How to show Cisco Router Running Configuration in Third Party Application

9 More Discussions You Might Find Interesting

1. IP Networking

Need help configuring Cisco 892-k9 router

I bought a Cisco 892-k9 router and I am having in issue trying to setup the initial configuration. Does someone have a sampl configuration for a single subnet that I can use for my configuration? Thanks.

2. Hardware

How to view Cisco WS-C2960S-24TD-L OutPut/Configuration?

Recently, I want to see how to get a hold of a report showing the output/ configuration on my Catalyst 2960S 24 GigE, 2 x 10G SFP+ LAN Base switch ( basically, a report stating if all ports are functioning or not). Any help would be greatly appreciated. Thank you! Cisco WS-C2960S-24TD-L Switch...

3. Shell Programming and Scripting

Expect script to show cisco configs

I know there are better ways to do this. I prefer snmp. I do not have the proper perl modules loaded on the platorm. Snmp isnt loaded on the platform. Telnet is not an option. I need to write an expect script to pull cisco equipment configs. The following code is executed once I gain...

4. IP Networking

cisco switch + firewall configuration upgrade

Hi experts, I need to cope configuration from one switch/firewall to another switch/firewall. I have copied running configs. The question is do I have to clear the existing configuration on the dest. devices Or can I copy it(replace) directly without clearing previous config ? If...

5. IP Networking

isc dhcpd and cisco router

Hello all, I have set up dhcpd on a linux box for serving subnets on multiple vlans configured on a Cisco 6500 with ip helper of the dhcp server. Servers get dhcp leases just fine, however, some machines lose their connection for reboot or what not and I can not get their lease back even though...

6. IP Networking

Setup Dial In VPN on Cisco Router

Hello, Does anyone know where I can find configuration information on setting up a dial in VPN on Cicso IOS for a bunch of servers. Could not seem to find anything in search engines. Thanks

7. IP Networking

Linux behind a cisco router

Dear All, I have worked with xDSL routers working in bridged mode, and linux behind them working as a Firewall utilizing IPTABLES. My question is, how this will change if the xDSL router is replaced with a Cisco Router? I mean to ask that, can I assign a public ip on the linux machine, which...

8. Shell Programming and Scripting

Perl telnet to cisco router and compare the ping ms

All Please help, i will telnet to router to obain the ping status and compare, if higher than normal latency, i will have further action.. if i do the telent and in perl script then .... e.g the result i obtain from the router will be =' Success rate is 100 percent (5/5), round-trip...

9. UNIX for Advanced & Expert Users

Cisco Router command to get hostname

Hi All, I am connected to a cisco router and I want to know the hostname of this router. I connect as telnet <IPADDRESS> and the prompt shows vpnaccess-bristol> But I want to know the full hostname of the router how can i do that. When i type the hostname command the following...

LEARN ABOUT DEBIAN

xorpsh

xorp(1) 						      General Commands Manual							   xorp(1)

NAME

       xorpsh -- XORP Command Shell

SYNOPSIS

       xorpsh [-c command]  [-t directory]  [-e]  [-h]	[-v]

DESCRIPTION

       This manual page documents briefly the xorpsh command.

       This manual page was written for the Debian distribution because the original program does not have a manual page.

       xorpsh  is  the command used to interact with a eXtensible Open Router Platform (XORP) router. This command starts up a command line inter-
       face (CLI), that allows the configuration of the router and monitoring of the router state.

       The xorpsh command provides an interactive command shell to a XORP user, similar in many ways to the role played by a  Unix  shell.   In  a
       production  router  xorpsh might be set up as an user's login shell - they would login to the router via ssh and be directly in the xorpsh.
       It can also be run directly from the Unix command line.

       xorpsh should normally be run as a regular user; it is neither necessary or desirable to run it as root.  If an user is to be permitted	to
       make changes to the running router configuration, that user needs to be in the Unix group xorp.

       The  Debian  package installation automatically sets up both a xorp user and a xorp group to which this user belongs. However, any user can
       run the xorpsh command unless locally restricted by the administrator.

OPTIONS

       xorpsh allows the following options:

       -h	 Show summary of options.

       -v	 Print verbose information.

       -c command
		 Specify command(s) to execute.

       -t directory
		 Specify templates directory.

       -e	 Exit immediately if cannot connect to the rtrmgr

SEE ALSO

       xorp_rtrmgr (8)

       This program is documented fully in the Xorp User Manual, chapter Command Structure, available at /usr/share/doc/xorp-doc/ in  Debian  sys-
       tems when the xorp-doc package is installed.

AUTHOR

       XORP is Copyright (c) 2001-2009 XORP, Inc.

       This  manual  page was written by Javier Fernandez-Sanguino jfs@debian.org for the Debian system (but may be used by others). For licensing
       details please see /usr/share/doc/xorp/copyright.

																	   xorp(1)

IP Networking