I try to start a integrity vm machine using ignite-ux
and my usual dhcp server on linux.
Ip of server ignite is =192.168.0.16
Ip of dhcpd is = 192.168.0.2
Ip of client vm = 192.168.0.18
I try to boot from lan
On linux i configure dhcp
and tftp
What i miss?
if i try using -s /tftpboot or similar give me error code 2h
Intel pxe clients linux and tftp clients works fine
Well Ignite was written first for bootp and tftp... and so as far as I can remember when using it, you are to be in the same subnet as the server or have a server in every subnet where HP boxes are...
Is this the case?
"PHNE_36209 or a superseding bootpd patch must be used to enable the configuration of Next Server response."
---------- Post updated at 11:45 AM ---------- Previous update was at 11:45 AM ----------
But there's a problem: is an old patche probably superseeded
---------- Post updated at 11:59 AM ---------- Previous update was at 11:45 AM ----------
Quote:
Originally Posted by vbe
Well Ignite was written first for bootp and tftp... and so as far as I can remember when using it, you are to be in the same subnet as the server or have a server in every subnet where HP boxes are...
Is this the case?
Same subnet
---------- Post updated at 01:38 PM ---------- Previous update was at 11:59 AM ----------
SOLUTION FOUND!
I use a vmswitch on the same lan card of ignite server
must be on separate lan
for example
lan0: hosthp,ignite server
lan1:virtual switch on the same subnet of ignite server.
Hello.
Doing my first steps in Linux and while trying to configure a DHCP server in Linux i encountered some problems:
TOPOLOGY:
- Laptop with Windows 8.1
- VM Player 12 with Linux installed (Ubuntu Server 14.04)
- ICS-DHCP-SERVER installed and running
- Another LAPTOP conected to a... (1 Reply)
I need to find out the MAC address of an IP leased from DHCP server .
For Eg:-i need to know the MAC of the below mentioned IP at the below mentioned time .
IP : 172.16.28.90
Date :Sunday July 2nd 2011
Time : 14.07.2011
OS -Solaris 10
Vital QIP IP management software using to... (0 Replies)
Where can you find your DHCP Server address? I checked all of the files that this mentioned with no luck.
Quick HOWTO : Ch08 : Configuring the DHCP Server - Linux Home Networking (6 Replies)
Hi All,
I am getting below error while igniting(restoring image) on 2470 server. i tried with different images it is giving same error. please help me out to resolve this issue
* Making VxFS filesystem for "/usr/aethos/snss/suppimpapp1",
(/dev/vg00/rsuppimpapp1).
*... (3 Replies)
Sorry if this has been asked and answered, but I can't find this particual problem. I've had an Ignite server running for years on a small internal network with images we load on daily basis. Tried to load two servers, L2000 and C3600 , both with same problem.
# boot lan.192.168.2.2 install
... (0 Replies)
I need to setup a DHCP server in our office for Macs, Windows (98/ME/NT/2000) Linux and Unix servers and workstations. We want it on a Unix server, but I'm unsure what is out there. The Unix world is new to me, so any suggestions would be appreciated.
Thanks!
Corey (2 Replies)