The machine on the left is a windows machine running a DHCP server,
The server has two address pool 88 & 99.
The central machine is a linux machine having two network cards,
eth1 belongs to subnetwork 192.168.99.0/24
eth2 belongs to subnetwork 192.168.88.0/24
the linux machine serves as a router and also as a DHCP relay.
eth1 which is connected directly to the DHCP server broadcast its DHCP DISCOVERY directly to the server which allocating an IP address from the 99 pool.
my problem is regarding eth2,
I want to allocate its IP address dynamically from the 88 pool locate at the DHCP server.
is there a known way to do so ?
im using the dhclient command.
Thanks.
Last edited by DukeNuke2; 06-25-2013 at 05:42 AM..
Reason: Fix setup display
Hey guys,
I run my raspberry pi with a TP-Link Wlan-USB stick. The stick works out of the box with the pi-modded debian.
But eventhough the automatic connection to one of the saved WLAN-networks in the file /etc/wpa_supplicant/wpa_supplicant.conf works, my PI doesn't request or receive an... (4 Replies)
Hi All,
Could you please explain the purpose of assigning the static IP by using the DHCP Concept. Like by using the clients MAC address we assign the static IP Address. Waiting for your reply. Thanks in Advance. (6 Replies)
Where can you find your DHCP Server address? I checked all of the files that this mentioned with no luck.
Quick HOWTO : Ch08 : Configuring the DHCP Server - Linux Home Networking (6 Replies)
we can assign a dynamic and fixed ip address for a dhcp_client through dhcp server ,
if it is dynamic ip address , it would be having lease time and renews after half of the leasetime gets over.
would the same funda applies for fixed ip address to .. i dont think so ... please confirm on the... (3 Replies)
Hi ,
when i configure my server with a fixed ip address in dhcpd.conf as below
subnet 172.21.151.0 netmask 255.255.255.0 {
range 172.21.151.66 172.21.151.66;
}
host switch {
hardware ethernet 00:05:30:02:DB:31;
fixed-address 172.21.151.66;
}
when i start dhcpd server , it... (2 Replies)
Hi.
I want to use the DHCP server that comes with vxWorks 6.4.
The DHCP server implementation has a table that contains addresses of DHCP servers that will receive a copy of all the client requests that the local server gets, thus the server acts as a dhcp relay at the same time.
Can anyone... (4 Replies)
Hello Experts,
I am working on a software that has network client-server architecture. I need to have a mechanism that notifies me upon change of dhcp address change locally or at remote machine. Windows have IP Helper APIs to get address change notification. Is there something similar in Unix?... (3 Replies)
hi
I need a dhcp congfigured to give some of my clients IP regarding their MAC addresses and rest should get any IP from same pool. I am not sure what to add dhcpd.conf to provide such a pool or group or class. I tried with this but seems not good enough.
<<<<dhcpd.conf>>>>
... (2 Replies)
Hi all,
I have this problem that puzzles me, i have setup all the right DHCP configuration in Windows Server. The reservation IP address in windows for this specific unix terminal. However, when i rebooted the unix terminal the IP which was already assigned for this box somehow change to a total... (0 Replies)
Hi,
I have a script that my operators use as a login profile.
As they need to export their display in order to access the GUI of the data protector program in HPUX machine.
Anyone can advise how I can grep (eg. who -r) the dynamically assigned IP address and automatically put it as a variable... (4 Replies)
