I have run into a wall troubleshooting a Centos 5 networking issue. Hoping someone can assist.
I've got a box with two vlans trunked over bond0
I am able to ping and ssh to the vlan 200 ipaddress, however I cannot ping or ssh to the vlan 129 address. Or atleast it appears this way becuase when I use tcp dump I can see a ping request come in the bond.129 interface but the response never goes back out.
First off I can ping out via the vlan 129 address. in the example below i am pinging the default gw of this vlan.
Hi,
Please help me on issue described below,
I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4.
M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop.
At M2, I have done following,... (1 Reply)
we are not able to ping client server (falcon-ebr.sbms.bsc.com) from netbackup master server (135.179.96.122 tsprd-ebr.edc.single.net)
However from client server we are able to ping the master Server.
Please assist on this (1 Reply)
Hi, The default gateway (172.17.220.1) cannot be pinged via the default interface bond0 (172.17.220.231), but can be pinged via interface eth1 (10.201.135.73).
# ping -I eth1 172.17.220.1
PING 172.17.220.1 (172.17.220.1) from 10.201.135.73 eth1: 56(84) bytes of data.
64 bytes from... (4 Replies)
hi guys
suse 11 SP1 x64
I have a server (4 NIC ports 192.168.100.100-103) that connects point to point to a storage device (same thing 4 ports 192.168.110.100-113) but this server connects to normal LAN 10.6.100.x - gateway 10.6.100.1
the issue is when testing connectivity to the storage... (7 Replies)
I have an IP routing issue or I am just to stupid to work it out myself.
I have setup am old PC running SUSE Linux 11.3 as a router, the system has 3 Interfaces connecting 3 networks.
Interface 1 = 10.164.2.161/21
Interface 2 = 192.168.1.210/24
Interface 3 = 30.1.0.11/16
The default... (6 Replies)
Hello,
I've moved to a new network with multiple AIX box's. Most of them are working fine and dandy.
On one box I need to set up a static route to a gateway.. no problem right?
Whenever I add the route it appears in the routing table as UGc and then begins adding new entries to the... (1 Reply)
I am using RedHat Linux 9, In this box their are two lan intefaces.
eth0 ====> LAN
192.168.100.100
255.255.255.0
eth1 ====> Internet
Static IP
255.255.255.0
59.144.168.226 (Gateway)
I want to define a gateway 59.144.168.226 for my LAN... (2 Replies)
Hello Friends
I have two network cards
eth0 192.168.100.1
eth1 10.0.0.1
There NIC connect with diff. LAN
I want to make my Linux machine as a Router, Please tell me
using
IPTABLES command
ROUTE command
:) (2 Replies)
Can anyone help with the following;
I am working on a unix server (Apple OS X Server). We have two network cards in the server. Both cards are on different subnets i.e en1 is on 192.168.10.10/24 and the built in ethernet is on 10.10.150.10/24. From a computer plugged into en1 (and set to ip... (5 Replies)