I wanted to install SCO Openserver 6.0.0 on this system Intel Server System SR2625UR - Overview
The problem was that the installation routine requested input from the keyboard before loading the USB keyboard driver.
I resolved the issue by:
Building a simple desktop system with an IDE... (2 Replies)
Greetings Forumers-
My apologies in advance if this post is incorrectly placed as I did not see a sub-forum to post hardware questions. :o
Here's my situation:
I have received a Sun Blade 6048 Rack and need to configure the power for the rack. In reading the Site Planning Guide for Sun... (4 Replies)
There's a user that opens various login sessions with a particular SOLARIS server at the same time - this locks the server thats tried to get logged into..
Kindly help on how to know the max limit of sessions a particular user can open with a particular server at the same time. AND, how to... (3 Replies)
There's a user that opens various login sessions with a particular SOLARIS server at the same time - this locks the server thats tried to get logged into..
Kindly help on how to know the max limit of sessions a particular user can open with a particular server at the same time. AND, how to... (1 Reply)
There's a user that opens various login sessions with a particular SOLARIS server at the same time - this locks the server thats tried to get logged into..
Kindly help on how to know the max limit of sessions a particular user can open with a particular server at the same time. AND, how to... (1 Reply)
Greetings to all:
Gentlemen, I've tried extremely hard to hookup my notebook via the hyperterminal to my AIX box (IBM 7046-B50) by virtue of a cross-over cable. Don't know really whats going on ......to my surprise. The notebook says its hookedup successfully but shows no unix login prompt on... (6 Replies)
JACK-RACK(1) General Commands Manual JACK-RACK(1)NAME
jack-rack - a LADSPA effects rack
SYNOPSIS
jack-rack [options] files...
DESCRIPTION
This manual page documents briefly the jack-rack command. This manual page was written for the Debian distribution because the original
program does not have a manual page.
The jack-rack program allows you to load several LADSPA plugins and stack them together in order to build a virtual effects box.
OPTIONS
This program follows the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included
below.
-h, --help
Display this help info
-p, --pid-name
Use the pid in the JACK client name (default)
-s, --string-name
Use <string> in the JACK client name
-n, --name
Use just jack_rack as the client name
-i, --input
Connected inputs to the first two physical capture ports
-o, --output
Connected outputs to the first two physical playback ports
-c, --channels <int>
How many input and output channels the rack should use (default: 2)
-D, --tmpdir <dir>
Tell JACK to use <dir> for its temporary files
SEE ALSO jackd(1),
AUTHOR
This manual page was written by Guenter Geiger <geiger@debian.org>, for the Debian GNU/Linux system (but may be used by others).
June 6, 2003 JACK-RACK(1)
