Bad Magic Number


 
Thread Tools Search this Thread
Special Forums Hardware Filesystems, Disks and Memory Bad Magic Number
# 1  
Old 05-18-2006
Bad Magic Number

Dear All,
i have a SCSI hard disk drive i'm installing on it solaris 5 and the workstation is sun sparc, i made an image of this H.D using Norton Ghost 6, so i took off the SCSI H.D from the sun workstation and put it on a Compaq server then i booted the server from the Norton Ghost floppy disk and i saved the image file on the server (*.gho), when i got back to the SUN workstation and then installed the SCSI H.D, it gave me the message "Bad Magic Number", so i want to get the system back as it was without loosing the data. please tell me the right way to recover the system back without loses.
Thanks and regards
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Bad magic number in disk label.

This is first time post...found this forum when looking for possible solution to fix my sun pc. Just one day can't boot it already showing the following: Boot device: disk File args: Bad magic number in disk label Can't open disk label package Evaluating: boot Can't open boot device... (40 Replies)
Discussion started by: SHuKoSuGi
40 Replies

2. Solaris

Bad magic number error

So we have a new to us v240 server with no OS installed. It has an outdated version of OB and ALOM so before we install the OS we want to update both. We have a DVD with the latest OB patch burned on it. We do the boot cdrom command but receive the Bad Magic Number Error. Does an OS need to... (2 Replies)
Discussion started by: dunkpancakes
2 Replies

3. Filesystems, Disks and Memory

Can't repair super block, bad magic number

Hello all, I have a hard drive that I can't repair. The drive is WD15EARS - Filesystem ext4 ( not 100% sure ) It's used in a Synology DS110j NAS. I try to run fsck -p /dev/sdb on the HD and I get this: Bad magic number in super-block while trying to open /dev/sdb /dev/sdb: The superblock... (4 Replies)
Discussion started by: dallasw1983
4 Replies

4. Solaris

cpio: Bad magic number/header.

Hi, i got the following error while unpacking the archive file. cpio -icvd < as_sun_x86_101202_disk2.cpio Disk2/stage/Components/oracle.webdb.wwdoc/10.1.2.0.1/1/DataFiles/wwdoc.jar Disk2/stage/Components/oracle.webdb.wwdoc/10.1.2.0.1/1/DataFiles... (2 Replies)
Discussion started by: malikshahid85
2 Replies

5. Solaris

Solaris 8.2 Bad magic number

I'll keep it fairly straight forward. I work with a Solaris server and magically today it decided to take a dump on me. At first it give a long list of files that couldn't be acessed before terminating the boot process and returning to the 'ok' prompt. Booting in single-user mode allowed me to run... (4 Replies)
Discussion started by: Aon
4 Replies

6. Solaris

OpenSolaris 2009 bad magic number

Hi guys, I have a big problem wiht my old Netra T1 200. I want to install OpenSolaris 2009 but there's a problem, I burned the ISO image on a CD-RW and then I tryied to install it on netra, but the setup won't to start and the error is that in the attached image. Thanks for the support and sorry... (5 Replies)
Discussion started by: Ducati87
5 Replies

7. Solaris

BAD magic number in disc label...

Hello All, I m very new to this forum. i m having SUN NETRA X1 server with 40 GB HDD (Seagate) & 128 MB RAM. i m trying this server for SUN 10 Practise. As i m installing SUN 9 /10 with CD ,its giving me error after OK propmt *************************** #boot cdrom or #boot cdrom... (16 Replies)
Discussion started by: amrut_k
16 Replies

8. UNIX for Advanced & Expert Users

Bad magic number on /dev/md0

Hello All, (RHEL4) Few weeks ago I had posted a message in this forum about the problem I had when I replaced my two scsi disks and tried rebuild raid1 array. I somehow managed to up the system with working raid1 array. But the main problem persisted.. i.e when I reboot the system, mounting... (0 Replies)
Discussion started by: ravinandan
0 Replies

9. UNIX for Advanced & Expert Users

bad magic number

Hi, when installing a piece of third part software I get the error "Bad magic number" at one point when it tries to use libraries from the bea tuxedo server. Am I correct that this means that the software is expecting 32bit while I'm on 64bit? Is there a way around it or can it only be solved... (5 Replies)
Discussion started by: rein
5 Replies

10. UNIX for Dummies Questions & Answers

Bad magic number in super-block

I am running mandrake 8.2 and when booting I get the message: e2fschk: Bad magic number in super-block while trying to open /dev/hda8. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and really contains a valid an ext2 filesystem (and... (1 Reply)
Discussion started by: Jay
1 Replies
Login or Register to Ask a Question
SD(4)                                                        Linux Programmer's Manual                                                       SD(4)

NAME
sd - driver for SCSI disk drives SYNOPSIS
#include <linux/hdreg.h> /* for HDIO_GETGEO */ #include <linux/fs.h> /* for BLKGETSIZE and BLKRRPART */ CONFIGURATION
The block device name has the following form: sdlp, where l is a letter denoting the physical drive, and p is a number denoting the parti- tion on that physical drive. Often, the partition number, p, will be left off when the device corresponds to the whole drive. SCSI disks have a major device number of 8, and a minor device number of the form (16 * drive_number) + partition_number, where drive_num- ber is the number of the physical drive in order of detection, and partition_number is as follows: +3 partition 0 is the whole drive partitions 1-4 are the DOS "primary" partitions partitions 5-8 are the DOS "extended" (or "logical") partitions For example, /dev/sda will have major 8, minor 0, and will refer to all of the first SCSI drive in the system; and /dev/sdb3 will have major 8, minor 19, and will refer to the third DOS "primary" partition on the second SCSI drive in the system. At this time, only block devices are provided. Raw devices have not yet been implemented. DESCRIPTION
The following ioctls are provided: HDIO_GETGEO Returns the BIOS disk parameters in the following structure: struct hd_geometry { unsigned char heads; unsigned char sectors; unsigned short cylinders; unsigned long start; }; A pointer to this structure is passed as the ioctl(2) parameter. The information returned in the parameter is the disk geometry of the drive as understood by DOS! This geometry is not the physical geometry of the drive. It is used when constructing the drive's partition table, however, and is needed for convenient operation of fdisk(1), efdisk(1), and lilo(1). If the geometry information is not available, zero will be returned for all of the parameters. BLKGETSIZE Returns the device size in sectors. The ioctl(2) parameter should be a pointer to a long. BLKRRPART Forces a reread of the SCSI disk partition tables. No parameter is needed. The SCSI ioctl(2) operations are also supported. If the ioctl(2) parameter is required, and it is NULL, then ioctl(2) fails with the error EINVAL. FILES
/dev/sd[a-h] the whole device /dev/sd[a-h][0-8] individual block partitions COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/. Linux 2017-09-15 SD(4)