FFserver version 0.6.3, Copyright (c) 2000-2010 the FFmpeg developers
built on Nov 29 2011 12:54:27 with gcc 4.5.1
configuration: --enable-cross-compile --cross-prefix=/home/projects/itouch/renesas/SH7724_install07/bsp/buildroot/output/host/usr/bin/b
libavutil 50.15. 1 / 50.15. 1
libavcodec 52.72. 2 / 52.72. 2
libavformat 52.64. 2 / 52.64. 2
libavdevice 52. 2. 0 / 52. 2. 0
libswscale 0.11. 0 / 0.11. 0
FFmpeg version 0.6.3, Copyright (c) 2000-2010 the FFmpeg developers
built on Nov 29 2011 12:54:27 with gcc 4.5.1
configuration: --enable-cross-compile --cross-prefix=/home/projects/itouch/renesas/SH7724_install07/bsp/buildroot/output/host/usr/bin/b
libavutil 50.15. 1 / 50.15. 1
libavcodec 52.72. 2 / 52.72. 2
libavformat 52.64. 2 / 52.64. 2
libavdevice 52. 2. 0 / 52. 2. 0
libswscale 0.11. 0 / 0.11. 0
sh_mobile_ceu sh_mobile_ceu.0: SuperH Mobile CEU driver attached to camera 0
[video4linsh_mobile_ceu sh_mobile_ceu.0: Format 32315559 not found
ux2 @ 0x442c20][sh_mobile_ceu sh_mobile_ceu.0: Format 32315559 not found
sh_mobile_ceu sh_mobile_ceu.0: Format 50323234 not found
sh_mobile_ceu sh_mobile_ceu.0: dma_alloc_coherent of size 614400 failed
[video4linux2 @ 0x442c20]Estimating duration from bitrate, this may be inaccurate
Input #0, video4linux2, from '/dev/video0':
Duration: N/A, start: 1636986972.390231, bitrate: 117964 kb/s
Stream #0.0: Video: rawvideo, yuyv422, 640x480, 117964 kb/s,sh_mobile_ceu sh_mobile_ceu.0: SuperH Mobile CEU driver detached from ca0
24 tbr, 1000k tbn, 24 tbc
http://localhost:11000/webcam.ffm:Input/output error
ioctl(VIDIOC_QBUF)
--> It seems for me that ffserver does NOT open the conf file, hence webcam.ffm file is NOT opened.
I've tried to move the conf file to some other path or to change its name, but it wouldn't help.
I've also tried to remove the "-f /etc/ffserver.conf" (default location is anyway /etc/ffserver.conf), but it also wouldn't help.
--> As far as I can tell the problem is that ffserver does NOT care about its conf file
Do you have any idea? I'm lost....
Thanks
Code:
The ffserver.conf file is:
==================
Port 8090
# bind to all IPs aliased or not
BindAddress 0.0.0.0
# max number of simultaneous clients
MaxClients 4
# max bandwidth per-client (kb/s)
MaxBandwidth 10000
CustomLog -
# Suppress that if you want to launch ffserver as a daemon.
NoDaemon
<Stream status.html>
Format status
# Only allow local people to get the status
#ACL allow localhost
#ACL allow 192.168.0.0 192.168.255.255
</Stream>
<Feed webcam.ffm>
File /tmp/webcam.ffm
FileMaxSize 5M
</Feed>
# FLV output - good for streaming
<Stream webcam.flv>
# the source feed
Feed webcam.ffm
# the output stream format - FLV = FLash Video
Format flv
VideoCodec flv
# this must match the ffmpeg -r argument
VideoFrameRate 24
# generally leave this is a large number
VideoBufferSize 50 #Aviv: changed from 20000
# another quality tweak
VideoBitRate 100
# quality ranges - 1-31 (1 = best, 31 = worst)
VideoQMin 5
VideoQMax 10
VideoSize qvga
# this sets how many seconds in past to start
PreRoll 0
# wecams don't have audio
Noaudio
</Stream>
# ASF output - for windows media player
<Stream webcam.asf>
# the source feed
Feed webcam.ffm
# the output stream format - ASF
Format asf
VideoCodec msmpeg4
# this must match the ffmpeg -r argument
VideoFrameRate 24
# generally leave this is a large number
VideoBufferSize 80000
# another quality tweak
VideoBitRate 200
# quality ranges - 1-31 (1 = best, 31 = worst)
VideoQMin 1
VideoQMax 10
VideoSize 640x480
# this sets how many seconds in past to start
PreRoll 0
# wecams don't have audio
Noaudio
</Stream>
<Stream webcam.mjpeg>
Feed webcam.ffm
Format mpjpeg
VideoSize qvga
VideoFrameRate 24
VideoIntraOnly
# Noaudio
Strict -1
</Stream>
same command and the ffserver.conf file did work on Ubuntu
Hello Jim, thanks for your reply.
Same command and the ffserver.conf file did work on Ubuntu, so I assume it should work on the embedded processor as well.
The permissions are fine (777, and the owner and group are "root").
I'm pretty sure that the problem is in the -f switch in the ffserver command. I noticed that even when I point to a path which does NOT exist, the command is issued with no error (for example: ffserver -f /etc111/ffserver.conf).
No matter what I put inder the -f switch, the comamnd did NOT return an error (unless nothing was after the -f).
The -d switch does not change anything (no info is shown on screen).
What did you main in your reply - "# should be
ffserver -f /etc/ffserver.conf & ffmpeg && ..........."?
It's fine with me that the ffmpeg is in foreground.
I am getting error on redis server on linux 7.5 after change the default path /var/lib/redis to /redisdata, and enable cluster-enabled yes. It would be really appreciate if some one can check and suggest on this issue.
error code:
1240:C 09 Sep 2018 13:53:51.058 # oO0OoO0OoO0Oo Redis is... (3 Replies)
Hi,
I've installed Solaris 11.3(live media) and configured DNS. Everytime I reboot the server, resolv.conf got deleted and it created a new nsswitch.conf.
I used below to configure both settings:
# svccfg -s dns/client
svc:/network/dns/client> setprop config/nameserver = (xx.xx.xx.aa... (1 Reply)
Hello all,
Newbie here.
I'm currently tasked with updating rsyslog.conf and auditd.conf on a large set of servers. I know the exact logging configurations that I want to enable. I have updated both files on on a server and hope to use the updated files as a template for the rest of the... (3 Replies)
Hi,
Lets say I have a script which reads a conf file (say MASTERFILE) line by line to fetch file_name, source_path, dest_path. But currently, here the file name are static for eg: ABC.txt or XYZ.txt. So i have hard-coded in the conf file.
So what happens that the script picks up the file_name... (1 Reply)
Hi all, i have a scenario below:
<========> <=========> Internet
With IP:
-Local: 10.0.0.2
-Squid: 2NICs (10.0.0.1 and 192.168.100.1)
-Internet: 192.168.100.2
* On Squid: hosting a website name www.sample.com
* On Local: hosting a website name www.abc.sample.com
* Complete DNS... (0 Replies)
First post, sorry to be a bother but this one has been dogging me. I have a process user (java application server) that trips a resource limit every couple weeks and need help finding what limit we're hitting.
First, this is what's running:
This is the error when jobs are run or the... (0 Replies)
i have this program running on my solaris and there are two identical config files, i am not sure which one is being used by this program but I am sure it uses one of them.
I run lsof -p {pid} but it does not show which config file has been read by this program, what i am doing wrong?
thanks (4 Replies)
HI,
I want a help for Configuring snmpd.conf and snmptrapd.conf (i.e Configuring SNMP)
for receiving
TRAPS in my networks. I am using RHEL4.0 OS.
Please tell me How I can configure above two files in a proper way and at an
advanced level.
Especially I am getting... (2 Replies)
Hi
I tried a lot bt could not configure snmptrapd.conf...
Can any one tell me the steps or give me the configured snmptrapd.conf file??
Its really important..Plz help me..
Thanx (0 Replies)