I'm trying to run clusterKnoppix live cd from a couple machines but it only works from one computer. The other three, my toshiba laptop, emachine, and hp machine can't find the filesystem.. the live cd stops booting and gives me a error saying it couldn't find knoppix filesystem and then gives me a couple commands to work with.. mount, umount.. and a couple more.
I noticed that the machine that worked, my gateway, looked in /dev/scd1 or 0 don't remember.. the other machines don't even look in this file.
When I login to the live console of my server and go to the console, I am getting the below message
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path... (11 Replies)
Hi Guys,
I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
... (5 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
I have installed Solaris 10 OS in Sun Virtual Box that uses x86 32 bit system. After an abnormal shutdown i'm getting the following message on the console when i try to boot.
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use... (3 Replies)
I installed solaris virtually and tried to format the partitions .. I dont know what went wrong, It got rebooted and hangs in the screen "No partitions" and after pressing Enter button it goes to "INT18 boot failure" and hangs there once again . Could any one of you suggest why this has happened... (3 Replies)
Hi all
I used a dual boot operating system and it works fine for me. Now , i install a Ati radeon 9250 Agp card on my system and this results in boot failure of fedora 6. The graphics card is working fine with windows XP , i.e i have no compatibility issues.The system also refuses to boot when i... (2 Replies)
Hello.
System is a HP Visualize C3600 running X11 and after a power failure machine will not boot (see error messages below)
From what I've read, this may be caused by a corrupted etc/inittab file. Solution suggested on other websites is to boot in single user mode and edit file inittab... (2 Replies)
KiokuDB::LiveObjects(3pm) User Contributed Perl Documentation KiokuDB::LiveObjects(3pm)NAME
KiokuDB::LiveObjects - Live object set tracking
SYNOPSIS
$live_objects->insert( $entry => $object );
$live_objects->insert( $id => $object );
my $id = $live_objects->object_to_id( $object );
my $obj = $live_objects->id_to_object( $id );
my $scope = $live_objects->new_scope;
DESCRIPTION
This object keeps track of the set of live objects, their associated IDs, and the storage entries.
ATTRIBUTES
clear_leaks
Boolean. Defaults to false.
If true, when the last known scope is removed but some objects are still live they will be removed from the live object set.
Note that this does NOT prevent leaks (memory cannot be reclaimed), it merely prevents stale objects from staying loaded.
leak_tracker
This is a coderef or object.
If any objects are leaked (see "clear_leaks") then the this can be used to report them, or to break the circular structure.
When an object is provided the "leaked_objects" method is called. The coderef is simply invoked with the objects as arguments.
Triggered after "clear_leaks" causes "clear" to be called.
For example, to break cycles you can use Data::Structure::Util's "circular_off" function:
use Data::Structure::Util qw(circular_off);
$dir->live_objects->leak_tracker(sub {
my @leaked_objects = @_;
circular_off($_) for @leaked_objects;
});
keep_entries
EXPERIMENTAL
When true (the default), KiokuDB::Entries loaded from the backend or created by the collapser are kept around.
This results in a considerable memory overhead, so it's no longer required.
METHODS
insert
Takes pairs, id or entry as the key, and object as the value, registering the objects.
objects_to_ids
object_to_id
Given objects, returns their IDs, or undef for objects which not registered.
objects_to_entries
object_to_entry
Given objects, find the corresponding entries.
ids_to_objects
id_to_object
Given IDs, find the corresponding objects.
ids_to_entries
Given IDs, find the corresponding entries.
update_entries
Given entries, replaces the live entries of the corresponding objects with the newly updated ones.
The objects must already be in the live object set.
This method is called on a successful transaction commit.
new_scope
Creates a new KiokuDB::LiveObjects::Scope, with the current scope as its parent.
current_scope
The current KiokuDB::LiveObjects::Scope instance.
This is the scope into which newly registered objects are pushed.
new_txn
Creates a new KiokuDB::LiveObjects::TXNScope, with the current txn scope as its parent.
txn_scope
The current KiokuDB::LiveObjects::TXNScope.
clear
Forces a clear of the live object set.
This removes all objects and entries, and can be useful in the case of leaks (to prevent false positives on lookups).
Note that this does not actually break the circular structures, so the leak is unresolved, but the objects are no longer considered
live by the KiokuDB instance.
live_entries
live_objects
live_ids
Enumerates the live entries, objects or ids.
rollback_entries
Called by "rollback" in KiokuDB::LiveObjects::TXNScope.
remove
Removes entries from the live object set.
remove_scope $scope
Removes a scope from the set of known scopes.
Also calls "detach_scope", and calls "KiokuDB::LiveObjects::Scope/clear" on the scope itself.
detach_scope $scope
Detaches $scope if it's the current scope.
This prevents "push" from being called on this scope object implicitly anymore.
perl v5.12.4 2011-03-31 KiokuDB::LiveObjects(3pm)
