How do I check 4 physical damaged on Linux hard disks?

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Problem with damaged hard drive during bootup

Hello, I have a problem with the hard drive connected to my setup. When I connect the HDD which is damaged, and try to bring up my system, I get some error messages continuously on my console saying ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 frozen ata2.01: failed command:...

2. Red Hat

Create volume using LVM over 2 physical disks

I wanted to know how we can combine volumes over 2 physical drives. # fdisk -l Disk /dev/sda: 42.9 GB, 42949672960 bytes 255 heads, 63 sectors/track, 5221 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 ...

3. AIX

How to determine the physical volume fo the disks

This is the report I got running the comand rptconf, but I would like to know what is the capacity of the disks installed into our server power 6 with AIX System Model: IBM,7778-23X Machine Serial Number: 1066D5A Processor Type: PowerPC_POWER6 Processor Implementation Mode: POWER 6...

4. Linux

Linux Library symbolic link damaged

Hi, firstly I am not so familiar with linux and i think i have done some damage to the red hat server. It seems that now in command line I am unable to use any basic command whatsoever (ls, move, cp, bash, etc). I was trying to deploy an application and have changed the symbolic link (soft...

5. Solaris

6120 Array. Additional physical Disks and ZFS

Hi; I have 4 new disks in a 6120 Array attached to a SUN server running zfs. There are already two virtual disks on the array comprising of 3 disk raid 5 for each Vdisk. I need to add two more disks to each vdisk making each a 5 disk raid 5 Vdisk. If ZFS already has the original...

6. HP-UX

determine the physical size of the hard disk

Hi is there a cmd in hpux 11 to determine the physical size of the hard disk. not bdf command. i have searched the other threads here but cant find an answer. thank you guys

7. UNIX for Dummies Questions & Answers

Vertias (physical disks monitoring)

Can anyone tell me what Vertias is? Is it free? What is it used for exactly? Thank you in advance.

8. UNIX for Dummies Questions & Answers

monitoring the state of physical disks

Hello, I would like to know if there are commands that can be used to monitor the state of physical disks (including RAID) under AIX and SUN unix platforms? Thank you in advance.

9. Filesystems, Disks and Memory

how to assign same mount point for file systems mounted on physical disks

We have 6 hard disks attached to the hardware. Of this 2 hard disks are of 9 GB each. Now I want combine both the same in such a way that i see a combined entry in the output of df -k . The steps I follow are 1. Create partition on hard disks (Using format partition) 2. Run newfs -v for...

LEARN ABOUT MOJAVE

mkfs.minix

MKFS.MINIX(8)                                                  System Administration                                                 MKFS.MINIX(8)

NAME

       mkfs.minix - make a Minix filesystem

SYNOPSIS

       mkfs.minix [options] device [size-in-blocks]

DESCRIPTION

       mkfs.minix creates a Linux MINIX filesystem on a device (usually a disk partition).

       The device is usually of the following form:

              /dev/hda[1-8] (IDE disk 1)
              /dev/hdb[1-8] (IDE disk 2)
              /dev/sda[1-8] (SCSI disk 1)
              /dev/sdb[1-8] (SCSI disk 2)

       The device may be a block device or a image file of one, but this is not enforced.  Expect not much fun on a character device :-).

       The  size-in-blocks parameter is the desired size of the file system, in blocks.  It is present only for backwards compatibility.  If omit-
       ted the size will be determined automatically.  Only block counts strictly greater than 10 and strictly less than 65536 are allowed.

OPTIONS

       -c, --check
              Check the device for bad blocks before creating the filesystem.  If any are found, the count is printed.

       -n, --namelength length
              Specify the maximum length of filenames.  Currently, the only allowable values are 14 and 30 for file system versions 1 and 2.  Ver-
              sion 3 allows only value 60.  The default is 30.

       -i, --inodes number
              Specify the number of inodes for the filesystem.

       -l, --badblocks filename
              Read the list of bad blocks from filename.  The file has one bad-block number per line.  The count of bad blocks read is printed.

       -1     Make a Minix version 1 filesystem.  This is the default.

       -2, -v Make a Minix version 2 filesystem.

       -3     Make a Minix version 3 filesystem.

       -V, --version
              Display version information and exit.  The long option cannot be combined with other options.

       -h, --help
              Display help text and exit.

EXIT CODES

       The exit code returned by mkfs.minix is one of the following:

       0      No errors

       8      Operational error

       16     Usage or syntax error

SEE ALSO

       fsck(8), mkfs(8), reboot(8)

AVAILABILITY

       The mkfs.minix command is part of the util-linux package and is available from https://www.kernel.org/pub/linux/utils/util-linux/.

util-linux                                                           June 2015                                                       MKFS.MINIX(8)

Filesystems, Disks and Memory