I am looking for advice on a router. I am new to Linux and am trying to use Limewire and Ktorent and can make no connection. Limewire indicates I have a firewall. I have a Linksys router WRK54G and my guess is that is the problem. I have spent hours upon hours trying to get it to work using info from this site and Limewire.com to get past the firewall problem with no success. I think I did all the router changes thru the web I could and am having no success. I am wondering if there is a router which works with broadband cable I can purchase which would alleviate the firewall problem. The Linksys cuts out often (not as much with Freespire) so an upgrade may help with that also. If anyone thinks my problem is not with my wireless router I would appreciate direction there also
Hi,
I am trying to add a static route in one of 3 server (S3) so that I can access the main application server (S1). But problem is, the server (S3) where I am trying to add static route is connected with another server (S2) which is in same private network of application server (S1).
I have... (9 Replies)
Hello *nix friends,
I've written a shell script that allow web admin's to copy file/folder from a development site to the production site. It's more or less a poor man SVN.
I'm posting the script here because I was able to get many questions answered through this forum and also, I want to... (4 Replies)
Hi
I'm trying to upload my website via FTP FileZilla with 123-reg on a Linux package. I built my site using iWeb which tells me that it's ok to publish to FTP which I do and it downloads the directories ok. It connects then stops saying econnreset by peer.
I've no idea what this means and I... (3 Replies)
hi,
I have developed a very simple echo client/server application. I expect whenever i shutdown the server machine, the client peer detects the shutdown.In reality this doesn't happen and client continues to send and receive data.To my surprise, it even recv() returns with value greater than... (4 Replies)
hi everyone.
As a solaris/unix beginner, I am trying a peer-to-peer connection with my Sun and Windows.
Here is my setup:
-Windows XP
-Sun System (Netra T1) which is connected to the console of the WinXP machine.
-Windows XP has wireless connection which enables me to access internet ... (3 Replies)
Hello Guys,
Can I do a search on a different IP address remotely without sshing or using rsh.
Something in lines of : find DIFF_IP:DIRNAME -name "*.log" -print0
Thanks (1 Reply)
Hey all !
I have a nice question ( maybe simple one ).
I coded a simple server , chat server. I want to implement send files options. But here I come to a nasty thing .. I cannot face out.
Let's say that two clients are already connected to the server.( clients are just from another contry... (0 Replies)
Hello all,
Ok here is my deal. I have almost convinced the wife to let me remove WIN2k from our family machine and install some flavor of open source. I'm think Red Hat at this piont.
The only things I need to keep her happy is some peer to peer file shareing program (like kazaa) and AIM or... (2 Replies)
router.db(5) File Formats Manual router.db(5)NAME
router.db - rancid group configuration file
DESCRIPTION
router.db contains information for devices which are members of a rancid group. control_rancid(1) reads this file to compile a list of
devices which it should collect.
SYNTAX
One device is listed per-line, where the syntax is:
<device_name>:<device_type>:<state>[:comments]
For example:
scooby.shrubbery.net:cisco:up
The fields are as follows:
<device_name>
The name of the device, which must resolve via gethostbyname, used as the argument to telnet(1), rsh(1), or ssh(1), to connect to
the device. Once converted to lower-case, this also becomes the name of the file used to store the configuration under
$BASEDIR/<group>/configs.
Experience has shown that using the device's FQDN (Fully Qualified Domain Name) works best, as in the example above.
<device_type>
The type of device from the set:
agm A Cisco Anomaly Guard Module (aka Riverhead). Suspect that at some point the UI will become more cisco-like and it can be
merged with the IOS rancid module.
alteon An Alteon WebOS switches.
arista An Arista Networks device.
avocent
An Avocent Cyclades console server.
baynet A Bay Networks router.
cat5 A Cisco catalyst series 5000 and 4000 switches (i.e.: running the catalyst OS, not IOS).
cisco A Cisco router, PIX, or switch such as the 3500XL or 6000 running IOS (or IOS-like) OS, but not IOS-XR.
cisco-nx
A Cisco Nexus switch/router.
cisco-xr
A Cisco device running IOS-XR.
css A Cisco content services switch.
enterasys
An enterasys NAS. This is currently an alias for the riverstone device type.
erx A Juniper E-series edge router.
extreme
An Extreme switch.
ezt3 An ADC-Kentrox EZ-T3 mux.
f5 A F5 BigIP switch.
force10
A Force10 router.
fortigate
A Fortinet firewall.
foundry
A Foundry router, switch, or router-switch. This includes HP Procurve switches that are OEMs of Foundry products, such as
the HP9304M.
hitachi
A Hitachi router.
hp A HP Procurve switch such as the 2524 or 4108 procurve switches. Also see the foundry type.
juniper
A Juniper router.
mikrotik
A Mikrotik router.
mrtd A host running the (Merit) MRTd daemon.
netscalar
A Netscalar load balancer.
netscreen
A Netscreen firewall.
procket
A Procket router.
redback
A Redback router, NAS, etc.
riverstone
A Riverstone NAS or Cabletron (starting with version ~9.0.3) router.
smc A SMC switch (some Dell OEMs).
tnt A Lucent TNT.
zebra Zebra routing software.
<state>
The state is either "up", or some other arbitrary value, e.g. "down". If the device is not marked "up" the device's configuration
will not be collected. It is highly recommended that comments are made for any router not listed as up, so as to indicate the
reason a router is not to be polled, e.g.:
dial1.paris:cisco:up:
core1.paris:cisco:down:in testing until 5/5/2001.
core2.paris:cisco:ticketed:Ticket 6054234, 5/3/2001
border1.paris:juniper:up:
The script "downreport" in util/ can be used to produce a report of routers in router.db that are not marked "up".
[comments]
Freeform string to describe the current state of the router.
A ``#'' at the beginning of a line is a comment; the entire line is ignored.
If a device is deleted from the router.db file, then rancid will clean up by removing the device's config file from
$BASEDIR/<group>/configs. The device will be removed from the revision control system. It is possible, in most cases, to resurrect or
check-out copies of deleted device configurations.
FILES
$BASEDIR/<group>/router.db
Configuration file described here, where <group> is a device group name defined in the variable LIST_OF_GROUPS within
$BASEDIR/etc/rancid.conf.
SEE ALSO control_rancid(1), rancid(1), rancid.conf(5)
24 April 2011 router.db(5)