Adding new SCSI drive

10 More Discussions You Might Find Interesting

1. Hardware

SCSI drive

Hi i ahve a SCSI drive that it use to work but now is not working. The Sun machine can not read the drive. My question is there is any other way to get the data back from the SCSI drive? I think if i replace the chip board on teh SCSI drive it might help to just buy a new Board but there is any...

2. Hardware

Help with scsi tape drive problem

I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on...

3. Filesystems, Disks and Memory

Dead SCSI drive

I have 2 dead SCSI drives. Can anyone tell me a good way to repair the disks??? Please!

4. UNIX for Dummies Questions & Answers

External SCSI hard drive

Someone gave me a small external SCSI hard drive for my SunOS 5.8 test system. How do I make Unix see the hard drive?

5. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

6. Filesystems, Disks and Memory

format 2nd scsi drive

I have an sco unix v/386 version 4.26 open server. I need to add a 2nd scsi hard drive. I don't know how to partition & format it as a bootable drive & mount it. I know this is easy but I'm not familiar. Thanks

7. HP-UX

scsi floppy drive addressing

Does anyone know of a site that documents the various addressing schemes used with SCSI floppy disk drives?

8. Filesystems, Disks and Memory

Repartitioning scsi drive in Nextstep

Need to change the partitions on a SCSI drive with Nextstep. df shows filesystem kbytes used avail cap mounted on /dev/sd0a 2051824 231924 13% / /dev/sd0b 998332 9 0% /Vol2 /dev/sd0c 998332 9 0% /Vol3 /dev/sd0d 998332 9 0% /Vol4 /dev/sd0e 998332 9 0% /Vol5...

9. UNIX for Dummies Questions & Answers

scsi drive addon

Adding another scsi drive, no name, it came with the instruction manual in japanese, so of no use. We need to format it, it only shows up as 14 gigs, when we know it is a 40 gig drive, but have no specs on the cyl, etc. Combing through faqs, one of my coworkers found a blurb that unix won't...

10. UNIX for Dummies Questions & Answers

Scsi tape drive.

I'm running SCO OS 505 on a Compaq proliant 1600, and my tape drive will just not work. It was working properly and whent to Sh?ts when I tried to get the cd rom working. I have uninstalled any configured tape drive and rebooted and then configured a tape drive and rebooted still nothing. I'm...

LEARN ABOUT DEBIAN

imm

VPO(4)							   BSD Kernel Interfaces Manual 						    VPO(4)

NAME

     vpo -- parallel to SCSI interface driver

SYNOPSIS

     device vpo

     For one or more SCSI busses:
     device scbus

DESCRIPTION

     The vpo driver provide access to parallel port Iomega Zip and Jaz drives.

HARDWARE

     The vpo driver supports the following parallel to SCSI interfaces:

     o	 Adaptec AIC-7110 Parallel to SCSI interface (built-in to Iomega ZIP drives)
     o	 Iomega Jaz Traveller interface
     o	 Iomega MatchMaker SCSI interface (built-in to Iomega ZIP+ drives)

USAGE

     The driver should let you use a printer connected to the drive while transferring data.

     DOS and FreeBSD file systems are supported.  When mounting a DOS file system or formating a FreeBSD file system, check the slice of the disk
     with the fdisk(8) utility.

     In order to unixify a ZIP disk, put the following in /etc/disktab:

     zip|zip 100:
	     :ty=removable:se#512:nc#96:nt#64:ns#32:
	     :pa#196608:oa#0:ba#4096:fa#512:
	     :pb#196608:ob#0:bb#4096:fb#512:
	     :pc#196608:oc#0:bc#4096:fc#512:

     and use bsdlabel(8).

     If you have trouble with your driver, your parallel chipset may not run properly at the detected mode (NIBBLE, PS2 or EPP).  Tune the ppc(4)
     bootflags to force other modes.

SEE ALSO

     da(4), lpt(4), ppbus(4), ppc(4), scsi(4)

HISTORY

     The vpo manual page first appeared in FreeBSD 3.0.

AUTHORS

     This manual page was written by Nicolas Souchu.

BUGS

     During boot, the driver first tries to detect a classic ZIP, then a ZIP+.	The ZIP+ detection is intrusive and may send erroneous characters
     to your printer if the drive is not connected to your parallel port.

BSD
								 December 14, 2004							       BSD

Filesystems, Disks and Memory