Hello,
I receiving this error and failed raid 1 in a partiton. is this errors important?
Thanks.
Full SMART Status report:
Code :
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3000DM001-9YN166
Serial Number: W1F0KHVL
Firmware Version: CC4C
User Capacity: 3,000,592,982,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Dec 19 22:31:35 2012 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 087 006 Pre-fail Always - 94583040
3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 12
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 218116884
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 5023
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 12
183 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 1
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1246
188 Unknown_Attribute 0x0032 100 099 000 Old_age Always - 8590065668
189 High_Fly_Writes 0x003a 091 091 000 Old_age Always - 9
190 Airflow_Temperature_Cel 0x0022 063 061 045 Old_age Always - 37 (Lifetime Min/Max 33/38)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 3466
194 Temperature_Celsius 0x0022 037 040 000 Old_age Always - 37 (0 21 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 4
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 17076789973781
241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 15802775156821
242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 234706991727638
SMART Error Log Version: 1
ATA Error Count: 1246 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1246 occurred at disk power-on lifetime: 4845 hours (201 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 48d+01:14:29.931 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+01:14:29.931 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+01:14:29.913 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+01:14:29.913 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+01:14:29.913 READ FPDMA QUEUED
Error 1245 occurred at disk power-on lifetime: 4844 hours (201 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 48d+00:41:32.556 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:32.556 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:32.556 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:32.556 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:32.556 READ FPDMA QUEUED
Error 1244 occurred at disk power-on lifetime: 4844 hours (201 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 48d+00:41:07.628 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:07.628 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:07.628 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:07.628 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:07.628 READ FPDMA QUEUED
Error 1243 occurred at disk power-on lifetime: 4844 hours (201 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 48d+00:41:04.678 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:04.678 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:04.678 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:04.677 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:04.677 READ FPDMA QUEUED
Error 1242 occurred at disk power-on lifetime: 4844 hours (201 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 48d+00:41:01.735 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:01.735 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:01.735 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:01.735 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 48d+00:41:01.735 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4960 -
# 2 Extended offline Completed without error 00% 4926 -
# 3 Short offline Completed without error 00% 4850 -
# 4 Extended offline Completed: read failure 90% 4843 877918576
# 5 Extended offline Completed: read failure 90% 4836 877918576
# 6 Short offline Completed without error 00% 4817 -
# 7 Extended offline Completed: read failure 90% 4813 877918576
# 8 Short offline Completed without error 00% 4808 -
# 9 Short offline Completed without error 00% 4802 -
#10 Short offline Aborted by host 80% 4802 -
#11 Extended offline Aborted by host 90% 4802 -
#12 Short offline Completed without error 00% 4801 -
#13 Short offline Completed without error 00% 4345 -
#14 Short offline Completed without error 00% 2249 -
#15 Extended offline Completed without error 00% 5 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.