dummies Questions & Answers

unable to browse internet in linux (railwire dialup connection)

Hi Gurus, Good morning . I have a railwire internet connection(dial up).I am able to access internet in windows xp .but in windows xp every time i restart my pc i have to manually right click the "railwire"icon and then click "connect, after this i am just getting connected to the internet. But... (4 Replies)
Discussion started by: sanjay.login
4 Replies

8. Slackware

activating network connection in linux

Hi all, I've just installed redhat linux 7.3 and everything is good so far except my network connection. When I use the wizard to activate it gives me an error 'cannot activate' but no reason. Using the wizard I can see the device Eth0 and under the hardware tab it seems to recognize the card... (13 Replies)
Discussion started by: Mace
13 Replies

9. IP Networking

new office - no network connection!

We have just moved offices and in the same week recieved a SUN box from another company site. I'm attemting to connect this SUN box to the network, but i can't see it on the network. I have modified the /etc/host file with the IP i want to attribute to the box, rebooted, but still nothing.... (1 Reply)
Discussion started by: colesy
1 Replies
Login or Register to Ask a Question

LEARN ABOUT MINIX

ttytab

TTYTAB()																  TTYTAB()

NAME

       ttytab - table of login terminals

SYNOPSIS

       /etc/ttytab

DESCRIPTION

       The ttytab file lists all the terminal devices that one can login on.  It is a simple text file that contains lines of the form:

	      name type "getty"   "init"

       The  name and type fields are simple words, name is the name of the terminal device with /dev stripped off, and type tells the type of ter-
       minal to initialize the TERM environment variable.

       The getty and init fields may name commands that are run to allow one to login on the line, or to initialize the line.  Both  these  fields
       may be more than one word if the whole field is enclosed in double quotes.  Getty is usually simply the word getty, the command that prints
       a system identification banner and allows on to type a name to log in.  Init is usually an stty command to set the baud rate and parity	of
       a serial line.

       The  init  field  may  be omitted to indicate that no initialization is necessary, and the getty field may be left out to not start a login
       process.  Terminals should not be left out, because their place in the ttytab file determines their slot number as returned by ttyslot(3).

       Comments (introduced by #) and empty lines are ignored.

EXAMPLE

       A ttytab for the console, two serial lines, and a pseudo tty entry:

	      console	  minix       getty
	      tty00	  vt100       getty	  "stty 9600"
	      tty01	  dialup      getty	  "stty 38400"
	      ttyp0	  network

ENVIRONMENT

       TERM	      Terminal type

NOTES

       It is customary to set the type to dialup for a dialin line.  One can check for that name in one's .profile.

SEE ALSO

       gettyent(3), ttyslot(3), init(8).

AUTHOR

       Kees J. Bot (kjb@cs.vu.nl)

																	  TTYTAB()