Login or Register to Ask a Question and Join Our Community


Hardware

Sun Blade 1000 keyboard not detected.

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Special Forums Hardware Sun Blade 1000 keyboard not detected.
# 1  
Old 08-25-2010
Sun Blade 1000 keyboard not detected.
Hello,

I have a sun blade 1000 machine, it passes post, has 2 750mhz sparc 3 cpus and has 4GB of ram.

I have setup a TIP connection and did everything i could to figure what the hell is going on, but I cannot it seems to me that the usb ports are not giving out any power.

I've tried all sorts of keyboard, sun type 6, type 7 and various pc keyboards, all USB.

When the machine powers on, I have a keyboard plugged in, but no LED on the keyboard lights up, also, no led on the optical mouse lights up either.

This tells me that something on board is failed. However, the machine passes POST... how can that be?

Any ideas why the USB ports seem dead?

-----------------------------------

Update, using the tty console I got it booting to solaris 9, however, still no power to the USB/NIC/FIREWIRE ports... what is going on?
Last edited by binary0x01; 08-26-2010 at 03:34 AM..
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Solaris

Execution problems with sun blade 150

hello i have a forte gamma camera Philips device . and its a medical device. this medical device is came with sun blade 150 pc and pegasys is printed on the sun blade pc .the problem is when i switched the power on , the sun blade runs and a white screen appear with the information about the... (6 Replies)
Discussion started by: moh_abaloo
6 Replies

2. Red Hat

Link not detected - Red Hat Linux HP Blade DL380p Gen8

Hi Admins One one of the RHEL 6 server, I am not able to detect 10G fiber link. ethtool is showing link not detected. Settings for eth4: Supported ports: Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame... (2 Replies)
Discussion started by: snchaudhari2
2 Replies

3. UNIX for Dummies Questions & Answers

SUN BLADE T6340 - which OS ?

Hi, I have server SUN BLADE T6340 and i tried install debian sparc on this machine. Will it work ? In the specification is written only Solaris 10. (4 Replies)
Discussion started by: PtaQ
4 Replies

4. Solaris

help installing solaris 10 on sun blade 1500

Hi everyone can someone please explain to me how to install solaris 10 on a sunblade 1500 using cdrom? Thanks for your assistance (1 Reply)
Discussion started by: cjashu
1 Replies

5. UNIX for Dummies Questions & Answers

Reinstalling Solaris 9 on Sun Blade 100

For the past ten years I have owned a blade 100, and I had Solaris 9 running on it. Due to the fact, 9 is woefully out of date, I wanted to try 10, but 10 needed more ram, so I beefed up the ram to the full 2 gig. I have two 15 gig ide drives in the box (stock drives). But unfortunately solaris... (2 Replies)
Discussion started by: RichardET
2 Replies

6. Solaris

Sun Blade 150 not a Sun?

I have recently re-installed Solaris 10 on a Sun Blade 150 followed by a patch set (10_Recommended) dated 2011.12.05. I have just noticed /bin/sun now returns false, rather than true. See below. $ uname -a SunOS myblade1 5.10 Generic_147440-07 sun4u sparc SUNW,Sun-Blade-100 $ /bin/sparc &&... (1 Reply)
Discussion started by: apmcd47
1 Replies

7. Solaris

adding memory to sun blade server ...

Hi, this is my 1st post here, I don't know is it proper or not for the question I have, but I may try ask anyway, since it is question about sun's hw/sw issue... I have my blade 1000 installed additional memory kits, it was originally 2G memory installed on Group0(Bank 0/2) Dimm slots, I got... (5 Replies)
Discussion started by: netshu
5 Replies

8. Solaris

A1000 Solaris 10 on Blade 1000

I have a SUN Blade 1000 running Solaris 10 and an A1000 array. I know that this combo is not supported by SUN but will it work? The raid manager software is installed and it says that the firmware needs to be upgraded -it is at I think level 2.05 something. I can see all the disks in a... (13 Replies)
Discussion started by: tribbles
13 Replies

9. Solaris

sun Blade 2000 and XVR100

hello, I have SunBlade 2000 with XVR-1000 graphics card. Xserver won't loaded. I've reinstalled OS 9 ( loaded Driver) nor 10 still won't do it. Anyone has this problem or have any ideas whats' wrong, greatly appreciated!! thanks in adv. (1 Reply)
Discussion started by: anphdula
1 Replies
Login or Register to Ask a Question

LEARN ABOUT OPENSOLARIS

bbc_beep

bbc_beep(7D)							      Devices							      bbc_beep(7D)

NAME

       bbc_beep -  Platform-dependent Beep driver for BBC-based hardware.

SYNOPSIS

       beep@unit-address

DESCRIPTION

       The  bbc_beep driver generates beeps on platforms (including Sun Blade 1000) that use BBC-based registers and USB keyboards. When the KIOC-
       CMD ioctl is issued to the USB keyboard module (see usbkbm(7M)) with command KBD_CMD_BELL/KBD_CMD_NOBELL, usbkbm(7M) passes the request	to
       the bbc_beep driver to turn the beep on and off, respectively.

FILES

       /platform/sun4u/kernel/drv/sparcv9/bbc_beep

	    64-bit ELF kernel driver

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |BBC-based SPARC		   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcarx.u		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       kbd(1), attributes(5), grbeep(7d), kb(7M), usbkbm(7M)

       Writing Device Drivers

DIAGNOSTICS

       None

SunOS 5.11							    18 Dec 2001 						      bbc_beep(7D)