9 More Discussions You Might Find Interesting
1. IP Networking
Hi,I want connect my ASA 5510 firewall to a 3750 switch with RIP routing. Unfortunately,I am having issues passing the VPN subnet through rip to the 3750.I don't understand how the routing table is populated on the ASA. Any suggestions? (0 Replies)
Discussion started by: Ayaerlee
0 Replies
2. IP Networking
First of all, hello.
I have a problem installing a vpn server and client.
My server is a computer running windows 7, and windows, running a virtual machine running debian.
In the debian system, I've the vpn server installed (SoftEther VPN Server)
The problems come when I try to connect to... (1 Reply)
Discussion started by: Blues23
1 Replies
3. IP Networking
I'll try and be brief and detailed.
I have a Macbook Pro Retina running Mavericks. When on my network at the office (work) everything local works just fine. Local servers are resolved through our internal DNS settings. For example, we have a fileserver at "fs01". I can connect to it with... (1 Reply)
Discussion started by: jbhardman
1 Replies
4. IP Networking
Hello, I have a Squid Proxy Web content filtering three subnets, the matter is that each subnet has a separate gateway and with the implementation of the proxy, all traffic is routed to a single link. Any idea how to fix it?
thanks (2 Replies)
Discussion started by: kev_2108
2 Replies
5. IP Networking
Hello,
I'm trying to setup a gateway VPN between two routers across an unsecured network between two local networks. The routers are both linux and I'm using the ipsec tools, racoon and setkey. So far hosts from either local net can successfully ping hosts on the other local net without issue.
... (0 Replies)
Discussion started by: salukibob
0 Replies
6. Shell Programming and Scripting
Hi, I hope the title does not scare people to look into this thread but it describes roughly what I'm trying to do. I need a solution in PHP.
I'm a programming beginner, so it might be that the approach to solve this, might be easier to solve with an other approach of someone else, so if you... (0 Replies)
Discussion started by: lowmaster
0 Replies
7. IP Networking
hello, i need help on setting my coyote linux, i've working on this for last 5 days, can't get it to work. I've been posting this message to coyote forum, and other linux forum, but haven't get any answer yet. Hope someone here can help me...... please see my attached picture first.
... (0 Replies)
Discussion started by: dlwoaud
0 Replies
8. UNIX for Advanced & Expert Users
Hi,
I need to redirect internal internet requests to a auth client site siting on the gateway. Currently users that are authenticated to access the internet have there mac address listed in the FORWARD chain. All other users need to be redirected to a internal site for authentication.
Can... (1 Reply)
Discussion started by: mshindo
1 Replies
9. Linux
Hello There!
Why is it so difficult (read: impossible) to configure and run an internal modem in linux operating system. Not all can afford an external modem and hardware modems are obsolete as well as out of production.
Is it impossible to write software drivers for an internal modem to work... (6 Replies)
Discussion started by: Jawwad
6 Replies
GNUNET-VPN(1) General Commands Manual GNUNET-VPN(1)
NAME
gnunet-vpn - manually setup a GNUnet VPN tunnel
SYNOPSIS
gnunet-vpn [options]
DESCRIPTION
gnunet-vpn can be used to manually setup a VPN tunnel via the GNUnet network. There are two main types of tunnels. Tunnels to an exit
node which routes the traffic to the global Internet, and tunnels to a node that runs a service only within GNUnet. Depending on the type
of tunnel, gnunet-vpn takes different options. The "-i" option is required for tunnels to an exit node, whereas the "-p" and "-s" options
in conjunction with either "-u" or "-t" are required for tunnels to services. For exit tunnels, both UDP and TCP traffic will be redi-
rected. For service tunnels, either UDP ("-u") or TCP ("-t") traffic will be redirected.
The tool will display the IP address for this end of the tunnel. The address can be displayed as soon as it has been allocated, or only
after ("-a") the tunnel has been created.
OPTIONS
-4, --ipv4
Desired IP address on this end of the tunnel should be an IPv4 address.
-6, --ipv6
Desired IP address on this end of the tunnel should be an IPv6 address.
-a, --after-connect
Display IP address only after the tunnel is fully connected.
-c FILENAME, --config=FILENAME
Use the configuration file FILENAME.
-d SEC, --duration SEC
The mapping should be established for SEC seconds. Default is 5 minutes.
-h, --help
Print short help on options.
-i IP, --ip IP
Tunnel should be to an exit node and connect to the given IPv4 or IPv6 IP address. Note that you can specify an IPv6 address as the
target here, even in combination with "-4" (4to6) and similarly you can specify an IPv4 address in combination with "-6" (6to4).
-L LOGLEVEL, --loglevel=LOGLEVEL
Use LOGLEVEL for logging. Valid values are DEBUG, INFO, WARNING and ERROR.
-p PEERID, --peer=PEERID
Name of the peer offering the service to connect to. Cannot be used in conjunction with "-i", requires "-s".
-s NAME, --service=NAME
Name of the service running on the target peer. Cannot be used in conjunction with "-i", requires "-p".
-t, --tcp
Service runs TCP. Either "-t" or "-u" must be specified when using "-s".
-u, --udp
Service runs UDP. Either "-t" or "-u" must be specified when using "-s".
-V, --verbose
Be verbose.
-v, --version
Print GNUnet version number.
BUGS
Report bugs by using Mantis <https://gnunet.org/bugs/> or by sending electronic mail to <gnunet-developers@gnu.org>
SEE ALSO
gnunet-setup(1)
GNUnet 25 Feb 2012 GNUNET-VPN(1)