How to identify virtual/physic disk path on X4100?
Hello,
Currently we have a Oracle X4100 ( Solaris 10 ) server with disk failure. Originally our hardware team thought the disk can be hot-swap, when they stood in front of the server, none of the disk failure LED were on, so now we have no idea which disk is the bad one for replacement.
As we remember that although OS is seeing c2t2d0 is the bad disk originally, but it doesn't mean it's the physical disk which is failing.
Therefore, we need some advice how to identify the real failed disk for replacement.
( Note: originally only c2t2d0 shows hardware error in iostat, now is including c2t3d0, "format" is completely hung, "raidctl -l" will show 0.2.0 and hung ... without continuing )
Since "raidctl -l -g 0.3.0 2" hungs here, does it mean we actually have a bad disk at c2t3d0?
Anyway to confirm which disk is the bad disk?
Thank you very much,
SC
Last edited by DukeNuke2; 02-08-2013 at 04:28 AM..
I am working on VM host and collecting data to identify the type of storage attached to the server which will be migrated to VNX.
it has one ldom created on it
luxadm probe output ---
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node... (7 Replies)
I have a small script to send copies of files to another computer used for tests but in the same location:pwd=`pwd`
for i in "$@"
do
echo "rcp -p $i comp-2:$pwd/$i"
rcp -p $i comp-2:$pwd/$i
echo "Finished with $i"
doneIs there a way I can check the parameter to see if it is a full... (5 Replies)
Hi,
I have broken my laptop hard drive so I would like to put it in an external box to backup my documents.
I have a doubt whether the interface of the hard disk is sata or ide.
Inside notes attached, is reported "controller SATA AHCI" but on the model section is given IDE hard disk
... (1 Reply)
Say there is a certain path I wish to always load the same page. So if they go to somesite.com/a/b/c, it always goes to myscript.php and fed a/b/c as a server variable.
I'm fairly sure this is possible but cannot remember the term it's called, and so cannot find it in web searches or... (7 Replies)
Hi guys ,
We are running machines in virtual environment.
As a part of virtual solution we have a disk created in form of files on host machine.
The problem is we are facing space crunch and need to re size the harddisk files of virtual machines.
There a catch the virtual machines are... (0 Replies)
Good Evening,
2 years ago, I set up an Ubuntu file-server for a friend, who is a photograph amateur. Basically, the server offers a software RAID-5 that can be accessed remotely from a MAC. Unfortunately, I didn't labeled the hard drives (i.e. which physical drive corresponds to the /dev/sdX... (2 Replies)
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
HI All
i have been assigned a task to create new filesystem with virtual disk
but i look into server there is no virtual disk avialable, how do i check the virtual disk in a server or how do i configure virtual disk.
please help me out on this issue. (2 Replies)
Hi,
I have a failed hard disk in my Sun Fire V240. Unfortunately it does not show up in 'cfgadm -al' or in the format command so I cannot unconfigure it and illuminate the blue light on the front to identify it. Is there any way of iluminating the blue lights on the other disks so I can at... (3 Replies)
Hi experts,
I need to determine if I have 4GB free space on my UNix server? Is there a way that I can do it instead of executing df -k . in each folder?
Thanks for your help. (3 Replies)