HP�s ProLiant DL120 G5 SATA Rack Server

3 More Discussions You Might Find Interesting

1. Hardware

Connect SATA Laptop HardDrive to Desktop SATA Slots

Hello everybody, I need to connect a laptop 2.5 SATA hard drive to a Desktop board (which uses 3.5' SATA hard drives). I've tried the connectors and they fit excellent in the 2.5 SATA connectors. The problem is that the laptop hard drive uses 5v and the PC's power source sends 12v. So, my...

2. UNIX for Advanced & Expert Users

trying to setup a sata drive using a sata to scsi adaptor

trying to setup a sata drive using a sata to scsi adaptor I have a sata 1TB Deskstar that I had setup before and during shipment from a facilty to another, the disk failed. The handling was not great, lots of throwing boxes, etc. I have a new disk from Hitachi (thankyou Hitachi) anyway, I don't...

3. Red Hat

Installation problem in HP Proliant DL-380 G5 server

Dear Sir, I have one HP Proliant DL-380 G5 Server, i tried to install Redhat Enterprise Verison 4, when i am trying to install the linux operating system it is coming one error message your hard disk not found, we are using Serial Scsi harddisk 146 GB, array controller is p400. i would...

LEARN ABOUT CENTOS

ibrouters

IBROUTERS(8)							OpenIB Diagnostics						      IBROUTERS(8)

NAME

       IBROUTERS - show InfiniBand router nodes in topology

SYNOPSIS

       ibrouters [options] [<topology-file>]

DESCRIPTION

       ibrouters is a script which either walks the IB subnet topology or uses an already saved topology file and extracts the router nodes.

OPTIONS

       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

       -t, --timeout <timeout_ms> override the default timeout for the solicited mads.

       -h, --help      show the usage message

       --config, -z  <config_file> Specify alternate config file.

	  Default: /etc/infiniband-diags/ibdiag.conf

   Local port Selection
       Multiple  port/Multiple	CA  support: when no IB device or port is specified (see the "local umad parameters" below), the libibumad library
       selects the port to use by the following criteria:

	  1. the first port that is ACTIVE.

	  2. if not found, the first port that is UP (physical link up).

	  If a port and/or CA name is specified, the libibumad library attempts to fulfill the user request, and will fail if it is not possible.

	  For example:

	  ibaddr		 # use the first port (criteria #1 above)
	  ibaddr -C mthca1	 # pick the best port from "mthca1" only.
	  ibaddr -P 2		 # use the second (active/up) port from the first available IB device.
	  ibaddr -C mthca0 -P 2  # use the specified port only.

FILES

   CONFIG FILE
       /etc/infiniband-diags/ibdiag.conf

       A global config file is provided to set some of the common options for all tools.  See supplied config file for details.

   NODE NAME MAP FILE FORMAT
       The node name map is used to specify user friendly names for nodes in the output.  GUIDs are used to perform the lookup.

       This functionality is provided by the opensm-libs package.  See opensm(8) for the file location for your installation.

       Generically:

       # comment
       <guid> "<name>"

       Example:

       # IB1
       # Line cards
       0x0008f104003f125c "IB1 (Rack 11 slot 1	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f125d "IB1 (Rack 11 slot 1	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f10d2 "IB1 (Rack 11 slot 2	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f10d3 "IB1 (Rack 11 slot 2	 ) ISR9288/ISR9096 Voltaire sLB-24D"
       0x0008f104003f10bf "IB1 (Rack 11 slot 12  ) ISR9288/ISR9096 Voltaire sLB-24D"

       # Spines
       0x0008f10400400e2d "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e2e "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e2f "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e31 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"
       0x0008f10400400e32 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"

       # GUID	Node Name
       0x0008f10400411a08 "SW1	(Rack  3) ISR9024 Voltaire 9024D"
       0x0008f10400411a28 "SW2	(Rack  3) ISR9024 Voltaire 9024D"
       0x0008f10400411a34 "SW3	(Rack  3) ISR9024 Voltaire 9024D"
       0x0008f104004119d0 "SW4	(Rack  3) ISR9024 Voltaire 9024D"

SEE ALSO

       ibnetdiscover(8)

DEPENDENCIES

       ibnetdiscover, ibnetdiscover format

AUTHOR

       Hal Rosenstock
	      < halr@voltaire.com >

																      IBROUTERS(8)

HP Server News and Podcasts RSS