Routing problem : two interfaces one gateway

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Inconsistency between RedHat 6.5 global gateway and single gateway leads to loss of default gateway

Dear friends I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different....

2. IP Networking

Network Interfaces Problem - Monitoring equipment

Dear gurus of Linux / Unix. I have a server, which I use to monitoring traffic, the problem that I find is when I run the following command: probe:~ # sar -n DEV 1 I see that I one second appear info in some interface and in the other second no appear, I don't know what will be the...

3. AIX

Problem with multiple network interfaces

Hi .. we have two AIX 5.3 systems with a small client server app communicating over a TCP socket. Box A has a single network interface where the server app (in Java) opens a well known port and waits for connections from Box B. Box B has two network interfaces, X and Y. Interface X has the...

4. Solaris

Routing problem

Hi, I have two physical interfaces on a servers. We have connected them to differerent subnets. 1) First interface: 10.158.49.87 to newtwork 10.158.49.0, its gateway is 10.158.49.1 (It is added as default gateway) It is existing set up. It works well 2) Second interface: ...

5. IP Networking

Problem when I Open my WireShark - No Interfaces Option available

Hi gurus of unix, I haved installed my openSolaris in a HP530, Recently I use the following command beadm destry opensolaris1 beadm destry opensolaris2 After That I reboot my Laptop. Well when I go to my work I try to open my wireshark tool, but the option in GUI interface does not appear!!!...

6. Debian

/etc/network/interfaces problem

Hello i am configuring a debian lenny sever ,/etc/network/interfaces is modified so that eth1 takes a static IP address then i save it wq! then i restart the networking , /etc/init.d/networking restart . but after reboot ,the file is reset ,note that the interfaces had by defauklt IPv6 address...

7. Linux

GNUGK-How to setup static gateway to gateway routing

Dear Sir I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper. I am having a problem, configuring static call routing on GNUGK in the section ...

8. Linux

Routing via several interfaces for hosted virtual machines

My setup consists of a hardware node, which hosts several virtual machines (OpenVZ, to be precise). The hardware node has two network interfaces (<ifA>, <ifB>) connected to different subnets (<networkA>, <networkB>). I want to route the traffic of certain VEs over <ifB> while routing the other VEs...

9. SCO

Network interfaces problem

Hi, I have problems with my SCO unix network interfaces. Intel integrated adapter was failing, so I installed new one - 3COM adapter into free PCI slot. Installed driver using SCO Software manager - successfully Added new Network adapter using SCO Network configuration manager - successfully...

10. IP Networking

Network interfaces problem

LEARN ABOUT OSF1

dc

dc(7)							 Miscellaneous Information Manual						     dc(7)

NAME

       dc - serial line/mouse/keyboard

SYNOPSIS

       controller   dc0   at ibus0   slot 0   vector dcintr

DESCRIPTION

       The  dc	serial	line controller provides DECstation 2100, DECstation 3100, DECstation 5000, and DECstation 5100 computer systems with key-
       board, mouse, and serial communications interfaces. The serial communications interfaces on the DECstation 2100 and DECstation 3100 provide
       partial	modem  control.  The  serial communications interfaces on the DECstation 5000 provide full modem control.  The device special file
       /dev/tty01 on a DECstation 5100 provides full modem control, while the remaining ports provide no modem control at all.	All serial  commu-
       nications interfaces operate at baud rates from B50 to B9600, excluding B200.

       The  dc	ports  are  used as follows: Usage Graphics device keyboard at 4800 BPS Mouse or tablet at 4800 BPS Communications port 1 (w/modem
       control)/local terminal Communications port 2 (w/modem control)/local terminal

       On all systems except the DECstation 5100, serial port 2 is used for the system console port in server (that is,  non-graphics)	configura-
       tions.  On DECstation 5100s, the serial port labeled 3 on the back of the system is always the system console port.  The serial system con-
       sole port always operates at 9600 BPS, 8-bits, no parity; modem control is not supported.

RESTRICTIONS

       Data communications equipment attached to the console serial port in server configurations must be set to 9600 BPS, 8-bits, no parity.  The
       scc driver enforces this restriction.

FILES

       console terminal local terminal local terminal local terminal (DECstation 5100 only)

RELATED INFORMATION

       console(7), devio(7), tty(7), MAKEDEV(8) delim off

																	     dc(7)

IP Networking