Dear friends
I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Dear Sir
I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper.
I am having a problem, configuring static call routing on GNUGK
in the section
... (0 Replies)
I set up remote printing on a clients Unix server to my Windows XP USB printer. My USB printer is connected directly to my PC (no print server and no network input on printer). With my Win XP PC connected to my cable modem (without the router), i can do
lp -dhp842c /etc/hosts and it prints. I... (7 Replies)
xorp(1) General Commands Manual xorp(1)NAME
xorpsh -- XORP Command Shell
SYNOPSIS
xorpsh [-c command] [-t directory] [-e] [-h] [-v]
DESCRIPTION
This manual page documents briefly the xorpsh command.
This manual page was written for the Debian distribution because the original program does not have a manual page.
xorpsh is the command used to interact with a eXtensible Open Router Platform (XORP) router. This command starts up a command line inter-
face (CLI), that allows the configuration of the router and monitoring of the router state.
The xorpsh command provides an interactive command shell to a XORP user, similar in many ways to the role played by a Unix shell. In a
production router xorpsh might be set up as an user's login shell - they would login to the router via ssh and be directly in the xorpsh.
It can also be run directly from the Unix command line.
xorpsh should normally be run as a regular user; it is neither necessary or desirable to run it as root. If an user is to be permitted to
make changes to the running router configuration, that user needs to be in the Unix group xorp.
The Debian package installation automatically sets up both a xorp user and a xorp group to which this user belongs. However, any user can
run the xorpsh command unless locally restricted by the administrator.
OPTIONS
xorpsh allows the following options:
-h Show summary of options.
-v Print verbose information.
-c command
Specify command(s) to execute.
-t directory
Specify templates directory.
-e Exit immediately if cannot connect to the rtrmgr
SEE ALSO
xorp_rtrmgr (8)
This program is documented fully in the Xorp User Manual, chapter Command Structure, available at /usr/share/doc/xorp-doc/ in Debian sys-
tems when the xorp-doc package is installed.
AUTHOR
XORP is Copyright (c) 2001-2009 XORP, Inc.
This manual page was written by Javier Fernandez-Sanguino jfs@debian.org for the Debian system (but may be used by others). For licensing
details please see /usr/share/doc/xorp/copyright.
xorp(1)