Routing problem : two interfaces one gateway

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Inconsistency between RedHat 6.5 global gateway and single gateway leads to loss of default gateway

Dear friends I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different....

2. IP Networking

Network Interfaces Problem - Monitoring equipment

Dear gurus of Linux / Unix. I have a server, which I use to monitoring traffic, the problem that I find is when I run the following command: probe:~ # sar -n DEV 1 I see that I one second appear info in some interface and in the other second no appear, I don't know what will be the...

3. AIX

Problem with multiple network interfaces

Hi .. we have two AIX 5.3 systems with a small client server app communicating over a TCP socket. Box A has a single network interface where the server app (in Java) opens a well known port and waits for connections from Box B. Box B has two network interfaces, X and Y. Interface X has the...

4. Solaris

Routing problem

Hi, I have two physical interfaces on a servers. We have connected them to differerent subnets. 1) First interface: 10.158.49.87 to newtwork 10.158.49.0, its gateway is 10.158.49.1 (It is added as default gateway) It is existing set up. It works well 2) Second interface: ...

5. IP Networking

Problem when I Open my WireShark - No Interfaces Option available

Hi gurus of unix, I haved installed my openSolaris in a HP530, Recently I use the following command beadm destry opensolaris1 beadm destry opensolaris2 After That I reboot my Laptop. Well when I go to my work I try to open my wireshark tool, but the option in GUI interface does not appear!!!...

6. Debian

/etc/network/interfaces problem

Hello i am configuring a debian lenny sever ,/etc/network/interfaces is modified so that eth1 takes a static IP address then i save it wq! then i restart the networking , /etc/init.d/networking restart . but after reboot ,the file is reset ,note that the interfaces had by defauklt IPv6 address...

7. Linux

GNUGK-How to setup static gateway to gateway routing

Dear Sir I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper. I am having a problem, configuring static call routing on GNUGK in the section ...

8. Linux

Routing via several interfaces for hosted virtual machines

My setup consists of a hardware node, which hosts several virtual machines (OpenVZ, to be precise). The hardware node has two network interfaces (<ifA>, <ifB>) connected to different subnets (<networkA>, <networkB>). I want to route the traffic of certain VEs over <ifB> while routing the other VEs...

9. SCO

Network interfaces problem

Hi, I have problems with my SCO unix network interfaces. Intel integrated adapter was failing, so I installed new one - 3COM adapter into free PCI slot. Installed driver using SCO Software manager - successfully Added new Network adapter using SCO Network configuration manager - successfully...

10. IP Networking

Network interfaces problem

LEARN ABOUT ULTRIX

dc

dc(4) Kernel Interfaces Manual dc(4)

Name
dc - serial line/mouse/keyboard

Syntax
device dc0 at ibus? vector dcintr

Description
The serial line controller provides four ports, with modem control on two of the ports. The DECstation 3100 and DECstation 2100 only pro-
vide partial modem control. The DECstation 5000 provides full modem control. The ports are used as follows:

Port Usage
0 Graphics device keyboard at 4800 BPS
1 Mouse or tablet at 4800 BPS
2 Communications port 1 (w/modem control)/local terminal
3 Communications port 2 (w/modem control)/local terminal

Each communication port from the serial line controller behaves as described in and can be set to run at any of 16 speeds. For the encod-
ing, see

When a graphics device is not being used as the system console, communications port 2 becomes the system console. In this configuration,
the port can only be used at 9600 BPS and no modem control is supported.

The serial line driver operates in interrupt-per-character mode (all pending characters are flushed from the silo on each interrupt).

Restrictions
Speed must be set to 9600 BPS on the console port and 4800 BPS on ports used by graphics devices. The serial line driver enforces this
restriction; that is, changing speeds with the command may not always work on these ports.

Files
console terminal

local terminal

See Also
console(4), devio(4), tty(4), ttys(5), MAKEDEV(8)

RISC dc(4)

IP Networking