Login or Register to Ask a Question and Join Our Community


Hardware

[Solved] Boot Lockup After Drive Swap

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Special Forums Hardware [Solved] Boot Lockup After Drive Swap
# 1  
Old 02-02-2011
[Solved] Boot Lockup After Drive Swap
Hey All,

Im using Fedora 2.6 (which is cannot be changed for compatibility reasons).

I cloned a drive from a different server and when i added this drive to a new box, during startup it hangs on "Configuring Kernel Parameters:"

Is there any way to bypass this process and still boot correctly?

thanks in advance,

Rob.

---------- Post updated at 02:56 PM ---------- Previous update was at 10:30 AM ----------

After spending a few hours staring at the screen, i fixed the issue by removing "rhgb" from GRUB parameters and started up.

Then, after a few prompts for hardware mismatches etc it then asked to reconfigure X windows setup.

Restarted the system and all is well and good Smilie

Can mark this as fixed!
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

RAID 10 Failed Drive Swap

I am new to the AIX operating system and am seeking out some advice. We recently have had a drive go bad on our AIX server that is in a RAID 10 array. We have a replacement on the way. I was wondering what the correct steps are to swap out this drive. Does the server need to be powered off? Or can... (5 Replies)
Discussion started by: mpeter05
5 Replies

2. Solaris

Possible to increase swap size for existing UFS-based drive slice?

I like to increase swap size for my current server running solaris 10. Seems like the system is not using it's full 16G of physical memory. #swap -l swapfile dev swaplo blocks free /dev/dsk/c0t0d0s1 32,1 16 1058288 1058288 # swap -s total: 4125120k bytes... (17 Replies)
Discussion started by: JT-KGY
17 Replies

3. UNIX for Dummies Questions & Answers

[Solved] How to swap PIPE seperator delimiter?

I have file like below 1|4|OR|OLAP|INT|INT||CONSTANT|2012/08/07|9999/12/31|0|0|0|0|PRL|-358.1684563||||||||||36522|55791|LNR| 2|4|OR|OLAP|CLR|CLR||CONSTANT|2012/09/07|9999/12/31|0|0|0|0|PRL|-358.1684563||||||||||36522|57891|REGS|... (2 Replies)
Discussion started by: gkskumar
2 Replies

4. HP-UX

[Solved] D380/2 hard drive

Hello everybody, I've received yesterday a very old HP server: HP9000, A3579A, D380/2 with two 180 MHz PA-RISC CPUs, 256 MB RAM. Actual firmware is 38.40. But no hard drives. I'm looking for 18 or 36 GB HD references. Is 11i v3 HP-UX working on it? Or, what is the latest version? Is 256 MB... (4 Replies)
Discussion started by: Citroen
4 Replies

5. SCO

SCO 5.0.7 Tape Drive swap

Our tape drive died and I installed a newer Quantum DAT72 drive in it's place with the same SCSI ID. It still works, but with one major flaw, the system will lock up if I try to upgrade BackupEDGE or view NFS settings in scoadmin. I get a Transition to ready failure on ha=0* message when the... (4 Replies)
Discussion started by: psytropic
4 Replies

6. Solaris

Help Mirroring Boot drive

How do I mirror the boot drive, which I believe is /dev/dsk/c1t0d0s0. Filesystem size used avail capacity Mounted on /dev/dsk/c1t0d0s0 16G 457M 15G 3% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K ... (7 Replies)
Discussion started by: Kjons76
7 Replies

7. Homework & Coursework Questions

Changing Drive to be /Boot

Posted in wrong area, post can be deleted, my appologies. (0 Replies)
Discussion started by: derbarbarian
0 Replies

8. Ubuntu

Boot hangs while adding swap

Boot process hangs after reaching the following line: Adding 5853176k swap on /dev/mapper/mch-swap_1. Priority:-1 extents:1 across:5853176kUsing knoppix 6.2 as LiveCD, and mounting the partitions, I got the following: # /etc/fstab: static file system information. # # Use 'blkid -o value -s... (0 Replies)
Discussion started by: fzaker
0 Replies

9. SCO

Occasional Core Dump with hot swap USB Thumb Drive

Hello Unix World, I've been having this issue for the longest time. Here is my setup OS: SCO OpenServer 6.0 with mp4, mp3 Server: Dell PowerEdge 840, 800, 2900 USB Stick: Patriot 16GB High Speed, and many other different brands. Occasinaly while system is running and USB is pluged in the... (0 Replies)
Discussion started by: miles556
0 Replies

10. Filesystems, Disks and Memory

mksysb to hot swap hard drive

AIX 4.3.3 I am investigating methods of creating system backups. One method I am investigating is installing a hot swap hard drive and creating a mksysb to that hard drive. Does anyone have any ideas on getting this accomplished? I am thinking that I need a mounted file system from the 2nd... (0 Replies)
Discussion started by: jalburger
0 Replies
Login or Register to Ask a Question

LEARN ABOUT FREEBSD

mlxcontrol

MLXCONTROL(8)						    BSD System Manager's Manual 					     MLXCONTROL(8)

NAME

     mlxcontrol -- Mylex DAC-family RAID management utility

SYNOPSIS

     mlxcontrol <command> [args]
     mlxcontrol status [-qv] [drive]
     mlxcontrol rescan controller [controller ...]
     mlxcontrol detach drive [drive ...]
     mlxcontrol detach -a
     mlxcontrol check drive
     mlxcontrol config controller
     mlxcontrol help command

DESCRIPTION

     The mlxcontrol utility provides status monitoring and management functions for devices attached to the mlx(4) driver.

     Controller names are of the form "mlxN" where N is the unit number of the controller.  Drive names are of the form "mlxdN" where N is the
     unit number of the drive.	Do not specify the path to a device node.

     status   Print the status of controllers and system drives.  If one or more drives are specified, only print information about these drives,
	      otherwise print information about all controllers and drives in the system.  With the -v flag, display much more verbose informa-
	      tion.  With the -q flag, do not print any output.  This command returns 0 if all drives tested are online, 1 if one or more drives
	      are critical and 2 if one or more are offline.

     rescan   Rescan one or more controllers for non-attached system drives (e.g. drives that have been detached or created subsequent to driver
	      initialisation).	If the -a flag is supplied, rescan all controllers in the system.

     detach   Detach one or more system drives.  Drives must be unmounted and not opened by any other utility for this command to succeed.  If the
	      -a flag is supplied, detach all system drives from the nominated controller.

     check    Initiate a consistency check and repair pass on a redundant system drive (e.g. RAID1 or RAID5).  The controller will scan the system
	      drive and repair any inconsistencies.  This command returns immediately; use the status command to monitor the progress of the
	      check.

     rebuild  Requires two arguments, controller and physdrive as specified in the output of the status command.  All system drives using space on
	      the physical drive physdrive are rebuilt, reconstructing all data on the drive.  Note that each controller can only perform one
	      rebuild at a time.  This command returns immediately; use the status command to monitor the progress of the rebuild.

     config   Print the current configuration from the nominated controller.  This command will be updated to allow addition/deletion of system
	      drives from a configuration in a future release.

     help     Print usage information for command.

AUTHORS

     The mlxcontrol utility was written by Michael Smith <msmith@FreeBSD.org>.

BUGS

     The config command does not yet support modifying system drive configuration.

     Error log extraction is not yet supported.

BSD
								  April 10, 2000							       BSD