👤
Home Man
Search
Today's Posts
Register

Gentoo Linux is a versatile and fast, completely free Linux distribution geared towards developers and network professionals.

Help & lead me to the end. VFS: readonly/fs couldn't mount.

Tags
gentoo, linux kernel

👤 Login to reply

 
Thread Tools Search this Thread
# 1  
Old 10-12-2012
Question Help & lead me to the end. VFS: readonly/fs couldn't mount.

In a case of root=/dev/ram0 real_root=/dev/sda2
No filesystem could mount root, tried: ext3 ext2...
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
http://imageplay.net/img/tya22288136/IMG0204A.jpg (real_root - real panic)

The case of omitting real_root and using just root=/dev/sda2
VFS: Mounted root (ext2 filesystem) readonly on device 8:2
http://imageplay.net/img/tya22288134/IMG0203A.jpg - after the last line hangs without panic (alt+sysrq+b helps)

List of all partitions (before kernel panic string):
0800 62522712 sda driver: sd
0801 204800 sda1 00000000-........0
0802 53928280 sda2 0...............0
0803 8388608 sda3 0........0
panic.....
Pid: 1, comm: swapper/0 Not tainted 3.4.9-gentoo #7

But, firstly about my system (wgetpaste -c lspci)
Paste #50707 at spacepaste
Code:
# lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port B)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS] (rev a2)
02:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
03:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12)
04:00.0 USB controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 01)
05:06.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)

Paste #50727 at spacepaste
Paste #50703 at spacepaste
Paste #50705 at spacepaste
.config :
Paste #50708 at spacepaste
grub.conf
Paste #50709 at spacepaste
/etc/fstab (May it be wrong without /shm?)
Paste #50710 at spacepaste
Paste #50711 at spacepaste
Paste #50721 at spacepaste
/etc/portage/make.conf
Paste #50712 at spacepaste
dmesg (right after boot from installation usb)
Paste #50726 at spacepaste

And in the hope of "Chapter 7", Linux Sea - my case could be some overlooked controller for my SSD Crucial M4 64. I need to clarify SSD is different with HDD in Kernel Setup? Or slightly.. mb AHCI+SATA+RAID is a must chain? As I have an AMD (asrock mb) I couldn't find where is my missed option PIIX (Intel PIIX or AMD analogy).
RAM and root file system support seem to be not very far from working system:
KRN - Imgur

- genkernel failed in the same way (VFS). That's why i began my long path make && make_modules
I've done the kernel without initramfs[*] and 2 partitions in ext2 (/boot ,/ ) in order to lessen the possibility of fail (esp on SSD). I can't fild those two in kernel except for Marvell:
Code:
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
03:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12)

I have no HDD only SSD and bootable flash minimal x86_64. Is an "PIIX4 PATA/SATA support" approprietable to me?
Why bzImage is in arch/x86/boot/bzImage (x86_64 only links to x86). And what i'm doing - recompiling kernel again & again with replaceing with cp.


Based on Pappy Kernel Seeds. ((Thanks to all you.. to this forum, the art of not being rude to ppl. with creative environment))

Last edited by Xcislav; 10-12-2012 at 12:49 PM..
# 2  
Old 03-08-2013
Test this, boot with a live Gentoo the same kernel. If this works, copy the running Kernelconfiguration to your system. Yes there are a lot of things there, but only for testing it should work.
Code:
add some chroot....
zcat /proc/config.gz > /usr/src/linux/.config
make -j? && make modules_install

Do this not work, add all available SATAdriver to your kernel, but not as modul. Maybe this is the problem. On my installations satadriver are the most problems.

For information: When you use an SSD, use the noop sheduler for HDDs, and set the "discard" Option in fstab for ssd.

Greetings
darktux
👤 Login to reply

« Previous Thread | Next Thread »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

More UNIX and Linux Forum Topics You Might Find Helpful
Thread Thread Starter Forum Replies Last Post
LC_ALL & LANG are set OK, but others couldn't set locale correctly. asdfg Solaris 2 03-12-2012 07:19 PM
NFS Share & Mount problem chinmayzen Web Programming 0 09-26-2010 07:09 AM
how to lead space in value gkskumar UNIX for Dummies Questions & Answers 2 05-09-2010 05:41 AM
Force readonly mount always. thegeek Debian 3 12-05-2009 03:54 AM
gzip having '&' at the end. Reddy482 Shell Programming and Scripting 2 11-30-2009 11:23 PM
Question: Help need to remove blank line & sed: Couldn't re-allocate memory error. senthil.ak UNIX for Dummies Questions & Answers 8 08-19-2009 07:07 AM
mount & umount in sigle-user mode StarSol Solaris 11 02-22-2009 09:29 AM
Mount, Divvy & SCO deloev Filesystems, Disks and Memory 0 05-24-2008 12:41 PM


All times are GMT -4. The time now is 04:39 AM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
×
UNIX.COM Login
Username:
Password:  
Show Password





Not a Forum Member?
Forgot Password?