4GB Dual Port HBA


 
Thread Tools Search this Thread
Special Forums IP Networking 4GB Dual Port HBA
# 1  
Old 02-17-2009
4GB Dual Port HBA

I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?

Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks.

Last edited by jwholey; 02-17-2009 at 02:03 PM..
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies

2. AIX

NPIV with 8Gb PCI Express Dual Port FC Adapter

All I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable: $ lsnports name physloc ... (4 Replies)
Discussion started by: johnf
4 Replies

3. AIX

How to check if my AIX server has Dual HBA's?

Thanks I need to know if my server has dual HBA and if multipath has been configured. For Multipath I ran lspath and it shows all drives and if MPIO is configured for that drive. Thanks for any input. (2 Replies)
Discussion started by: 300zxmuro
2 Replies

4. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies

5. Solaris

Few things related to HBA port & fcinfo command

Hi Gurus I need to know few things related to HBA port & fcinfo command I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Discussion started by: girish.batra
6 Replies

6. Solaris

Solaris 10. fcinfo hba-port shows adapter not Found

I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install? Thanks in advance.... (23 Replies)
Discussion started by: Y4Net
23 Replies

7. AIX

Dual port NIC, cfgmgr

OS: AIX 6.1 The host has a dual port NIC installed and when I went to run `cfgmgr -v` to configure it I got an error showing device packages are missing from the install: `cfgmgr -v` on 10.15.xx.xxx cfgmgr: 0514-621 WARNING: The following device packages are required for device support but... (3 Replies)
Discussion started by: b1f30
3 Replies

8. Shell Programming and Scripting

spliting 4gb files to 4*1 gb each

I have log file whose size is 4 GB , i would like to split it to 1 gb each ,Can any one tell me the syntax of csplit comand for that. I am using Sun0S 5.8 (3 Replies)
Discussion started by: jambesh
3 Replies

9. AIX

fiber with 4GB

Hi, It's my first time I will use a 4BG fiber with two ports on one card. I used only one port 2GB before. What will be the drivers I need to install on my AIX5.3? Is the two ports going to be just one line? Or I can use the other ports on another connection. Thanks in advance, itik (1 Reply)
Discussion started by: itik
1 Replies
Login or Register to Ask a Question
HBA_GetBindingCapability(3HBAAPI)	      Common Fibre Channel HBA Information Library Functions		 HBA_GetBindingCapability(3HBAAPI)

NAME
HBA_GetBindingCapability, HBA_GetBindingSupport, HBA_SetBindingSupport - return and sets binding capabilities on an HBA port SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ] #include <hbaapi.h> HBA_HANDLE HBA_GetBindingCapability(HBA_HANDLE handle, HBA_WWN hbaPortWWN, HBA_BIND_CAPABILITY *pFlags); HBA_STATUS HBA_GetBindingSupport(HBA_HANDLE handle, HBA_WWN hbaPortWWN, HBA_BIND_CAPABILITY *pFlags); void HBA_SetBindingSupport(HBA_HANDLE handle, HBA_WWN hbaPortWWN, HBA_BIND_CAPABILITY Flags); PARAMETERS
handle an open handle returned from HBA_OpenAdapter(3HBAAPI) hbaPortWWN the Port WWN of the local HBA through which the binding capabilities implemented by the HBA is returned pFlags a pointer to an HBA_BIND_CAPABILITY structure that returns the persistent binding capabilites implemented by the HBA Flags an HBA_BIND_CAPABILITY structure containing the persistent binding capabilites to enable for the HBA DESCRIPTION
The HBA_GetBindingCapability() function returns the binding capabilities implemented by the HBA. The HBA_GetBindingSupport() function returns the currently enabled binding capabilities for the HBA. The HBA_SetBindingSupport() function sets the currently enabled binding capabilites for the HBA to a subset of the binding capabilities implemented by the HBA. RETURN VALUES
The HBA_GetBindingCapability() and HBA_GetBindingSupport() functions return the following values: HBA_STATUS_OK Persistent binding capabilites have been returned. HBA_STATUS_ERROR_ILLEGAL_WWN Port WWN hbaPortWWN is not a WWN contained by the HBA referenced by handle. HBA_STATUS_ERROR_NOT_SUPPORTED The HBA handle specified by handle does not support persistent binding. HBA_STATUS_ERROR An error occurred. The value of pFlags remains unchanged and points to the persistent binding capabilites. The HBA_SetBindingSupport() function returns: HBA_STATUS_OK Persistent binding capabilites have been enabled. HBA_STATUS_ERROR_ILLEGAL_WWN Port WWN hbaPortWWN is not a WWN contained by the HBA referenced by handle. HBA_STATUS_ERROR_NOT_SUPPORTED The HBA handle specified by handle does not support persistent binding. HBA_STATUS_ERROR_INCAPABLE The flags argument contains a capability not implemented by the HBA. HBA_STATUS_ERROR An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-------------------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-------------------------------------+ |Interface Stability |Standard: FC-MI 1.92 (API version 1) | +-----------------------------+-------------------------------------+ | |Standard: FC-HBA Version 4 (API ver- | | |sion 2) | +-----------------------------+-------------------------------------+ |MT-Level |Safe | +-----------------------------+-------------------------------------+ SEE ALSO
libhbaapi(3LIB), attributes(5) T11 FC-MI Specification SunOS 5.11 1 Sep 2003 HBA_GetBindingCapability(3HBAAPI)