I'm trying to run clusterKnoppix live cd from a couple machines but it only works from one computer. The other three, my toshiba laptop, emachine, and hp machine can't find the filesystem.. the live cd stops booting and gives me a error saying it couldn't find knoppix filesystem and then gives me a couple commands to work with.. mount, umount.. and a couple more.
I noticed that the machine that worked, my gateway, looked in /dev/scd1 or 0 don't remember.. the other machines don't even look in this file.
When I login to the live console of my server and go to the console, I am getting the below message
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path... (11 Replies)
Hi Guys,
I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
... (5 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
I have installed Solaris 10 OS in Sun Virtual Box that uses x86 32 bit system. After an abnormal shutdown i'm getting the following message on the console when i try to boot.
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use... (3 Replies)
I installed solaris virtually and tried to format the partitions .. I dont know what went wrong, It got rebooted and hangs in the screen "No partitions" and after pressing Enter button it goes to "INT18 boot failure" and hangs there once again . Could any one of you suggest why this has happened... (3 Replies)
Hi all
I used a dual boot operating system and it works fine for me. Now , i install a Ati radeon 9250 Agp card on my system and this results in boot failure of fedora 6. The graphics card is working fine with windows XP , i.e i have no compatibility issues.The system also refuses to boot when i... (2 Replies)
Hello.
System is a HP Visualize C3600 running X11 and after a power failure machine will not boot (see error messages below)
From what I've read, this may be caused by a corrupted etc/inittab file. Solution suggested on other websites is to boot in single user mode and edit file inittab... (2 Replies)
MIC-IMAGE-CONVERTOR(1) General Commands Manual MIC-IMAGE-CONVERTOR(1)NAME
mic-image-convertor - Convert a virtual machine image to a live image
SYNOPSIS
mic-image-convertor [options]
DESCRIPTION
mic-image-convertor can convert a virtual machine image to a live image, this is specially for developers, they will use VMWare player or
KVM or VirtualBox to run this image and do some changes in place, then they convert this changed image to a live image to run in a real
device.
mic-image-manager has a GUI tool for mic-image-convertor, you can use it if you prefer to use GUI instead of command line.
General OPTIONS--version show version number and exit
-h, --help show this help message and exit
-F SRCFORMAT, --source-format=SRCFORMAT Source image format, possible values are: raw, vmdk or vdi (default: automatically detect image
type).
-I SRCIMG, --source-image=SRCIMG Source image which was created by mic-image-creator or an image file system.
-T DSTFORMAT, --target-format=DSTFORMAT Target image format, possible values are: livecd and liveusb
-t TMPDIR, --tmpdir=TMPDIR Temporary directory to use (default: /var/tmp)
-o OUTDIR, --outdir=OUTDIR Output directory to use (default: current work dir)
-S SUFFIX, --suffix=SUFFIX Image name suffix (default: date stamp)
OPTIONS For Live USB-i, --interactive Directly write into a USB disk.
--fstype=FSTYPE File system type for live USB image, ext3 or vfat, the default is vfat.
--overlay-size-mb=OVERLAYSIZEMB Overlay size in MB as unit, it means how size changes you can save in your live USB disk.
Debug OPTIONS-d, --debug Output debugging information
-v, --verbose Output verbose progress information
--logfile=FILE Save debug information to FILE
EXAMPLES
Convert a VMWare image to a live CD image:
mic-image-convertor -I your-vmware-image.vmdk -T liveusb
EXIT STATUS
mic-image-convertor returns a zero exist status if it succeeds, otherwise return non-zero and print error message.
AUTHOR
Yi Yang, Anas Nashif, Jianfeng Ding
SEE ALSO mic-image-creator(1), mic-chroot(1), mic-image-writer(1), mic-livecd-iso-to-disk(1), mic-image-manager(1)perl v5.12.3 2011-05-31 MIC-IMAGE-CONVERTOR(1)