Hi gurus of unix, I haved installed my openSolaris in a HP530,
Recently I use the following command
beadm destry opensolaris1
beadm destry opensolaris2
After That I reboot my Laptop.
Well when I go to my work I try to open my wireshark tool, but the option in GUI interface does not appear!!!
To run the Wireshark I put the following command:
andres@opensolaris:~$ export PATH=/usr/gnu/bin:/usr/bin:/usr/X11/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/perl5/bin
andres@opensolaris:~$ wireshark
After That, I put the command wireshark
I Observe the folling messages after put wireshark command
dumpcap: There are no interfaces on which a capture can be done
dumpcap: There are no interfaces on which a capture can be done
dumpcap: There are no interfaces on which a capture can be done
dumpcap: There are no interfaces on which a capture can be done
dumpcap: There are no interfaces on which a capture can be done
dumpcap: There are no interfaces on which a capture can be done
dumpcap: There are no interfaces on which a capture can be done
dumpcap: There are no interfaces on which a capture can be done
I have the following interfaces:
andres@opensolaris:~$ dladm show-link
LINK CLASS MTU STATE OVER
iprb0 phys 1500 down --
wpi0 phys 1500 up --
vboxnet0 phys 1500 unknown --
andres@opensolaris:~$ dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
iprb0 Ethernet down 0 half iprb0
wpi0 WiFi up 11 unknown wpi0
vboxnet0 Ethernet unknown 0 unknown vboxnet0
andres@opensolaris:~$ ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
iprb0: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 2
inet 0.0.0.0 netmask 0
wpi0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 3
inet 192.168.1.33 netmask ffffff00 broadcast 192.168.1.255
vboxnet0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 0.0.0.0 netmask 0
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
wpi0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 3
inet6 fe80::21c:bfff:fe4c:6c95/10
andres@opensolaris:~$
Any guru That can show me how to aggragete these interfaces in My wireshark Tool, please