Login or Register to Ask a Question and Join Our Community


Debian

NFS problems (Debian)

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Linux Debian NFS problems (Debian)
# 15  
Old 02-20-2009
what does /var/log/messages show?
# 16  
Old 02-20-2009
This is what it shows:

Jan 30 18:18:03 masternode kernel: portmap: server localhost not responding, timed out
Jan 30 18:18:03 masternode kernel: RPC: failed to contact portmap (errno -5).
# 17  
Old 02-20-2009
run this command.

/etc/init.d/portmapd start and see what happens / what messages say
# 18  
Old 02-20-2009
I just started the cluster and run the command you said. This is the complete list of messages I get:

Code:
Feb 20 18:20:24 zape syslogd 1.4.1#18: restart.
Feb 20 18:20:24 zape kernel: klogd 1.4.1#18, log source = /proc/kmsg started.
Feb 20 18:20:24 zape kernel: Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-23) (dannf@debian.org) (gcc version 4.1.2 2006$
Feb 20 18:20:24 zape kernel: BIOS-provided physical RAM map:
Feb 20 18:20:24 zape kernel:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Feb 20 18:20:24 zape kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Feb 20 18:20:24 zape kernel:  BIOS-e820: 0000000000100000 - 000000000ff77000 (usable)
Feb 20 18:20:24 zape kernel:  BIOS-e820: 000000000ff77000 - 000000000ff79000 (ACPI NVS)
Feb 20 18:20:24 zape kernel:  BIOS-e820: 000000000ff79000 - 0000000010000000 (reserved)
Feb 20 18:20:24 zape kernel:  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Feb 20 18:20:24 zape kernel:  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Feb 20 18:20:24 zape kernel:  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Feb 20 18:20:24 zape kernel: 0MB HIGHMEM available.
Feb 20 18:20:24 zape kernel: 255MB LOWMEM available.
Feb 20 18:20:24 zape kernel: found SMP MP-table at 000fe710
Feb 20 18:20:24 zape kernel: DMI 2.3 present.
Feb 20 18:20:24 zape kernel: DELL GX240 detected: force use of acpi=ht
Feb 20 18:20:24 zape kernel: ACPI: PM-Timer IO Port: 0x808
Feb 20 18:20:24 zape kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Feb 20 18:20:24 zape kernel: Processor #0 15:0 APIC version 20
Feb 20 18:20:24 zape kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
Feb 20 18:20:24 zape kernel: Using ACPI for processor (LAPIC) configuration information
Feb 20 18:20:24 zape kernel: Intel MultiProcessor Specification v1.4
Feb 20 18:20:24 zape kernel:     Virtual Wire compatibility mode.
Feb 20 18:20:24 zape kernel: OEM ID: DELL     Product ID: Opti GX240   APIC at: 0xFEE00000
Feb 20 18:20:24 zape kernel: I/O APIC #1 Version 32 at 0xFEC00000.
Feb 20 18:20:24 zape kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Feb 20 18:20:24 zape kernel: Processors: 1
Feb 20 18:20:24 zape kernel: Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
Feb 20 18:20:24 zape kernel: Detected 1694.600 MHz processor.
Feb 20 18:20:24 zape kernel: Built 1 zonelists.  Total pages: 65399
Feb 20 18:20:24 zape kernel: Kernel command line: root=/dev/hda1 ro
Feb 20 18:20:24 zape kernel: Enabling fast FPU save and restore... done.
Feb 20 18:20:24 zape kernel: Enabling unmasked SIMD FPU exception support... done.
Feb 20 18:20:24 zape kernel: Initializing CPU#0
Feb 20 18:20:24 zape kernel: PID hash table entries: 1024 (order: 10, 4096 bytes)
Feb 20 18:20:24 zape kernel: Console: colour VGA+ 80x25
Feb 20 18:20:24 zape kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 20 18:20:24 zape kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Feb 20 18:20:24 zape kernel: Memory: 251700k/261596k available (1541k kernel code, 9312k reserved, 580k data, 196k init, 0k $
Feb 20 18:20:24 zape kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Feb 20 18:20:24 zape kernel: Calibrating delay using timer specific routine.. 3392.59 BogoMIPS (lpj=6785195)
Feb 20 18:20:24 zape kernel: Security Framework v1.0.0 initialized
Feb 20 18:20:24 zape kernel: SELinux:  Disabled at boot.
Feb 20 18:20:24 zape kernel: Capability LSM initialized
Feb 20 18:20:24 zape kernel: Mount-cache hash table entries: 512
Feb 20 18:20:24 zape kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Feb 20 18:20:24 zape kernel: CPU: L2 cache: 256K
Feb 20 18:20:24 zape kernel: CPU: Hyper-Threading is disabled
Feb 20 18:20:24 zape kernel: Intel machine check architecture supported.
Feb 20 18:20:24 zape kernel: Intel machine check reporting enabled on CPU#0.
Feb 20 18:20:24 zape kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Feb 20 18:20:24 zape kernel: CPU0: Thermal monitoring enabled
Feb 20 18:20:24 zape kernel: Compat vDSO mapped to ffffe000.
Feb 20 18:20:24 zape kernel: Checking 'hlt' instruction... OK.
Feb 20 18:20:24 zape kernel: SMP alternatives: switching to UP code
Feb 20 18:20:24 zape kernel: Freeing SMP alternatives: 12k freed
Feb 20 18:20:24 zape kernel: CPU0: Intel(R) Pentium(R) 4 CPU 1700MHz stepping 0a
Feb 20 18:20:24 zape kernel: Total of 1 processors activated (3392.59 BogoMIPS).
Feb 20 18:20:24 zape kernel: ExtINT not setup in hardware but reported by MP table
Feb 20 18:20:24 zape kernel: ENABLING IO-APIC IRQs
Feb 20 18:20:24 zape kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Feb 20 18:20:24 zape kernel: Brought up 1 CPUs
Feb 20 18:20:24 zape kernel: migration_cost=0
Feb 20 18:20:24 zape kernel: checking if image is initramfs... it is
Feb 20 18:20:24 zape kernel: Freeing initrd memory: 4380k freed
Feb 20 18:20:24 zape kernel: NET: Registered protocol family 16
Feb 20 18:20:24 zape kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbe5e, last bus=2
Feb 20 18:20:24 zape kernel: PCI: Using configuration type 1
Feb 20 18:20:24 zape kernel: Setting up standard PCI resources
Feb 20 18:20:24 zape kernel: ACPI: Interpreter disabled.
Feb 20 18:20:24 zape kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 20 18:20:24 zape kernel: pnp: PnP ACPI: disabled
Feb 20 18:20:24 zape kernel: PnPBIOS: Scanning system for PnP BIOS support...
Feb 20 18:20:24 zape kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
Feb 20 18:20:24 zape kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
Feb 20 18:20:24 zape kernel: PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
Feb 20 18:20:24 zape kernel: PCI: Probing PCI hardware
Feb 20 18:20:24 zape kernel: PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
Feb 20 18:20:24 zape kernel: PCI quirk: region 0880-08bf claimed by ICH4 GPIO
Feb 20 18:20:24 zape kernel: PCI: Transparent bridge - 0000:00:1e.0
Feb 20 18:20:24 zape kernel: PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
Feb 20 18:20:24 zape kernel: PCI->APIC IRQ transform: 0000:00:1f.2[D] -> IRQ 185
Feb 20 18:20:24 zape kernel: PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 169
Feb 20 18:20:24 zape kernel: PCI->APIC IRQ transform: 0000:00:1f.4[C] -> IRQ 177
Feb 20 18:20:24 zape kernel: PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 169
Feb 20 18:20:24 zape kernel: PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 161
Feb 20 18:20:24 zape kernel: PCI->APIC IRQ transform: 0000:02:0c.0[A] -> IRQ 177
Feb 20 18:20:24 zape kernel: pnp: 00:00: ioport range 0x800-0x8df could not be reserved
Feb 20 18:20:24 zape kernel: pnp: 00:00: ioport range 0xc00-0xc7f has been reserved
Feb 20 18:20:24 zape kernel: PCI: Bridge: 0000:00:01.0
Feb 20 18:20:24 zape kernel:   IO window: e000-efff
Feb 20 18:20:24 zape kernel:   MEM window: ff900000-ffafffff
Feb 20 18:20:24 zape kernel:   PREFETCH window: f8000000-fbffffff
Feb 20 18:20:24 zape kernel: PCI: Bridge: 0000:00:1e.0
Feb 20 18:20:24 zape kernel:   IO window: d000-dfff
Feb 20 18:20:24 zape kernel:   MEM window: ff700000-ff8fffff
Feb 20 18:20:24 zape kernel:   PREFETCH window: 20000000-200fffff
Feb 20 18:20:24 zape kernel: NET: Registered protocol family 2
Feb 20 18:20:24 zape kernel: IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Feb 20 18:20:24 zape kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Feb 20 18:20:24 zape kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Feb 20 18:20:24 zape kernel: TCP: Hash tables configured (established 8192 bind 4096)
Feb 20 18:20:24 zape kernel: TCP reno registered
Feb 20 18:20:24 zape kernel: Simple Boot Flag at 0x7a set to 0x1
Feb 20 18:20:24 zape kernel: audit: initializing netlink socket (disabled)
Feb 20 18:20:24 zape kernel: audit(1235150408.056:1): initialized
Feb 20 18:20:24 zape kernel: VFS: Disk quotas dquot_6.5.1
Feb 20 18:20:24 zape kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 20 18:20:24 zape kernel: Initializing Cryptographic API
Feb 20 18:20:24 zape kernel: io scheduler noop registered
Feb 20 18:20:24 zape kernel: io scheduler anticipatory registered
Feb 20 18:20:24 zape kernel: io scheduler deadline registered
Feb 20 18:20:24 zape kernel: io scheduler cfq registered (default)
Feb 20 18:20:24 zape kernel: isapnp: Scanning for PnP cards...
Feb 20 18:20:24 zape kernel: isapnp: No Plug & Play device found
Feb 20 18:20:24 zape kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Feb 20 18:20:24 zape kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 20 18:20:24 zape kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 20 18:20:24 zape kernel: 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 20 18:20:24 zape kernel: 00:02: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 20 18:20:24 zape kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Feb 20 18:20:24 zape kernel: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
Feb 20 18:20:24 zape kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
Feb 20 18:20:24 zape kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 20 18:20:24 zape kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 20 18:20:24 zape kernel: mice: PS/2 mouse device common for all mice
Feb 20 18:20:24 zape kernel: TCP bic registered
Feb 20 18:20:24 zape kernel: NET: Registered protocol family 1
Feb 20 18:20:24 zape kernel: NET: Registered protocol family 17
Feb 20 18:20:24 zape kernel: NET: Registered protocol family 8
Feb 20 18:20:24 zape kernel: NET: Registered protocol family 20
Feb 20 18:20:24 zape kernel: Using IPI No-Shortcut mode
Feb 20 18:20:24 zape kernel: Freeing unused kernel memory: 196k freed
Feb 20 18:20:24 zape kernel: Time: tsc clocksource has been installed.
Feb 20 18:20:24 zape kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 20 18:20:24 zape kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 20 18:20:24 zape kernel: ICH2: IDE controller at PCI slot 0000:00:1f.1
Feb 20 18:20:24 zape kernel: ICH2: chipset revision 18
Feb 20 18:20:24 zape kernel: ICH2: not 100%% native mode: will probe irqs later
Feb 20 18:20:24 zape kernel:     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Feb 20 18:20:24 zape kernel:     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Feb 20 18:20:24 zape kernel: usbcore: registered new driver usbfs
Feb 20 18:20:24 zape kernel: usbcore: registered new driver hub
Feb 20 18:20:24 zape kernel: epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>
Feb 20 18:20:24 zape kernel:   http://www.scyld.com/network/epic100.html
Feb 20 18:20:24 zape kernel:   (unofficial 2.4.x kernel port, version 2.0, June 27, 2006)
Feb 20 18:20:24 zape kernel: USB Universal Host Controller Interface driver v3.0
Feb 20 18:20:24 zape kernel: hda: Maxtor 5T020H2, ATA DISK drive
Feb 20 18:20:24 zape kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 20 18:20:24 zape kernel: hdc: Lite-On LTN486 48x Max, ATAPI CD/DVD-ROM drive
Feb 20 18:20:24 zape kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb 20 18:20:24 zape kernel: epic100 0000:02:07.0: MII transceiver #3 control 3000 status 7809.
Feb 20 18:20:24 zape kernel: epic100 0000:02:07.0: Autonegotiation advertising 01e1 link partner 0001.
Feb 20 18:20:24 zape kernel: eth0: SMSC EPIC/100 83c170 at 0xdc00, IRQ 161, 00:e0:29:28:e9:73.
Feb 20 18:20:24 zape kernel: uhci_hcd 0000:00:1f.2: UHCI Host Controller
Feb 20 18:20:24 zape kernel: uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
Feb 20 18:20:24 zape kernel: uhci_hcd 0000:00:1f.2: irq 185, io base 0x0000ff80
Feb 20 18:20:24 zape kernel: usb usb1: configuration #1 chosen from 1 choice
Feb 20 18:20:24 zape kernel: hub 1-0:1.0: USB hub found
Feb 20 18:20:24 zape kernel: hub 1-0:1.0: 2 ports detected
Feb 20 18:20:24 zape kernel: hda: max request size: 128KiB
Feb 20 18:20:24 zape kernel: hda: Host Protected Area detected.
Feb 20 18:20:24 zape kernel: ^Icurrent capacity is 39062500 sectors (20000 MB)
Feb 20 18:20:24 zape kernel: ^Inative  capacity is 40021632 sectors (20491 MB)
Feb 20 18:20:24 zape kernel: hda: Host Protected Area disabled.
Feb 20 18:20:24 zape kernel: hda: 40021632 sectors (20491 MB) w/2048KiB Cache, CHS=39704/16/63, UDMA(100)
Feb 20 18:20:24 zape kernel: hda: cache flushes not supported
Feb 20 18:20:24 zape kernel:  hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
Feb 20 18:20:24 zape kernel: uhci_hcd 0000:00:1f.4: UHCI Host Controller
Feb 20 18:20:24 zape kernel: uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
Feb 20 18:20:24 zape kernel: uhci_hcd 0000:00:1f.4: irq 177, io base 0x0000ff60
Feb 20 18:20:24 zape kernel: usb usb2: configuration #1 chosen from 1 choice
Feb 20 18:20:24 zape kernel: hub 2-0:1.0: USB hub found
Feb 20 18:20:24 zape kernel: hub 2-0:1.0: 2 ports detected
Feb 20 18:20:24 zape kernel: hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
Feb 20 18:20:24 zape kernel: Uniform CD-ROM driver Revision: 3.20
Feb 20 18:20:24 zape kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
Feb 20 18:20:24 zape kernel: 0000:02:0c.0: 3Com PCI 3c905C Tornado at d080cc00.
Feb 20 18:20:24 zape kernel: Attempting manual resume
Feb 20 18:20:24 zape kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Feb 20 18:20:24 zape kernel: EXT3-fs: write access will be enabled during recovery.
Feb 20 18:20:24 zape kernel: kjournald starting.  Commit interval 5 seconds
Feb 20 18:20:24 zape kernel: EXT3-fs: recovery complete.
Feb 20 18:20:24 zape kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 20 18:20:24 zape kernel: Linux agpgart interface v0.101 (c) Dave Jones
Feb 20 18:20:24 zape kernel: agpgart: Detected an Intel i845 Chipset.
Feb 20 18:20:24 zape kernel: agpgart: AGP aperture is 64M @ 0xf4000000
Feb 20 18:20:24 zape kernel: parport: PnPBIOS parport detected.
Feb 20 18:20:24 zape kernel: parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
Feb 20 18:20:24 zape kernel: Floppy drive(s): fd0 is 1.44M
Feb 20 18:20:24 zape kernel: input: PC Speaker as /class/input/input0
Feb 20 18:20:24 zape kernel: FDC 0 is a post-1991 82077
Feb 20 18:20:24 zape kernel: Real Time Clock Driver v1.12ac
Feb 20 18:20:24 zape kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 20 18:20:24 zape kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb 20 18:20:24 zape kernel: intel8x0_measure_ac97_clock: measured 56008 usecs
Feb 20 18:20:24 zape kernel: intel8x0: clocking to 41148
Feb 20 18:20:24 zape kernel: Intel 810 + AC97 Audio, version 1.01, 16:36:45 Oct 13 2008
Feb 20 18:20:24 zape kernel: Adding 979956k swap on /dev/hda5.  Priority:-1 extents:1 across:979956k
Feb 20 18:20:24 zape kernel: EXT3 FS on hda1, internal journal
Feb 20 18:20:24 zape kernel: loop: loaded (max 8 devices)
Feb 20 18:20:24 zape kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
Feb 20 18:20:24 zape kernel: kjournald starting.  Commit interval 5 seconds
Feb 20 18:20:24 zape kernel: EXT3 FS on hda8, internal journal
Feb 20 18:20:24 zape kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 20 18:20:24 zape kernel: kjournald starting.  Commit interval 5 seconds
Feb 20 18:20:24 zape kernel: EXT3 FS on hda7, internal journal
Feb 20 18:20:24 zape kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 20 18:20:24 zape kernel: kjournald starting.  Commit interval 5 seconds
Feb 20 18:20:24 zape kernel: EXT3 FS on hda6, internal journal
Feb 20 18:20:24 zape kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 20 18:20:24 zape kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Feb 20 18:20:24 zape kernel: Netfilter messages via NETLINK v0.30.
Feb 20 18:20:24 zape kernel: ip_conntrack version 2.4 (2043 buckets, 16344 max) - 224 bytes per conntrack
Feb 20 18:20:24 zape kernel: eth1:  setting full-duplex.
Feb 20 18:20:24 zape kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Feb 20 18:20:25 zape kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Feb 20 18:20:25 zape kernel: NFSD: starting 90-second grace period
Feb 20 18:20:25 zape kernel: eth0: Setting full-duplex based on MII #3 link partner capability of cde1.
Feb 20 18:21:00 zape kernel: portmap: server localhost not responding, timed out
Feb 20 18:21:00 zape kernel: RPC: failed to contact portmap (errno -5).
Feb 20 18:21:35 zape kernel: portmap: server localhost not responding, timed out
Feb 20 18:21:35 zape kernel: RPC: failed to contact portmap (errno -5).
Feb 20 18:22:10 zape kernel: portmap: server localhost not responding, timed out
Feb 20 18:22:10 zape kernel: RPC: failed to contact portmap (errno -5).
Feb 20 18:22:10 zape kernel: NET: Registered protocol family 10
Feb 20 18:22:10 zape kernel: lo: Disabled Privacy Extensions
Feb 20 18:22:10 zape kernel: IPv6 over IPv4 tunneling driver
Feb 20 18:23:11 zape kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Feb 20 18:23:11 zape kernel: NFSD: starting 90-second grace period
Feb 20 18:23:46 zape kernel: portmap: server localhost not responding, timed out
Feb 20 18:23:46 zape kernel: RPC: failed to contact portmap (errno -5).
Feb 20 18:24:21 zape kernel: portmap: server localhost not responding, timed out
Feb 20 18:24:21 zape kernel: RPC: failed to contact portmap (errno -5).
Feb 20 18:24:56 zape kernel: portmap: server localhost not responding, timed out
Feb 20 18:24:56 zape kernel: RPC: failed to contact portmap (errno -5).

# 19  
Old 02-20-2009
what does /etc/hosts look like?
# 20  
Old 02-20-2009
Code:
127.0.0.1       localhost
192.168.1.122   zape.cutrecluster.cemfi zape

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

# 21  
Old 02-20-2009
By the way, when I ran /etc/init.d/portmap start the answer was:

Code:
zape:/home/joan# /etc/init.d/portmap start
Starting portmap daemon...Already running..
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Red Hat

Memory problems in NFS client server

Hi all, i have some doubts in a situation that i fail to get an answer in Google. I have a solaris 10 nfs server and 5 centos 6.0 nfs clients. The problem/situation is that in the clients the free memory is "disappearing" along the time (passing to used)..and it gets free if i umount the... (5 Replies)
Discussion started by: blast
5 Replies

2. Red Hat

NFS problems

Hi All, I hoping someone can help me get my NFS working properly. I don't know why I'm having little issues... Overall, NFS is working, therefore, the problem may not be with NFS. I can ssh to remote nodes and view NFS shared directories (/home). Here is the problem, when on a node and I open a... (2 Replies)
Discussion started by: Bic121
2 Replies

3. AIX

NFS mount problems on AIX

Hi, I have two machines (AIX) each on a different VLAN. Need to mount a filesystem using nfs on the other one. When I export the nfs file system its a breeze. But when I try to mount it on the other machine the smitty command hangs on "running" and i get an OK from smitty but with this... (6 Replies)
Discussion started by: aixromeo
6 Replies

4. Debian

Debian Lenny update problems

Hi everybody! I have a very big problem, I can not make any updates on my debian lenny. I get everytime this errors with apt-get update: Err http://security.debian.org lenny/updates Release.gpg Connection failed Err http://www.backports.org lenny-backports Release.gpg Connection... (2 Replies)
Discussion started by: magge
2 Replies

5. Solaris

Having problems starting up NFS on an OpenSolaris box

I am trying to set up an OpenSolaris box to be an NFS server. The OpenSolaris version is 2008.11. The kernel (uname -a output) is: SunOS minime-28 5.11 snv_101b i86pc i386 i86pc It is running ZFS but I know nothing about ZFS. I have an entry in the /etc/dfs/dfstab file: share -F... (1 Reply)
Discussion started by: sqa777
1 Replies

6. UNIX for Advanced & Expert Users

NFS Problems

I am having a really bad day today. I am trying to get an nfs mount to work. I want to have a mount from machinea:/home going to /home on machineb. I can mount machinea:/home on any mount point EXCEPT /home and see the files. I can not see the files or list the directory (it hangs) when I mount... (17 Replies)
Discussion started by: mbathrick
17 Replies

7. UNIX for Dummies Questions & Answers

nfs mount and links removal problems.

Ok, so I have an nfs mount setup and within it there are symbolic links to other directories and such. So anyways I created a link to a directory like so ln -s /var/stuff/more/stuff/here/ stuff/ and i ended up with directory stuff with link 'here' inside. so i was pieved and decided... (1 Reply)
Discussion started by: VRoemer
1 Replies

8. UNIX for Dummies Questions & Answers

SCO NFS problems

Hi, I've got a really old system we use for call logging. The OS is SCO 3.2 uname -a output SCO_SV bts7053 3.2 2 i386 the problem we are having is that its no longer doing its backups. The original problem was the tape drive, which has been replaced twice now. Because the company are... (1 Reply)
Discussion started by: johno12345
1 Replies

9. UNIX for Advanced & Expert Users

NFS server problems [merged]

I have a machine A NFS mounted on machine B I am doing a build from machine B on the MFS mounted dir of machine A but I keep getting the following: NFS server A not responding still trying. I go to machine A and can log onto machine A and everything seems fine. How do I go about finding... (6 Replies)
Discussion started by: brv
6 Replies
Login or Register to Ask a Question