I wanted to install SCO Openserver 6.0.0 on this system Intel Server System SR2625UR - Overview
The problem was that the installation routine requested input from the keyboard before loading the USB keyboard driver.
I resolved the issue by:
Building a simple desktop system with an IDE... (2 Replies)
Greetings Forumers-
My apologies in advance if this post is incorrectly placed as I did not see a sub-forum to post hardware questions. :o
Here's my situation:
I have received a Sun Blade 6048 Rack and need to configure the power for the rack. In reading the Site Planning Guide for Sun... (4 Replies)
There's a user that opens various login sessions with a particular SOLARIS server at the same time - this locks the server thats tried to get logged into..
Kindly help on how to know the max limit of sessions a particular user can open with a particular server at the same time. AND, how to... (3 Replies)
There's a user that opens various login sessions with a particular SOLARIS server at the same time - this locks the server thats tried to get logged into..
Kindly help on how to know the max limit of sessions a particular user can open with a particular server at the same time. AND, how to... (1 Reply)
There's a user that opens various login sessions with a particular SOLARIS server at the same time - this locks the server thats tried to get logged into..
Kindly help on how to know the max limit of sessions a particular user can open with a particular server at the same time. AND, how to... (1 Reply)
Greetings to all:
Gentlemen, I've tried extremely hard to hookup my notebook via the hyperterminal to my AIX box (IBM 7046-B50) by virtue of a cross-over cable. Don't know really whats going on ......to my surprise. The notebook says its hookedup successfully but shows no unix login prompt on... (6 Replies)
IBROUTERS(8) OpenIB Diagnostics IBROUTERS(8)NAME
IBROUTERS - show InfiniBand router nodes in topology
SYNOPSIS
ibrouters [options] [<topology-file>]
DESCRIPTION
ibrouters is a script which either walks the IB subnet topology or uses an already saved topology file and extracts the router nodes.
OPTIONS -C, --Ca <ca_name> use the specified ca_name.
-P, --Port <ca_port> use the specified ca_port.
-t, --timeout <timeout_ms> override the default timeout for the solicited mads.
-h, --help show the usage message
--config, -z <config_file> Specify alternate config file.
Default: /etc/infiniband-diags/ibdiag.conf
Local port Selection
Multiple port/Multiple CA support: when no IB device or port is specified (see the "local umad parameters" below), the libibumad library
selects the port to use by the following criteria:
1. the first port that is ACTIVE.
2. if not found, the first port that is UP (physical link up).
If a port and/or CA name is specified, the libibumad library attempts to fulfill the user request, and will fail if it is not possible.
For example:
ibaddr # use the first port (criteria #1 above)
ibaddr -C mthca1 # pick the best port from "mthca1" only.
ibaddr -P 2 # use the second (active/up) port from the first available IB device.
ibaddr -C mthca0 -P 2 # use the specified port only.
FILES
CONFIG FILE
/etc/infiniband-diags/ibdiag.conf
A global config file is provided to set some of the common options for all tools. See supplied config file for details.
NODE NAME MAP FILE FORMAT
The node name map is used to specify user friendly names for nodes in the output. GUIDs are used to perform the lookup.
This functionality is provided by the opensm-libs package. See opensm(8) for the file location for your installation.
Generically:
# comment
<guid> "<name>"
Example:
# IB1
# Line cards
0x0008f104003f125c "IB1 (Rack 11 slot 1 ) ISR9288/ISR9096 Voltaire sLB-24D"
0x0008f104003f125d "IB1 (Rack 11 slot 1 ) ISR9288/ISR9096 Voltaire sLB-24D"
0x0008f104003f10d2 "IB1 (Rack 11 slot 2 ) ISR9288/ISR9096 Voltaire sLB-24D"
0x0008f104003f10d3 "IB1 (Rack 11 slot 2 ) ISR9288/ISR9096 Voltaire sLB-24D"
0x0008f104003f10bf "IB1 (Rack 11 slot 12 ) ISR9288/ISR9096 Voltaire sLB-24D"
# Spines
0x0008f10400400e2d "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB-12D"
0x0008f10400400e2e "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB-12D"
0x0008f10400400e2f "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB-12D"
0x0008f10400400e31 "IB1 (Rack 11 spine 2 ) ISR9288 Voltaire sFB-12D"
0x0008f10400400e32 "IB1 (Rack 11 spine 2 ) ISR9288 Voltaire sFB-12D"
# GUID Node Name
0x0008f10400411a08 "SW1 (Rack 3) ISR9024 Voltaire 9024D"
0x0008f10400411a28 "SW2 (Rack 3) ISR9024 Voltaire 9024D"
0x0008f10400411a34 "SW3 (Rack 3) ISR9024 Voltaire 9024D"
0x0008f104004119d0 "SW4 (Rack 3) ISR9024 Voltaire 9024D"
SEE ALSO ibnetdiscover(8)DEPENDENCIES
ibnetdiscover, ibnetdiscover format
AUTHOR
Hal Rosenstock
< halr@voltaire.com >
IBROUTERS(8)