Hi,I want connect my ASA 5510 firewall to a 3750 switch with RIP routing. Unfortunately,I am having issues passing the VPN subnet through rip to the 3750.I don't understand how the routing table is populated on the ASA. Any suggestions?
Hi all,
I need this as soon as possible to solve it or at least to find out what is the problem.
I have configured IPSec tunnels with Openswan and Cisco ASA, i have established a connection and the ping was fine, but after some time there is request time out from both sites. I don't have ASA... (0 Replies)
Hi,
I am trying to establish vpn between my linux server and cisco asa at client side.
I installed openswan on my cent os.
Linux Server
eth0 - 182.2.29.10
Gateway - 182.2.29.1
eth1 - 192.9.200.75
I have simple IPtables Like
WAN="eth0"
LAN="eth1" (0 Replies)
I was given my pcf file to login to work from home and wanted to use OpenVPN instead of the Cisco VPN client software. Can I use this pcf file with OpenVPN? I attempted to use vpnc:
http://wiki.centos.org/HowTos/vpnc
but it just times out
?? (2 Replies)
Hi Gurus of UNIX, I have a problem when I try to install a software VPN Cisco in Laptop (HP530).
I do the following procedures:
Part 2 - VPN Client Compilation
We will now set up the vpn client. As there is no official Cisco VPN Client for OpenSolaris X86 available, we will use vpnc.... (1 Reply)
Hi all, This will save me a tremendous amount of time if i can get this script working. I have alot of sites i need to connect to using cisco vpn and then ssh onto servers to retrieve some info. Its all repetitative and it needs scripted.
what i have done so far is put this into a script.
... (0 Replies)
Who in the 64 ubuntu adopted cisco vpn client on the wireless network
I downloaded the cisco vpn client for linux but run vpn_install make file when an error in cisco with the help of the document read in half a day, nor do I know this vpn client in the 64 systems in use.
Who can help me, a... (1 Reply)
rtquery(1M) System Administration Commands rtquery(1M)NAME
rtquery - query routing daemons for their routing tables
SYNOPSIS
rtquery [-np1] [-w timeout] [-r addr] [-a secret] host...
rtquery [-t operation] host...
DESCRIPTION
The rtquery command is used to query a RIP network routing daemon, in.routed(1M) or GateD, for its routing table by sending a request or
poll command. The routing information in any routing response packets returned is displayed numerically and symbolically.
By default, rtquery uses the request command. When the -p option is specified, rtquery uses the poll command, an undocumented extension to
the RIP protocol supported by GateD. When querying GateD, the poll command is preferred over the request command because the response is
not subject to Split Horizon and/or Poisoned Reverse, and because some versions of GateD do not answer the request command. in.routed does
not answer the poll command, but recognizes requests coming from rtquery and so answers completely.
The rtquery command is also used to turn tracing on or off in in.routed.
OPTIONS
The following options are supported:
-a passwd=XXX Causes the query to be sent with the indicated cleartext or MD5 password.
-a md5_passwd=XXX|KeyID
-n Displays only the numeric network and host addresses instead of both numeric and symbolic names.
-p Uses the poll command to request full routing information from GateD. This is an undocumented extension RIP proto-
col supported only by GateD.
-r addr Asks about the route to destination addr.
-t operation Changes tracing, where operation is one of the actions listed below. Requests from processes not running with UID 0
or on distant networks are generally ignored by the daemon except for a message in the system log. GateD is likely
to ignore these debugging requests.
on=tracefile
Turns tracing on, directing tracing into the specified file. That file must have been specified when the daemon
was started or have the name, /var/log/in.routed.trace.
more
Increases the debugging level.
off
Turns off tracing.
dump
Dumps the daemon's routing table to the current trace file.
-w timeout Changes the delay for an answer from each host. By default, each host is given 15 seconds to respond.
-1 Queries using RIP version 1 instead of RIP version 2.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWroute |
+-----------------------------+-----------------------------+
SEE ALSO in.routed(1M), route(1M), gateways(4), attributes(5), icmp(7P), inet(7P), udp(7P)
Routing Information Protocol, RIPv1, RFC 1058
Routing Information Protocol, RIPv2, RFC 2453, STD 0056
SunOS 5.10 24 Apr 2002 rtquery(1M)