9 More Discussions You Might Find Interesting
1. IP Networking
Hi,I want connect my ASA 5510 firewall to a 3750 switch with RIP routing. Unfortunately,I am having issues passing the VPN subnet through rip to the 3750.I don't understand how the routing table is populated on the ASA. Any suggestions? (0 Replies)
Discussion started by: Ayaerlee
0 Replies
2. IP Networking
First of all, hello.
I have a problem installing a vpn server and client.
My server is a computer running windows 7, and windows, running a virtual machine running debian.
In the debian system, I've the vpn server installed (SoftEther VPN Server)
The problems come when I try to connect to... (1 Reply)
Discussion started by: Blues23
1 Replies
3. IP Networking
I'll try and be brief and detailed.
I have a Macbook Pro Retina running Mavericks. When on my network at the office (work) everything local works just fine. Local servers are resolved through our internal DNS settings. For example, we have a fileserver at "fs01". I can connect to it with... (1 Reply)
Discussion started by: jbhardman
1 Replies
4. IP Networking
Hello, I have a Squid Proxy Web content filtering three subnets, the matter is that each subnet has a separate gateway and with the implementation of the proxy, all traffic is routed to a single link. Any idea how to fix it?
thanks (2 Replies)
Discussion started by: kev_2108
2 Replies
5. IP Networking
Hello,
I'm trying to setup a gateway VPN between two routers across an unsecured network between two local networks. The routers are both linux and I'm using the ipsec tools, racoon and setkey. So far hosts from either local net can successfully ping hosts on the other local net without issue.
... (0 Replies)
Discussion started by: salukibob
0 Replies
6. Shell Programming and Scripting
Hi, I hope the title does not scare people to look into this thread but it describes roughly what I'm trying to do. I need a solution in PHP.
I'm a programming beginner, so it might be that the approach to solve this, might be easier to solve with an other approach of someone else, so if you... (0 Replies)
Discussion started by: lowmaster
0 Replies
7. IP Networking
hello, i need help on setting my coyote linux, i've working on this for last 5 days, can't get it to work. I've been posting this message to coyote forum, and other linux forum, but haven't get any answer yet. Hope someone here can help me...... please see my attached picture first.
... (0 Replies)
Discussion started by: dlwoaud
0 Replies
8. UNIX for Advanced & Expert Users
Hi,
I need to redirect internal internet requests to a auth client site siting on the gateway. Currently users that are authenticated to access the internet have there mac address listed in the FORWARD chain. All other users need to be redirected to a internal site for authentication.
Can... (1 Reply)
Discussion started by: mshindo
1 Replies
9. Linux
Hello There!
Why is it so difficult (read: impossible) to configure and run an internal modem in linux operating system. Not all can afford an external modem and hardware modems are obsolete as well as out of production.
Is it impossible to write software drivers for an internal modem to work... (6 Replies)
Discussion started by: Jawwad
6 Replies
RACOONCTL(8) BSD System Manager's Manual RACOONCTL(8)
NAME
racoonctl -- racoon administrative control tool
SYNOPSIS
racoonctl [opts] reload-config
racoonctl [opts] show-schedule
racoonctl [opts] show-sa [isakmp|esp|ah|ipsec]
racoonctl [opts] get-sa-cert [inet|inet6] src dst
racoonctl [opts] flush-sa [isakmp|esp|ah|ipsec]
racoonctl [opts] delete-sa saopts
racoonctl [opts] establish-sa [-w] [-n remoteconf] [-u identity] saopts
racoonctl [opts] vpn-connect [-u identity] vpn_gateway
racoonctl [opts] vpn-disconnect vpn_gateway
racoonctl [opts] show-event
racoonctl [opts] logout-user login
DESCRIPTION
racoonctl is used to control racoon(8) operation, if ipsec-tools was configured with adminport support. Communication between racoonctl and
racoon(8) is done through a UNIX socket. By changing the default mode and ownership of the socket, you can allow non-root users to alter
racoon(8) behavior, so do that with caution.
The following general options are available:
-d Debug mode. Hexdump sent admin port commands.
-l Increase verbosity. Mainly for show-sa command.
-s socket
Specify unix socket name used to connecting racoon.
The following commands are available:
reload-config
This should cause racoon(8) to reload its configuration file.
show-schedule
Unknown command.
show-sa [isakmp|esp|ah|ipsec]
Dump the SA: All the SAs if no SA class is provided, or either ISAKMP SAs, IPsec ESP SAs, IPsec AH SAs, or all IPsec SAs. Use -l to
increase verbosity.
get-sa-cert [inet|inet6] src dst
Output the raw certificate that was used to authenticate the phase 1 matching src and dst.
flush-sa [isakmp|esp|ah|ipsec]
is used to flush all SAs if no SA class is provided, or a class of SAs, either ISAKMP SAs, IPsec ESP SAs, IPsec AH SAs, or all IPsec
SAs.
establish-sa [-w] [-n remoteconf] [-u username] saopts
Establish an SA, either an ISAKMP SA, IPsec ESP SA, or IPsec AH SA. The optional -u username can be used when establishing an ISAKMP
SA while hybrid auth is in use. The exact remote block to use can be specified with -n remoteconf. racoonctl will prompt you for
the password associated with username and these credentials will be used in the Xauth exchange.
Specifying -w will make racoonctl wait until the SA is actually established or an error occurs.
saopts has the following format:
isakmp {inet|inet6} src dst
{esp|ah} {inet|inet6} src/prefixlen/port dst/prefixlen/port
{icmp|tcp|udp|gre|any}
vpn-connect [-u username] vpn_gateway
This is a particular case of the previous command. It will establish an ISAKMP SA with vpn_gateway.
delete-sa saopts
Delete an SA, either an ISAKMP SA, IPsec ESP SA, or IPsec AH SA.
vpn-disconnect vpn_gateway
This is a particular case of the previous command. It will kill all SAs associated with vpn_gateway.
show-event
Listen for all events reported by racoon(8).
logout-user login
Delete all SA established on behalf of the Xauth user login.
Command shortcuts are available:
rc reload-config
ss show-sa
sc show-schedule
fs flush-sa
ds delete-sa
es establish-sa
vc vpn-connect
vd vpn-disconnect
se show-event
lu logout-user
RETURN VALUES
The command should exit with 0 on success, and non-zero on errors.
FILES
/var/racoon/racoon.sock or
/var/run/racoon.sock racoon(8) control socket.
SEE ALSO
ipsec(4), racoon(8)
HISTORY
Once was kmpstat in the KAME project. It turned into racoonctl but remained undocumented for a while. Emmanuel Dreyfus <manu@NetBSD.org>
wrote this man page.
BSD
March 12, 2009 BSD