Login or Register to Ask a Question and Join Our Community


IP Networking

How to stack Cisco 2960-S and Cisco 2960X?

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Special Forums IP Networking How to stack Cisco 2960-S and Cisco 2960X?
# 1  
Old 07-29-2014
How to stack Cisco 2960-S and Cisco 2960X?
Is there an easy way to stack Cisco 2960-S and Cisco 2960X switches? If you have no idea, follow this:

1. Stacking is not supported on switches running the LAN Lite image. All switches in the stack must be running the LAN Base image.
2. In a mixed stack of Catalyst 2960-X and Catalyst 2960-S switches, the number of supported stack members is reduced from eight to four.
3. In a mixed stack of Catalyst 2960-X and Catalyst 2960-S switches, full stack bandwidth is reduced from 80 Gbps to 40 Gbps.
4. In a mixed stack of Catalyst 2960-X and Catalyst 2960-S switches, stack convergence time is increased from milliseconds to 1 to 2 seconds.
Login or Register to Ask a Question

Previous Thread | Next Thread

1 More Discussions You Might Find Interesting

1. Red Hat

Lost RedHat....Cisco in need!

Hey, Im a high school student in Cisco, Im in CCNA 3 right now and we are starting our Linux stuff, but our instructor can't seem find a good FREE RedHat 9 ISO, could anyone help out with this and send us some links. :) Thanx a lot. (4 Replies)
Discussion started by: Tabryan07
4 Replies
Login or Register to Ask a Question

LEARN ABOUT DEBIAN

flow-gen

flow-gen(1)						      General Commands Manual						       flow-gen(1)

NAME

       flow-gen -- Generate test flows

SYNOPSIS

       flow-gen [-h]  [-b big|little]  [-d debug_level]  [-n count]  [-V version]  [-z z_level]

DESCRIPTION

       The flow-gen utility generates a test pattern of flows in any of the currently supported export versions typically for debugging purposes.

OPTIONS

       -b big|little
		 Byte order of output.

       -d debug_level
		 Enable debugging.

       -h	 Display help.

       -n count  Generate count flows.	Default 1000.

       -V version
		 Generate version type exports.  Supported versions are:

	   1	NetFlow version 1 (No sequence numbers, AS, or mask)
	   5	NetFlow version 5
	   6	NetFlow version 6 (5+ Encapsulation size)
	   7	NetFlow version 7 (Catalyst switches)
	   8.1	NetFlow AS Aggregation
	   8.2	NetFlow Proto Port Aggregation
	   8.3	NetFlow Source Prefix Aggregation
	   8.4	NetFlow Destination Prefix Aggregation
	   8.5	NetFlow Prefix Aggregation
	   8.6	NetFlow Destination (Catalyst switches)
	   8.7	NetFlow Source Destination (Catalyst switches)
	   8.8	NetFlow Full Flow (Catalyst switches)
	   8.9	NetFlow ToS AS Aggregation
	   8.10 NetFlow ToS Proto Port Aggregation
	   8.11 NetFlow ToS Source Prefix Aggregation
	   8.12 NetFlow ToS Destination Prefix Aggregation
	   8.13 NetFlow ToS Prefix Aggregation
	   8.14 NetFlow ToS Prefix Port Aggregation
	   1005 Flow-Tools tagged version 5

       -z z_level
		 Configure compression level to  z_level.  0 is disabled (no compression), 9 is highest compression.

EXAMPLES

       Generate a test pattern of 1000 version 5 flows and send them in the Cisco NetFlow packet format to 10.0.0.1 port 9500.

	 flow-gen -V5 | flow-send 0/10.0.0.1/9500

BUGS

       The test pattern may change between releases.

AUTHOR

       Mark Fullmer maf@splintered.net

SEE ALSO

       flow-tools(1)

																       flow-gen(1)