Hi, The default gateway (172.17.220.1) cannot be pinged via the default interface bond0 (172.17.220.231), but can be pinged via interface eth1 (10.201.135.73).
Code:
# ping -I eth1 172.17.220.1
PING 172.17.220.1 (172.17.220.1) from 10.201.135.73 eth1: 56(84) bytes of data.
64 bytes from 172.17.220.1: icmp_seq=0 ttl=255 time=5.48 ms
64 bytes from 172.17.220.1: icmp_seq=1 ttl=255 time=0.523 ms
# ping -I bond0 172.17.220.1
PING 172.17.220.1 (172.17.220.1) from 172.17.220.231 bond0: 56(84) bytes of data.
From 172.17.220.231 icmp_seq=1 Destination Host Unreachable
From 172.17.220.231 icmp_seq=2 Destination Host Unreachable
Ping is supposed to work with the default interface bond0. Because the virtual interface bond0 can be pinged by systems in the same subnet, bond0 is working (right?). There must be a routing issue. Here is the interfaces info:
the interface needs to be configured. Is the bond up and running?
As you haven't shown any other interface configurations you should have this entry in one of them (i.e. /etc/sysconfig/network-scripts/ifcfg-eth0)
Code:
MASTER=bond0
SLAVE=yes
Last edited by Scott; 10-26-2012 at 10:21 AM..
Reason: Code tags
So, the 10. interface that can route is not pingable, and the 172. interface that cannot arp its gateway is pingable? Maybe we should get some traceroute's or something. The 10. might not ping because of routing setup, as 10. is only routable within an intranet. If the 172. pings from outside, it can obviously find a route, and we wonder what that is! Some tcpdump or whatever can tell us how far it gets on the lan. What does the arp cache look like for the 172. hosts? (ARP cache generally has a life of minutes.)
Hi,
Please help me on issue described below,
I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4.
M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop.
At M2, I have done following,... (1 Reply)
we are not able to ping client server (falcon-ebr.sbms.bsc.com) from netbackup master server (135.179.96.122 tsprd-ebr.edc.single.net)
However from client server we are able to ping the master Server.
Please assist on this (1 Reply)
hi guys
suse 11 SP1 x64
I have a server (4 NIC ports 192.168.100.100-103) that connects point to point to a storage device (same thing 4 ports 192.168.110.100-113) but this server connects to normal LAN 10.6.100.x - gateway 10.6.100.1
the issue is when testing connectivity to the storage... (7 Replies)
hello everyone!:)
I have an exercise which I think is difficult for beginner like me. Here is the exercise
Create a shell script, which takes a directory as command line argument.
Script displays ten first lines from every text file in that directory. After
displaying the lines from the... (1 Reply)
I have run into a wall troubleshooting a Centos 5 networking issue. Hoping someone can assist.
I've got a box with two vlans trunked over bond0
bond0 Link encap:Ethernet HWaddr 00:22:64:C1:D6:60
inet6 addr: fe80::222:64ff:fec1:d660/64 Scope:Link ... (0 Replies)
I have an IP routing issue or I am just to stupid to work it out myself.
I have setup am old PC running SUSE Linux 11.3 as a router, the system has 3 Interfaces connecting 3 networks.
Interface 1 = 10.164.2.161/21
Interface 2 = 192.168.1.210/24
Interface 3 = 30.1.0.11/16
The default... (6 Replies)
I have a string as "Period= 20090531 Client Name= Clayton Lumbar Company Destination= MD"
I want to parse the string and store it in 3 different variables.
$period (should get value 20090531)
$client (should get value "Clayton Lumbar company")
$dest (should get value MD)
How can I do... (3 Replies)
Hello,
I've moved to a new network with multiple AIX box's. Most of them are working fine and dandy.
On one box I need to set up a static route to a gateway.. no problem right?
Whenever I add the route it appears in the routing table as UGc and then begins adding new entries to the... (1 Reply)