Sorry for the confusion; my new disk is in the adress c0t4d0 , I took information from various logs, thats why I have different adresses. I have only 2 disk, one is the original ( this has the operating system), and the new where the copy should be.
The new disk is a SEAGATE ST336607LW ( adress 4 c0t4d0)
The original disk is a :
disk 0 8/0/19/0.6.0 sdisk CLAIMED DEVICE SEAGATE
ST34572WS
/dev/dsk/c0t6d0 /dev/rdsk/c0t6d0
( also I try to do it from a ST336607LW that only have defined 4 gigas of a volume group, it was originally cloned from a ST34572WS , in both cases I fail)
My workstation is an HP Visualize b132L+.
Quote:
What commands do you use to boot off the second disk?
In the halt mode I do :
>SEA
>boot P1 (asuming that the new disk is in P1)
Quote:
Exactly what result do you get when you try to boot?
It start booting, then start to load the kernel, then a new screen appears, with a lot information ( something like memory addresses) and then reboots. This happens very fast, so I cant read the errors.
ANdryk: I can boot from my second disk,but it fails loading my kernel.
Thanks