Earlier I said that the modem was set in "bridged mode", but in actuality it was in "IP pass-through mode" giving the public IP to the external interface. Since the default IP of the Motorola 2210 is 192.168.1.254, it was requesting the DHCP address and since the routing of the server knows that the internal interface is on 192.168.1.x, well, my situation...
My solution was to set the PPP Location (the newer 2210's don't have a ethernet bridge mode) from internal to "on computer or external router. I then configured PPPoE on the external interface of the server to initiate the DSL connection. Also had to change all the IPTables rules to use ppp0 instead of eth0 to get the masquerade and forward rules to work again.
Hello All,
OS: openSUSE 13.1 (Bottle) (armv7hl)
PC: CuBox-i (*mini-pc)
The PC in question is a CuBox-i mini-pc. Since this PC doesn't have a battery, everytime the PC reboots the hardware clock is reset back to the same date every time, which is "2014-07-08 00:00".
I have NTP configured... (5 Replies)
I'm trying to figure out what circumstances would cause an Open Solaris 11.2 host to switch itself from a static to a DHCP ip address upon reboot. This has only happened once but is a cause for some concern as this machine will be part of a web server pool.
Nothing has changed on the LAN that... (2 Replies)
Hello everyone! I am brand new at this forum thing and wanted to thank all of you for your time and help in advance for helping me troubleshoot my issue.
I am fairly new to shell scripting and scoured the entire internet to find a solution for my issue to no avail and hope you're able to help.
... (2 Replies)
I have a straaaaaaange problem with a Solaris 10 host acting as a dhcp server. I can not get an ip adress allocated even though the configuration works in an almost exact setup for another Solaris 10 host.
The <host> in question has one piece of BOOTP booting <equipment> hooked up to bge0, with... (0 Replies)
I have one issue with my existing code.Actually i want to write parameter's at the end of the section not begin of section.please find my code snapshots...
while read cfgfilename sectionname parameter
do
case "$cfgfilename" in
cfgfilename)
FILE=$HOME/config/$parameter
unset... (1 Reply)
I am using MKS tool kit on windows server. One config variable is defined in windows environment and I am trying to use that variable.
# Below RootDir is defined in windows
RootDir="\\f01\var"
# in unix script
details="$RootDir/src|$RootDir/tgt"
src=`echo $details|awk -F '|' '{print... (1 Reply)
Hi All,
I have configured a centralised system log server.
The /etc/syslog.conf file in my client(Sol 5.10) looks like this.
e1011605: cat /etc/syslog.conf
#
# Copyright (c) 2000-2002 by Sun Microsystems, Inc.
# All rights reserved.
#
#ident "@(#)syslog.conf 2.3 ... (2 Replies)
I have a server/domain on a m5000 running Solaris 10. It is part of a cluster.
The other cluster member sees tape drives, but this one does not.
It is zoned correctly, and I can see the drives are binded in lputil.
The st.conf, and devlink.tab are identical.
ST.CONF: -
#
# Copyright... (2 Replies)
I want to build a little website on a Sun Blade 100 running Solaris 10.
I just went out to apache.org and downloaded Unix Source: httpd-2.2.8.tar.gz
After unpacking the tarball, I CD'd into the subdirectory and ran the configure utility. Of course, it crapped out. I see that it is... (17 Replies)