9 More Discussions You Might Find Interesting
1. Red Hat
I have an Oracle Linux 7.1 vsphere host built. It's be preconfigured with our security configurations.
What I would like to do is unconfigure this host. Then set the host to do firstboot --reconfigure.
how do I do that using /etc/sysconfig/firstboot?
I've tried setting
... (10 Replies)
Discussion started by: os2mac
10 Replies
2. Linux
Hi everyone,
I am trying to prevent the ehci_hcd kernel module to load at boot time.
Here's what I've tried so far:
1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here):
2) Blacklisted the module by adding the following string to
3) Tried to blacklist the module... (0 Replies)
Discussion started by: gacanepa
0 Replies
3. Solaris
Hi,
I wanted to know if a reconfig reboot is necessary from the ok prompt when am changing the CPU or a simple boot command would also work...?
Thanks in advance. (5 Replies)
Discussion started by: aksijain
5 Replies
4. Solaris
will reboot -- -r update boot_archive ?
this is the what I see on my console.
# reboot -- -r
15+0 records in
15+0 records out
syncing file systems... done
It doesn't say updating /platform/sun4u/boot_archive as it displayed on my console after init 0or init 6 ? (3 Replies)
Discussion started by: zigi_p5
3 Replies
5. Solaris
Hi gurus
Could anybody tell me which file is read by kernel to set its default system kernal parameters values in solaris. Here I am not taking about /etc/system file which is used to load kernal modules or to change any default system kernal parameter value
Is it /dev/kmem file or something... (1 Reply)
Discussion started by: girish.batra
1 Replies
6. Linux
supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" message comes.
I tried giving acpi=off to the kernel command line but same problem.It shows everything ok and no problem with memory and processors and power supplies.Wt could be the reason?
It has... (1 Reply)
Discussion started by: pankajd
1 Replies
7. Solaris
Current Setup:
OS: Solaris 10 (5.10) x64
Motherboard: SUPERMICRO MBD-PDSME+-O LGA 775 Intel 3010
SATA Controller: SUPERMICRO AOC-SAT2-MV8 - SATA Controller (x2)
Link Aggregated @ 2Gb: 110MB sustained throughput :b:
NAME STATE READ WRITE CKSUM
storagepool ONLINE ... (3 Replies)
Discussion started by: sol72
3 Replies
8. SuSE
Hi All,
Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff.
Cheers,
Brendan (4 Replies)
Discussion started by: Brendan Kennedy
4 Replies
9. Programming
hi all!
i have developed a mechanism in system.c to count how many times each kernel call is called. The results are held in an array in system.c . What i want to do is to create a new kernel call which will print this array. I need help in passing the array from system.c to the new kernel call. ... (5 Replies)
Discussion started by: aureliano
5 Replies
CFREE(3) Linux Programmer's Manual CFREE(3)
NAME
cfree - free allocated memory
SYNOPSIS
#include <stdlib.h>
/* In SunOS 4 */
int cfree(void *ptr);
/* In glibc or FreeBSD libcompat */
void cfree(void *ptr);
/* In SCO OpenServer */
void cfree(char *ptr, unsigned num, unsigned size);
/* In Solaris watchmalloc.so.1 */
void cfree(void *ptr, size_t nelem, size_t elsize);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
cfree(): _BSD_SOURCE || _SVID_SOURCE
DESCRIPTION
This function should never be used. Use free(3) instead.
1-arg cfree
In glibc, the function cfree() is a synonym for free(3), "added for compatibility with SunOS".
Other systems have other functions with this name. The declaration is sometimes in <stdlib.h> and sometimes in <malloc.h>.
3-arg cfree
Some SCO and Solaris versions have malloc libraries with a 3-argument cfree(), apparently as an analog to calloc(3).
If you need it while porting something, add
#define cfree(p, n, s) free((p))
to your file.
A frequently asked question is "Can I use free(3) to free memory allocated with calloc(3), or do I need cfree()?" Answer: use free(3).
An SCO manual writes: "The cfree routine is provided for compliance to the iBCSe2 standard and simply calls free. The num and size argu-
ments to cfree are not used."
RETURN VALUE
The SunOS version of cfree() (which is a synonym for free(3)) returns 1 on success and 0 on failure. In case of error, errno is set to
EINVAL: the value of ptr was not a pointer to a block previously allocated by one of the routines in the malloc(3) family.
CONFORMING TO
The 3-argument version of cfree() as used by SCO conforms to the iBCSe2 standard: Intel386 Binary Compatibility Specification, Edition 2.
SEE ALSO
malloc(3)
COLOPHON
This page is part of release 3.44 of the Linux man-pages project. A description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
2007-07-26 CFREE(3)