HP�s ProLiant DL120 G5 SATA Rack Server

3 More Discussions You Might Find Interesting

1. Hardware

Connect SATA Laptop HardDrive to Desktop SATA Slots

Hello everybody, I need to connect a laptop 2.5 SATA hard drive to a Desktop board (which uses 3.5' SATA hard drives). I've tried the connectors and they fit excellent in the 2.5 SATA connectors. The problem is that the laptop hard drive uses 5v and the PC's power source sends 12v. So, my...

2. UNIX for Advanced & Expert Users

trying to setup a sata drive using a sata to scsi adaptor

trying to setup a sata drive using a sata to scsi adaptor I have a sata 1TB Deskstar that I had setup before and during shipment from a facilty to another, the disk failed. The handling was not great, lots of throwing boxes, etc. I have a new disk from Hitachi (thankyou Hitachi) anyway, I don't...

3. Red Hat

Installation problem in HP Proliant DL-380 G5 server

Dear Sir, I have one HP Proliant DL-380 G5 Server, i tried to install Redhat Enterprise Verison 4, when i am trying to install the linux operating system it is coming one error message your hard disk not found, we are using Serial Scsi harddisk 146 GB, array controller is p400. i would...

LEARN ABOUT CENTOS

ibfindnodesusing

IBFINDNODESUSING(8)						Open IB Diagnostics					       IBFINDNODESUSING(8)

NAME

       IBFINDNODESUSING -

find a list of end nodes which are routed through the specified switch and port
   SYNOPSIS
       ibfindnodesusing.pl [options] <switch_guid|switch_name> <port>

   DESCRIPTION
       ibfindnodesusing.pl uses ibroute and detects the current nodes which are routed through both directions of the link specified.  The link is
       specified by one switch port end; the script finds the remote end automatically.

   OPTIONS
       -h

	      show help

       -R

	      Recalculate the ibnetdiscover information, ie do not use the cached information.	This option is slower but should be  used  if  the
	      diag tools have not been used for some time or if there are other reasons to believe that the fabric has changed.

       -C <ca_name>    use the specified ca_name.

       -P <ca_port>    use the specified ca_port.

   FILES
   CONFIG FILE
       /etc/infiniband-diags/ibdiag.conf

       A global config file is provided to set some of the common options for all tools.  See supplied config file for details.

   NODE NAME MAP FILE FORMAT
       The node name map is used to specify user friendly names for nodes in the output.  GUIDs are used to perform the lookup.

       This functionality is provided by the opensm-libs package.  See opensm(8) for the file location for your installation.

       Generically:

       # comment
       <guid> "<name>"

       Example:

       # IB1
       # Line cards
       0x0008f104003f125c "IB1 (Rack 11 slot 1	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f125d "IB1 (Rack 11 slot 1	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f10d2 "IB1 (Rack 11 slot 2	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f10d3 "IB1 (Rack 11 slot 2	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f10bf "IB1 (Rack 11 slot 12  ) ISR9288/ISR9096 Voltaire sLB-24D"

       # Spines
       0x0008f10400400e2d "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e2e "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e2f "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e31 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e32 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"

       # GUID	Node Name
       0x0008f10400411a08 "SW1	(Rack  3) ISR9024 Voltaire 9024D"
       0x0008f10400411a28 "SW2	(Rack  3) ISR9024 Voltaire 9024D"
       0x0008f10400411a34 "SW3	(Rack  3) ISR9024 Voltaire 9024D"
       0x0008f104004119d0 "SW4	(Rack  3) ISR9024 Voltaire 9024D"

   AUTHOR
       Ira Weiny
	      < ira.weiny@intel.com >

															       IBFINDNODESUSING(8)

HP Server News and Podcasts RSS