Login or Register to Ask a Question and Join Our Community


HP-UX

How to start X window?

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems HP-UX How to start X window?
# 15  
Old 12-30-2011
/var/adm/syslog/syslog.log stores the messages which kernel throws during booting. It shows hardware and respective driver detection.

In this case, even I am also clue less as to why X is not coming up at all. HP-UX 9 used to store logs in /usr/adm directory. Not sure about HP-UX 11. I would rather suggest you to remove the X server installation and re-install it on the machine.
# 16  
Old 12-30-2011
I find a file "rc.log" in /usr/adm

is this the log data you talk about??
Code:
Old /etc/rc.log moved to /etc/rc.log.old
**************************************************
HP-UX Start-up in progress
Thu Dec 29 09:56:41 2011
**************************************************
Configure system crash dumps
Output from "/sbin/rc1.d/S080crashconf start":
----------------------------
EXIT CODE: 0
VxVM device node check
Output from "/sbin/rc1.d/S091vxvm-nodes-check start":
----------------------------
VxVM general startup
Output from "/sbin/rc1.d/S092vxvm-startup start":
----------------------------
VxVM reconfiguration recovery
Output from "/sbin/rc1.d/S093vxvm-reconfig start":
----------------------------
Mount file systems
Output from "/sbin/rc1.d/S100localmount start":
----------------------------
checking quotas
Update kernel and loadable modules
Output from "/sbin/rc1.d/S110kmbuild start":
----------------------------
"/sbin/rc1.d/S110kmbuild start" SKIPPED
Initialize loadable modules
Output from "/sbin/rc1.d/S112kminit start":
----------------------------
       * All configured modules are registered successfully.
       * Module gvid_info is loaded successfully.
NOTE:    Module status
Name  ID Status  Type
=====================================================
krm             1       UNLOADED WSIO
gvid_info       2       LOADED  WSIO
drmfgl          3       UNLOADED Misc
drmfglrx        4       UNLOADED Misc
gvid_him_cons   5       UNLOADED Misc
Setting hostname
Output from "/sbin/rc1.d/S320hostname start":
----------------------------
Start Kernel Logging facility
Output from "/sbin/rc1.d/S350kl start":
----------------------------
"/sbin/rc1.d/S350kl start" SKIPPED
Set privilege group
Output from "/sbin/rc1.d/S400set_prvgrp start":
----------------------------
"/sbin/rc1.d/S400set_prvgrp start" SKIPPED
Display date
Output from "/sbin/rc1.d/S420set_date start":
----------------------------
"/sbin/rc1.d/S420set_date start" SKIPPED
Copy processor logs to /var/tombstones
Output from "/sbin/rc1.d/S430pdcinfo start":
----------------------------
Save system crash dump if needed
Output from "/sbin/rc1.d/S440savecrash start":
----------------------------
savecrash directory not set;  defaulting to: /var/adm/crash
EXIT CODE: 2 -  savecrash found no core dump to save
"/sbin/rc1.d/S440savecrash start" SKIPPED
Start evp
Output from "/sbin/rc1.d/S450evp.init start":
----------------------------
Enable auxiliary swap space
Output from "/sbin/rc1.d/S500swap_start start":
----------------------------
swap device(s) active
Start syncer daemon
Output from "/sbin/rc1.d/S520syncer start":
----------------------------
syncer started
Configure Loopback interfaces (lo0)
Output from "/sbin/rc2.d/S008net.init start":
----------------------------
Message catalog can't be opened/accessed for language ja_JP.SJIS.
Language C will used.
VxVM volume recovery start
Output from "/sbin/rc2.d/S096vxvm-recover start":
----------------------------
Configuring all unconfigured software filesets
Output from "/sbin/rc2.d/S120swconfig start":
----------------------------
       * Turning off all network based resolving services in
         '/etc/nsswitch.conf'
       * Removing the temporary '/etc/nsswitch.conf'.
Recover editor crash files
Output from "/sbin/rc2.d/S200clean_ex start":
----------------------------
preserving editor files (if any)
Clean UUCP
Output from "/sbin/rc2.d/S202clean_uucp start":
----------------------------
cleaning up uucp
List and/or clear temporary files
Output from "/sbin/rc2.d/S204clean_tmps start":
----------------------------
NOTE:  Files in /tmp:
total 85696
-rw-r--r--   1 root       root            30 Nov 15  2005 GEOLANG
-rw-r--r--   1 root       sys             69 Nov 15  2005 V2C-RUN_config.log
-rw-r--r--   1 root       sys            808 Nov 15  2005 X11_newfonts.log
-rw-rw-rw-   1 root       sys           4096 Nov 30  2005 a
-rw-rw-rw-   1 root       sys          30662 Nov 30  2005 b
-rw-r--r--   1 cx96       UNIX           107 Nov 23 06:41 cx96.errorlog
-rw-rw-r--   1 cx96       UNIX         41040 Aug 28  2009 cx96start
-rw-r--r--   1 root       root             0 Feb  1  2006 dhcpclient.log.old
prw-rw-rw-   1 root       root             0 Aug 22 15:27 dhcpfifo.any
prw-rw-rw-   1 root       root             0 Aug 22 15:27 dhcpfifo.root
drwxr-xr-x   4 root       sys             96 Nov 18  2005 drp.pkg
-rw-r--r--   1 root       sys            170 Nov 17  2005 dtappint.log
drwxrwxr-x   2 root       sys           8192 Nov 15  2005 howto
-rwxrwxrwx   1 root       sys        29198336 Nov 30  2005 hp11.img[1]
-rwxrwxrwx   1 root       sys        10289152 Nov 30  2005 hp11.img[1]-enware2
-r--r--r--   1 root       sys           1003 May 26  2007 install.vars
-rw-r--r--   1 root       sys              0 Nov 15  2005 kminstall-lock.
drwxr-xr-x   2 root       root            96 Nov 15  2005 lost+found
-rw-rw-rw-   1 cx96       UNIX           664 Apr  3  2009 m1
-rw-rw-rw-   1 cx96       UNIX         12048 Apr  3  2009 m2
-rw-rw-rw-   1 cx96       UNIX           495 Apr  3  2009 m3
-rw-r-----   1 root       sys         296960 Jun 13  2008 mptdriver.tar
-rw-r--r--   1 root       sys            332 Nov 18  2005 patch.log
srwxrwxrwx   1 root       root             0 Dec 29 07:59 portal
-rw-------   1 root       root           604 Dec 29 09:52 portmap.file
-rw-r--r--   1 root       sys             44 Nov 30  2005 prngd.log
-rw-r--r--   1 root       sys            107 Nov 24 11:15 root.errorlog
-rw-------   1 root       root          2196 Dec 29 09:52 rpcbind.file
-rw-r-----   1 root       sys         286720 May 26  2008 scsiU320-00_B.11.11.0803_HP-UX_B.11.11_64.depot
-rw-r--r--   1 root       sys             56 Nov 15  2005 sd_ipd_acl.1704
-rw-r--r--   1 root       root          2875 Dec 29 08:03 sensor_info
-r--r--r--   1 root       sys          11267 Nov 15  2005 services
-rw-r--r--   1 root       sys              0 Nov 15  2005 swlist
-rw-rw-rw-   1 root       sys         204800 Dec 13 10:10 syslog.tar
drwxrwxr-x   2 cx96       UNIX            96 Jul  6  2006 tool
-rw-r--r--   1 root       sys            166 Nov 15  2005 usb_ioscan2387.out
-rw-r--r--   1 root       sys            166 Nov 18  2005 usb_ioscan9566.out
-rw-r--r--   1 root       sys              0 Nov 15  2005 vxvm_swlist_output
-rw-r--r--   1 root       root       3314597 Dec 29 09:00 wd_action.dbg
NOTE:  Files in /var/tmp:
total 11216
-rw-r--r--   1 root       sys            255 Nov 30  2005 AAAa03698
-rw-r--r--   1 root       sys            572 Nov 30  2005 AAAa04671
drwxr-xr-x   3 root       sys             96 Nov 30  2005 CAAa03698
-rw-rw-r--   1 root       sys        5636811 Jun 20  2007 arch.include.1
-rw-rw-rw-   1 root       root         19364 Nov 15  2005 ems_index_file.data
drwxr-xr-x   2 root       sys             96 Nov 15  2005 hsperfdata_root
drwxrwxrwx   2 root       sys             96 Jun 20  2007 ign_configure
dr-xr-xr-x   2 bin        bin             96 Nov 15  2005 ntp
-r--r--r--   1 root       sys              0 Nov 18  2005 remove
drwxr-xr-x   4 root       root            96 Nov 18  2005 stm2380
drwxr-xr-x   4 root       root            96 Nov 29  2005 stm2418
-rw-r--r--   1 root       sys           5274 Jun 13  2008 swagent.log
-rw-rw-r--   1 root       sys            210 Jun 20  2007 tmp_cfg_file
-rw-rw-rw-   1 root       root           700 Nov 17  2005 triplet_index_file.data
-rw-rw-r--   1 root       sys            144 Jun 20  2007 vol.tmp
-rw-rw-rw-   1 root       root         24152 Nov 15  2005 xml_index_file.data
Clean up old log files
Output from "/sbin/rc2.d/S206clean_adm start":
----------------------------
Start system message logging daemon
Output from "/sbin/rc2.d/S220syslogd start":
----------------------------
System message logger started
Start pty allocator daemon
Output from "/sbin/rc2.d/S230ptydaemon start":
----------------------------
Starting the ptydaemon
Configuring OLA/R interface
Output from "/sbin/rc2.d/S290pci_olar start":
----------------------------
Creating OLA/R device node at major 5...
Note that this system must have OLA/R capable hardware
and firmware for these features to be enabled.
OLA/R capabilities not supported on this platform
"/sbin/rc2.d/S290pci_olar start" SKIPPED
Start network tracing and logging daemon
Output from "/sbin/rc2.d/S300nettl start":
----------------------------
Initializing Network Tracing and Logging...
Done. 
Configure HP igelan Gigabit Ethernet interfaces
Output from "/sbin/rc2.d/S305hpigelan start":
----------------------------
Configure HP iether Gigabit Ethernet interfaces
Output from "/sbin/rc2.d/S306hpiether start":
----------------------------
Configure HP Gigabit Ethernet interfaces
Output from "/sbin/rc2.d/S308hpgelan start":
----------------------------
Configure HP Ethernet interfaces
Output from "/sbin/rc2.d/S320hpether start":
----------------------------
Create PCI FDDI device files.
Output from "/sbin/rc2.d/S329hppcifddi start":
----------------------------
Configure HP 100BASE-T interfaces
Output from "/sbin/rc2.d/S333hpbtlan start":
----------------------------
No 100BASE-T device configured in system (btlan)
"/sbin/rc2.d/S333hpbtlan start" SKIPPED
Configure VLAN interfaces
Output from "/sbin/rc2.d/S337vlan start":
----------------------------
Configure LAN interfaces
Output from "/sbin/rc2.d/S340net start":
----------------------------
Start name server daemon
Output from "/sbin/rc2.d/S370named start":
----------------------------
"/sbin/rc2.d/S370named start" SKIPPED
Start NFS core subsystem
Output from "/sbin/rc2.d/S400nfs.core start":
----------------------------
    starting NFS CORE networking
    
    starting up the rpcbind
 /usr/sbin/rpcbind
    starting up the nfskd daemon
 /usr/sbin/nfskd
Start NIS+ server subsystem
Output from "/sbin/rc2.d/S406nisplus.server start":
----------------------------
NOTE: NISPLUS_SERVER is not set, exiting.
Start NIS+ client subsystem
Output from "/sbin/rc2.d/S408nisplus.client start":
----------------------------
NOTE: NISPLUS_CLIENT is not set, exiting.
Start NIS server subsystem
Output from "/sbin/rc2.d/S410nis.server start":
----------------------------
NOTE: NIS_MASTER_SERVER or NIS_SLAVE_SERVER is not set, exiting.
Start NIS client subsystem
Output from "/sbin/rc2.d/S420nis.client start":
----------------------------
NOTE: NIS_CLIENT is not set, exiting.
Start NFS client subsystem
Output from "/sbin/rc2.d/S430nfs.client start":
----------------------------
    starting NFS CLIENT networking
    
    starting up the rpcbind
 rpcbind already started, using pid: 977
    starting up the BIO daemons
 /usr/sbin/biod 16
    starting up the Status Monitor daemon
 /usr/sbin/rpc.statd 
    starting up the Lock Manager daemon
 /usr/sbin/rpc.lockd 
    starting up the AutoFS daemon
 /usr/lib/netsvc/fs/autofs/automountd  
  Running the AutoFS command interface
  /usr/sbin/automount  
    mounting remote NFS file systems ...
    mounting CacheFS file systems ...
Start the Trusted Mode with NIS+ subsystem
Output from "/sbin/rc2.d/S440comsec start":
----------------------------
    starting the Trusted Table Sync Daemon (ttsyncd)
 Not an NIS+ root or master server
"/sbin/rc2.d/S440comsec start" SKIPPED
Configure pseudo devices for MAC/LLA access
Output from "/sbin/rc2.d/S462maclan start":
----------------------------
Start multicast routing daemon
Output from "/sbin/rc2.d/S490mrouted start":
----------------------------
"/sbin/rc2.d/S490mrouted start" SKIPPED
Start Internet services daemon
Output from "/sbin/rc2.d/S500inetd start":
----------------------------
Internet Services started
Start dynamic routing daemon
Output from "/sbin/rc2.d/S510gated start":
----------------------------
"/sbin/rc2.d/S510gated start" SKIPPED
Start router discover protocol daemon
Output from "/sbin/rc2.d/S520rdpd start":
----------------------------
"/sbin/rc2.d/S520rdpd start" SKIPPED
Configuring PPP Interface
Output from "/sbin/rc2.d/S522ppp start":
----------------------------
Creating 16 tunnel device nodes at major 31...
Start RARP protocol daemon
Output from "/sbin/rc2.d/S525rarpd start":
----------------------------
"/sbin/rc2.d/S525rarpd start" SKIPPED
Start remote system status daemon
Output from "/sbin/rc2.d/S530rwhod start":
----------------------------
"/sbin/rc2.d/S530rwhod start" SKIPPED
Configuring man pages for Internet Services
Output from "/sbin/rc2.d/S535inetsvcs start":
----------------------------
Starting mail daemon
Output from "/sbin/rc2.d/S540sendmail start":
----------------------------
WARNING: local host name (thp44186) is not qualified; fix $j in config file
/etc/mail/aliases: 7 aliases, longest 9 bytes, 88 bytes total
sendmail
Starting outbound connection daemons for DDFA software
Output from "/sbin/rc2.d/S550ddfa start":
----------------------------
"/sbin/rc2.d/S550ddfa start" SKIPPED
Starting Digi RealPort daemons
Output from "/sbin/rc2.d/S555drp.daemon start":
----------------------------
Start SNMP Master Network Management daemon
Output from "/sbin/rc2.d/S560SnmpMaster start":
----------------------------
Start OSPF MIB Network Management subAgent
Output from "/sbin/rc2.d/S565OspfMib start":
----------------------------
"/sbin/rc2.d/S565OspfMib start" SKIPPED
Start SNMP HP-UNIX Network Management subAgent
Output from "/sbin/rc2.d/S565SnmpHpunix start":
----------------------------
Start SNMP MIB-2 Network Management subAgent
Output from "/sbin/rc2.d/S565SnmpMib2 start":
----------------------------
Start SNMP Trap Dest Network Management subAgent
Output from "/sbin/rc2.d/S565SnmpTrpDst start":
----------------------------
Start DCE daemons
Output from "/sbin/rc2.d/S570dce start":
----------------------------
Beginning DCE startup...
NOTE: No components of DCE are configured.
Finished DCE startup.
"/sbin/rc2.d/S570dce start" SKIPPED
Start SNMP PCI FDDI Network Management subAgent
Output from "/sbin/rc2.d/S576SnmpFddi4 start":
----------------------------
Start RPC daemon if needed
Output from "/sbin/rc2.d/S590Rpcd start":
----------------------------
    starting the DCE RPC Daemon
 /opt/dce/sbin/rpcd
Start CIM cimserver subsystem
Output from "/sbin/rc2.d/S600cimserver start":
----------------------------
CIM cimserver started
Start Isogon License Server Daemon
Output from "/sbin/rc2.d/S600iforls start":
----------------------------
"/sbin/rc2.d/S600iforls start" SKIPPED
Initialize capacity on demand
Output from "/sbin/rc2.d/S602icod start":
----------------------------
"/sbin/rc2.d/S602icod start" SKIPPED
Starting ISEE hpservices mad daemon.
Output from "/sbin/rc2.d/S605hpservices start":
----------------------------
NOTE:    hpservices not configured for startup
"/sbin/rc2.d/S605hpservices start" SKIPPED
Start remote boot daemon
Output from "/sbin/rc2.d/S610rbootd start":
----------------------------
Remote boot daemon started
Starting X Font Server at TCP port 7000
Output from "/sbin/rc2.d/S620xfs start":
----------------------------
"/sbin/rc2.d/S620xfs start" SKIPPED
Start vt daemon
Output from "/sbin/rc2.d/S630vt start":
----------------------------
"/sbin/rc2.d/S630vt start" SKIPPED
Starting kks daemon
Output from "/sbin/rc2.d/S640kks start":
----------------------------
Starting HP EGConvert daemon
Output from "/sbin/rc2.d/S642egcd start":
----------------------------
Starting VJE-r daemon
Output from "/sbin/rc2.d/S644vjed start":
----------------------------
Starting UDC server
Output from "/sbin/rc2.d/S648eus start":
----------------------------
vjed(Version 2.0) on XWINDOWS(XIMP)
Copyright (C) 1992 by VACS Corporation.
OS TYPE: unix, DATE: Feb/10/1993
"/sbin/rc2.d/S648eus start" SKIPPED
Start time synchronization
Output from "/sbin/rc2.d/S660xntpd start":
----------------------------
"/sbin/rc2.d/S660xntpd start" SKIPPED
Start accounting
Output from "/sbin/rc2.d/S700acct start":
----------------------------
"/sbin/rc2.d/S700acct start" SKIPPED
Install/Load XF86 DLKM Helper Modules
Output from "/sbin/rc2.d/S700xf86 start":
----------------------------
Starting the password/group assist subsystem
Output from "/sbin/rc2.d/S705pwgr start":
----------------------------
pwgrd started
Starting HP Disk Array Manager daemons.
Output from "/sbin/rc2.d/S710hparamgr start":
----------------------------
Starting disk array monitor daemons.
Output from "/sbin/rc2.d/S710hparray start":
----------------------------
Start print spooler
Output from "/sbin/rc2.d/S720lp start":
----------------------------
??
line printer scheduler started
Starting HP Distributed Print Service
Output from "/sbin/rc2.d/S722pd start":
----------------------------
Start clock daemon
Output from "/sbin/rc2.d/S730cron start":
----------------------------
cron started
Start diagnostic subsystem
Output from "/sbin/rc2.d/S742diagnostic start":
----------------------------
Start auditing subsystem
Output from "/sbin/rc2.d/S760auditing start":
----------------------------
"/sbin/rc2.d/S760auditing start" SKIPPED
Start audio server daemon
Output from "/sbin/rc2.d/S770audio start":
----------------------------
"/sbin/rc2.d/S770audio start" SKIPPED
Start Distributed Single Logical Screen daemon
Output from "/sbin/rc2.d/S780slsd start":
----------------------------
"/sbin/rc2.d/S780slsd start" SKIPPED
Start USB hub daemon
Output from "/sbin/rc2.d/S785hub start":
----------------------------
SAM System administration configuration
Output from "/sbin/rc2.d/S800spa start":
----------------------------
Starting ObAM Application Server
Output from "/sbin/rc2.d/S860webadmin start":
----------------------------
"/sbin/rc2.d/S860webadmin start" SKIPPED
Initialize Software Distributor agent daemon
Output from "/sbin/rc2.d/S870swagentd start":
----------------------------
Starting servicecontrol manager daemons
Output from "/sbin/rc2.d/S890ServCtlMgr start":
----------------------------
Starting CIFS Client
Output from "/sbin/rc2.d/S900cifsclient start":
----------------------------
"/sbin/rc2.d/S900cifsclient start" SKIPPED
Configure HP RAID SA interfaces
Output from "/sbin/rc2.d/S900ciss start":
----------------------------
No RAID SA Adapters installed.
"/sbin/rc2.d/S900ciss start" SKIPPED
Copy processor logs to /var/tombstones
Output from "/sbin/rc2.d/S900cpumap2 start":
----------------------------
'/sbin/init.d/cpumap2 background' started in the background, pid=2452
Starting Event Monitoring Service
Output from "/sbin/rc2.d/S900ems start":
----------------------------
Starting the EMS Persistence Client
Start EMS SNMP subagent
Output from "/sbin/rc2.d/S900emsa start":
----------------------------
Configure HP Fibre Channel Mass Storage interfaces
Output from "/sbin/rc2.d/S900hpfcms start":
----------------------------
Configure HP Internal RAID interfaces
Output from "/sbin/rc2.d/S900i2o_raid start":
----------------------------
No Internal RAID Adapters installed.
"/sbin/rc2.d/S900i2o_raid start" SKIPPED
Configuring Ultra320 SCSI Mass Storage interfaces
Output from "/sbin/rc2.d/S900mpt start":
----------------------------
Starting SAMBA Server
Output from "/sbin/rc2.d/S900samba start":
----------------------------
"/sbin/rc2.d/S900samba start" SKIPPED
Starting the RST EMS listener
Output from "/sbin/rc2.d/S910rstEMSlistener start":
----------------------------
"/sbin/rc2.d/S910rstEMSlistener start" SKIPPED
Running /etc/conf/digi/drp-boot.sh
Output from "/sbin/rc2.d/S940drp.ditty start":
----------------------------
"/sbin/rc2.d/S940drp.ditty start" SKIPPED
Configure HP Fibre Channel Tachyon TL/TS Mass Storage interf
Output from "/sbin/rc2.d/S989fc_td start":
----------------------------
Configuring HP Fibre Channel FCD Mass Storage interfaces
Output from "/sbin/rc2.d/S990fc_fcd start":
----------------------------
VVR - Starting Communication Daemon
Output from "/sbin/rc2.d/S994vxnm-vxnetd start":
----------------------------
No VVR license installed on the system - vxnetd not started
"/sbin/rc2.d/S994vxnm-vxnetd start" SKIPPED
VVR - Starting VRAS daemon
Output from "/sbin/rc2.d/S996vradmind start":
----------------------------
  No VVR license installed on the system; vradmind not started.
"/sbin/rc2.d/S996vradmind start" SKIPPED
VVR - Starting VxRSync daemon
Output from "/sbin/rc2.d/S996vxrsyncd start":
----------------------------
  No VVR license installed on the system; in.vxrsyncd not started.
"/sbin/rc2.d/S996vxrsyncd start" SKIPPED
Starting VERITAS Enterprise Administrator Service (vxsvc)
Output from "/sbin/rc2.d/S999isisd start":
----------------------------
Start NFS server subsystem
Output from "/sbin/rc3.d/S100nfs.server start":
----------------------------
    starting NFS SERVER networking
    
    starting up the rpcbind daemon
 rpcbind already started, using pid: 977
    starting up the mount daemon
 /usr/sbin/rpc.mountd 
    starting up the NFS daemons
 /usr/sbin/nfsd 30
    starting up the Status Monitor daemon
 rpc.statd already started, using pid: 1054
    starting up the Lock Manager daemon
 rpc.lockd already started, using pid: 1060
Start X print server(s)
Output from "/sbin/rc3.d/S200tps.rc start":
----------------------------
"/sbin/rc3.d/S200tps.rc start" SKIPPED
Starting HP-UX Apache-based Web Server
Output from "/sbin/rc3.d/S823hpws_apache start":
----------------------------
"/sbin/rc3.d/S823hpws_apache start" SKIPPED
Starting HP-UX Tomcat-based Servlet Engine
Output from "/sbin/rc3.d/S823hpws_tomcat start":
----------------------------
"/sbin/rc3.d/S823hpws_tomcat start" SKIPPED
Starting HP-UX Webmin-based Admin
Output from "/sbin/rc3.d/S823hpws_webmin start":
----------------------------
"/sbin/rc3.d/S823hpws_webmin start" SKIPPED
Starting the HPUX Webproxy subsystem
Output from "/sbin/rc3.d/S823hpws_webproxy start":
----------------------------
"/sbin/rc3.d/S823hpws_webproxy start" SKIPPED
Starting HP-UX XML Web Server Tools
Output from "/sbin/rc3.d/S823hpws_xmltools start":
----------------------------
Start CDE login server
Output from "/sbin/rc3.d/S990dtlogin.rc start":
----------------------------
Starting PRNGD (Pseudo Random Number Generator Daemon)
Output from "/sbin/rc3.d/S99prngd.rc start":
----------------------------
"/sbin/rc3.d/S99prngd.rc start" SKIPPED
**************************************************
HP-UX run-level transition completed
Thu Dec 29 09:57:41 2011
**************************************************

Last edited by Scott; 12-31-2011 at 11:37 AM.. Reason: Please start using code tags...
# 17  
Old 12-31-2011
You seem to have something wrong with your network profile...
Most of started in level 2 in relation with network are skipped, are they unconfigured?
Until you solved that issue I dont see how you will get X working...
I have seen cases where there were IP mismatch between DNS and /etc/hosts bring servers into severe issues... you are not in such case...

What do you have in /var/adm/syslog/syslog.log? and in OLDsyslog.log?
Last edited by vbe; 12-31-2011 at 11:37 AM.. Reason: thoughts have changed...
# 18  
Old 12-31-2011
rc.log shows the output produced during starting of serviced configured for the run level. If it's a graphics driver problem, that will not show up in rc.log. Rather, it would show up in syslog.log file produced by kernel.

Can you post the content of syslog.log? Well, I don't know what kind of work you do on the workstation. But, if it's not something related to graphics, you can do a whole bunch of stuffs using console (way more than what you can do with CDE). Who needs all those fancy windows when you have a working shell!! Smilie
# 19  
Old 12-31-2011
One way to know what is going on is to try to connect remotely using XDMCP, if it works, then Xserver is started... and so its a configuration issue...
# 20  
Old 02-08-2012
finally! the X-window is work!!!

a collegue of my company help me to figure out the promblem.

tail /etc/dt/config/Xservers
#108
# * Local local@console /usr/bin/X11 :0
should be
* Local local@console /usr/bin/X11 :0
"#" have to remove if the computer have graphic card

the system is back to work now
thank you guys been so kind to help me before!


[IMG]file:///C:/DOCUME%7E1/00022862/LOCALS%7E1/Temp/moz-screenshot-1.png[/IMG]
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Splitting week start date and end date based on custom period start dates

Below are my custom period start and end dates based on a calender, these dates are placed in a file, for each period i need to split into three weeks for each period row, example is given below. Could you please help out to achieve solution through shell script.. File content: ... (2 Replies)
Discussion started by: nani2019
2 Replies

2. UNIX for Beginners Questions & Answers

Toggle between xterm window and standard terminal window

Is it possible to toggle back and forth between an xterm invoked from one tty, and a shell invoked from a different tty? I am running Centos 7 with KDE and booting in non-graphic mode. After logging in on the default window (/dev/tty1) , I can then use ALT-F2 to access a new window (/dev/tty2),... (1 Reply)
Discussion started by: rhgscty
1 Replies

3. IP Networking

TCP initial congestion window (slow-start)

I have noticed that the initial congestion window in my traces is 8920bytes~=6*1448. rfc3390 states the initial cwand should be max 4000 bytes(around 3*1448). At first i thought it might be because i'm running my server on mac os x, so apple might have modified the tcp stack. Therefore I tried... (2 Replies)
Discussion started by: ddayan
2 Replies

4. Red Hat

Maximizing X window without Window Switcher

Hi everyone! I have a strange situation. I'm running an NX remote Gnome desktop session. On the remote machine, there is a whole load of unsaved data in a window. A problem that I've been having with this NX session is that I can't load Gnome Applets, including the Window Switcher. So.. when I... (0 Replies)
Discussion started by: alexandicity
0 Replies

5. Shell Programming and Scripting

Start program in background (or start crontab ahead of time)

Hey! I'm working on a script that will add a user, create some configfiles, and add a crontab for the user. The crontab looks like the following: @reboot /home/user/program config.conf & I would like for this process to start at the end of my script under the corresponding username by... (0 Replies)
Discussion started by: noratx
0 Replies

6. AIX

Q: how to start a service when system start

As topic, assume we have a service called "blahservice" and we can start it by: startsrc -s blahservice what is the best practice to run such command when system start? - directly use mkitab to add it into /etc/inittab or - drop startup scripts in /etc/rc.d/rcX.d I know they... (4 Replies)
Discussion started by: acerlinux
4 Replies

7. Linux

where to put an application if i want to start it on start up

hi i want to know the way by which i put any file somewhere and it get s started when the system restarts or bots i mean whenever my system starts that application must also start thanks (3 Replies)
Discussion started by: shukla_chanchal
3 Replies

8. HP-UX

how to start the x window system

hi, am new to hp-ux, i just bought an hp-ux with the hp-ux 11.0 os, is very old, and i wnat to start the x window system but it send an error that said that couldn't open the x server, i try startx, xinit, and nothing, and also where i can find tutorials for hp-ux os for beginners (7 Replies)
Discussion started by: nobody
7 Replies

9. Windows & DOS: Issues & Discussions

window 2000 professional not pinging my window 98 system.

Hello, We someone help me resolve this problem. I have window 2000 professional, windows 98 and Unixware 7.0.1 on the network. I was able to establish connection with all. However, l was unable to ping window 98 from window 2000 professional. I was able to ping the window 2000 from the window... (10 Replies)
Discussion started by: kayode
10 Replies

10. UNIX for Dummies Questions & Answers

How do I start a program when I start my Computer?

I'm running MAC OS X and I'm wondering how I start 'nixey programs (not normal apps) on startup? Things like the dnet client and hxd Hotline Server. Anyone know? (1 Reply)
Discussion started by: l008com
1 Replies
Login or Register to Ask a Question