I am following the HPUX 11.31 install/update guide and I am trying to install "Update-UX" from the installation media. I put the CD into the drive, and I am trying to mount the device. The instructions state:
however I do not see a CDROM device in the results:
The machine is an HP Integrity rx2660. Is one of these devices the cdrom drive? I believe it is supposed to say CD or DVD in the description.
edit: solved. I had to mount the UsbScsiAdaptor as the cdrom device.
Yes, there was apparently no CDROM when the system booted.
Run ioscan without -k to now probe the SCSI buses (takes 15-60 seconds).
A typical entry for a (directly connected) CDROM:
Yes, there was apparently no CDROM when the system booted.
Run ioscan without -k to now probe the SCSI buses (takes 15-60 seconds).
A typical entry for a (directly connected) CDROM:
Thank you for the suggestion. I ran the command without -k and this was my result:
Hm, it appears to be the same.
In your example:
^ What about this output tells you it is a CDROM device? I am unsure of what all of the output information means.
EDIT: I think I understand what vbe mentioned earlier. The cdrom device was using the ucb scsi adaptor, so I ran the following command:
the cdrom mounted properly. I am not really sure why the cdrom device appeared under the usb scsi adaptor, when I searched online I did not see this as an example.
Installing SCO UNIX 507 on Dell Poweredge T610. It has no floppy so I downloaded the BTLD onto CD from SCO site to load without floppy drive. BTLD loads ok. when i get to the Media to be used, no matter what option i chose i get the error: No controller for device you have chosen. During bootup you... (9 Replies)
Good day everyone,
I am trying to install some new senmail patch on my Solaris 10 system.
I know the cdrom for my CP3260 blade servers in my rack worked for the last patches installed. However, when I went to copy from the .tar file from the cdrom to the /tmp. I received an error cannot... (2 Replies)
Hi everybody
Having a strange problem on a x4270m2 Sun server.
Jumpstarting it from dvd drive. After install the dvddrive does not exist.
Be aware jumpstart is custommade
bash-3.00# mount -F hsfs -o ro /dev/dsk/c1t4d0p0 /cdrom
mount: No such device
mount: cannot mount... (7 Replies)
Hello, I have a problem on my backup server. I lost my system hdd and my separate ZIL device while the system crashs and now I'm in trouble. The old system was running under the least version of osol/dev (snv_134) with zfs v22.
After the server crashs I was very optimistic of solving the problems... (2 Replies)
Hi,
I've seen similar posts on this board about ejecting CDROMs but I've tried the solutions people suggested but still cannot eject the CD. It's stuck in a production box so I can't reboot it...
bash-3.00# eject -f cdrom
/vol/dev/dsk/c0t0d0/sol_10_106_sparc/s0: Device busy
bash-3.00#... (14 Replies)
Hi all,
I am looking at a MC cluster comprised of 2 nodes. There is a package named backup which does nothing more than mount a VG.
At one point we noticed errors in syslog that look like this:
cmclconfd: Could not access device file /dev/dsk/c20t0d0: No such file or directory
There are... (1 Reply)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
how would I search through subdirectories under the current directory and delete all files in certain directories.
in ThisDirectory....
want to go into foundMe directory which there are several in other subdirectories and delete all files in foundMe ?
thank you... (1 Reply)